• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.238-241
• /
• 2010

The purification of indole from 54.3wt% indole fraction (temperature range of distillate: $250{\sim}255^{\circ}C$) recovered by extraction-distillation combination of coal tar fraction (temperature range of distillate: $240{\sim}265^{\circ}C$) was examined by solute crystallization. The feed consists of eight components such as quinoline, iso-quinoline, indole, quinaldine, 1-methylnaphthalene, 2-methylnaphthalene, biphenyl and phenyl ether. Hexane and an aqueous solution of methanol (50 : 50 vol%) were used as the crystallization solvent and the coolant, respectively. A batch stirred tank of glass material was used as a crystallization apparatus. By increasing the operation temperature and the volume ratio of solvent to feed at initial, the purity of indole increas ed, but yields of indole showed a decreasing tendency. Solute crystallization method using hexane as a solvent was excellent because the purity of 99.3 wt% indole was recovered at the yield of 50% without washing operation.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.31-39
• /
• 2005

This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.

• Science of Emotion and Sensibility
• /
• v.18 no.3
• /
• pp.17-24
• /
• 2015

This study investigated heat generation characteristics of knitted and woven intelligent garments made of ZrC imbedded yarns through thermal manikin measurement. These emotional and intelligent thermal characteristics by thermal manikin measurement were analysed and compared with light/thermal radiation experimental results. Surface temperature of ZrC imbedded woven and knitted fabrics by light/thermal radiation measurement was $4^{\circ}C$ and $2^{\circ}C$ higher than that of regular PET control fabrics, respectively. Clo value as heat generation characteristics of ZrC imbedded woven and knitted garments with light exposure was 0.14 and 0.08 higher than that of regular PET control garments, respectively. These results were attributed to the far-infrared thermal radiation from ZrC imbedded in the core part of the intelligent bi-component filament, which was verified by far-infrared emissive power ranged between $6{\mu}m$ and $20{\mu}m$ through FT-IR experiment and by inclusion of Zr through EDS ingredient analysis. However, compressibility of ZrC imbedded woven fabric was lower than that of regular PET one, and bending rigidity was higher than that of regular one, which resulted in a little stiff tactile hand property of ZrC imbedded fabric. We found that ZrC imbedded intelligent woven and knitted fabrics were applicable to the intelligent garment as a heat generation textile material by thermal manikin measurement.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.82-96
• /
• 2023

The purpose of this study is to enhance the usability of hanji fabrics by expanding the color space of hanji fabrics. For the expression of various colors of hanji fabrics, single and combination dyeing were carried out using natural indigo(Niram, Polygonum tinctorium), marigold extract colorant, and madder extract colorant for three types of hanji fabrics with different fiber compositions(hanji, hanji/cotton, hanji/silk). The light, medium, and deep colors obtained through individual single dyeing were shown to be PB Munsell colors in the case of indigo dyeing, Y color for marigold dyeing, and R color for madder dyeing. For combination dyeing, indigo dyeing was first carried out under the conditions for light, medium, and deep colors, respectively, and marigold or madder dyeing was performed thereafter. Indigo and marigold combination dyeing produced PB, B, BG, G, and GY Munsell colors and indigo and madder combination dyeing produced PB, P, RP, and R Munsell colors. Overall, the color change of hanji/silk fabric was more diverse than that of hanji fabric and hanji/cotton fabric. In the indigo, marigold, and madder combination dyeing into individual deep colors, blackish PB and P Munsell colors was obtained. Colorfastness to washing, dry cleaning, rubbing, and light were relatively good with above rating 4. Finally, 9 colors excluding YR color out of 10 Munsell color were obtained. We confirmed that the expansion of the color space of Hanji fabrics by the single and combination dyeing with indigo, marigold, and madder.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.4
• /
• pp.574-585
• /
• 2009

This study intended to identify regional and gender differences between high school students groups in clothing-wearing motives, casual brand preference and actual purchasing condition. Using a $2{\times}2$ sampling frame, 100 responses were collected for each regional and gender group: male students in Seoul, females in Seoul, males in Gumi, and females in Gumi. In terms of clothing-wearing motives, Gumi students and female students showed more highly extroverted motives than males and Seoul students, respectively. And three groups were determined on the basis of clothing-wearing motives: the extroversion group, the introversion group, and the least clothing-cognizing group. Concerning the brand preference factor, female students showed more dispersed brand preference than males. Adidas and Puma were preferred by all 4 groups. Polo and Guess were preferred by Seoul students, and Clide, Banila B, and TBJ were preferred by female students. The determinants of brand preference were identified as quality, reliability, affirmative image, and some brand personas such as 'neat', 'natural' and 'polished'. The students from Seoul tend to pay more money for clothing than those from Gumi, and Seoul students' main purchasing place was identified as department store while Gumi students shop more at brand chain stores.

• Science of Emotion and Sensibility
• /
• v.17 no.1
• /
• pp.93-104
• /
• 2014

This paper investigates the physical properties such as water absorption, drying and hygral expansion of moisture responded transformable fibers and their knitted fabrics including dyeing characteristics according to the different dyeing time and temperature. For this purpose, three kinds of covered filament yarn specimens using HEF and spandex as core and PET, aerocool as a covering filament were prepared. The knitted fabric specimens were made using three kinds yarn specimens and dyed with different dyeing temperature and time. The moisture absorption, drying and hygral expansion of three kinds of knitted fabric specimens were measured and discussed with yarn structure. The wearing performance of these knitted fabric specimens were also measured and discussed with yarn characteristics using FAST system. Finally, the dyeing characteristics such as dye affinity, color difference and color fastness to washing of these knitted fabric specimens were measured and discussed with different dyeing temperature and time for examining dyeing process performance of these moisture responded transformable knitted fabrics.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.929-938
• /
• 2007

The purpose of this study was to explore the consumers' purchasing pattern and dissatisfaction with the quality of the jean pants. A total of 695 men and women completed the questionnaire. The questionnaire for the survey measured consumer's jean pants purchasing pattern and dissatisfaction for quality. The results of this study showed that men bought higher priced jeans. Women in their twenties purchased and worn jeans frequently and men and women in age 20s mainly bought jeans at wholesale stores or department stores; but, majority of subjects in their thirties bought jeans at discount stores. Consumer's dissatisfaction with the quality of jean pants was significantly different among the groups by age, gender or their pursuing buying benefit. The men and women in age 30s were dissatisfied with harshness of the denim fabric. The subjects, who highly concerned on the aesthetic value, were dissatisfied with the inconsistence color of the jean pants after washing. Men and women who valued the functional performance of jean pants, were dissatisfied with low sweat absorbancy of jean pants material. The results of this study showed that the consumer's buying pattern for jean pants were differentiated by their age and gender. These results imply that jean pants manufacturers should develop jean pants to meet the needs of their target market. The jean pants, which were manufactured for discount stores, should be made of fabrics with good sweat absorbancy and soft hand. The fashion jean pants, which were targeted for women seeking aesthetic values, should be improved to maintain color consistency of the fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.462-473
• /
• 2008

In recent years, Korea's apparel exports to the USA have faced a great threat, as the trade environment around the world has changed continually. The purpose of this study is to analyze the competitive position of Korean apparel exports to the USA, and to enhance export competitiveness by applying to offshore sourcing. The trade data of the Office of Textiles and Apparel(OTEXA) in the U.S. Department of Commerce were selected for inquiry about export competitiveness of apparel products made in Korea. In addition, we targeted members of the Korea Apparel Industry Association among the 500 exporters of clothing items in "The Import and Export Textile Product 2003." A total 70 sheets were analyzed. The results of this study were as follows: 1) Korean apparel exports to USA have decreased by 20-35 percent per year since 2005 under the Free Trade Area, showing that Korean apparel industries have not adapted to the new trade environment. Although Korean apparel exports to USA have indicated a trade surplus from now on, Korean apparel industries should find new ways to overcome this situation, diminishing exports and increasing imports. 2) Korean apparel companies selected more offshore sourcing than domestic sourcing. Also, as Korean apparel companies manufactured apparel products offshore, foreign subcontracting outranked manufacturing in their own foreign plants. When they chose foreign countries to source, they turned mainly to China and Vietnam. Also, they considered the target country's manufacturing price, labor stability, apparel products, quality, lead time, and so on. In order to increase apparel exports, Korean apparel industries should focus more on developing competitively new apparel products, improving the ability of sourcing management, and establishing on-the-spot agencies.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.586-592
• /
• 2012

Iron oxides ($Fe_3O_4$) are metabolically secreted after endocytosed by cells, indicating no cytotoxicity. Therefore, they are widely used as a contrast agent before photographing of magnetic resonance imaging. In this study, iron oxide nanoparticles are synthesized by the co-precipitation method and subsequently immobilized with a homing peptide (AP), which specifically interacts with interleukin-4 receptor located on the membrane of endothelial and bladder cancer cells. The size of AP-immobilized iron oxide particle is about 39 nm. Intracellular uptake of the AP-immobilized iron oxide nanoparticles was investigated using bladder cancer cells and fibroblasts as the control. As the result, the nanoparticles are specificially uptaken by bladder cancer cells. However, the nanoparticles are not specificially uptaken by fibroblast. It could be said that the AP-immobilized iron oxide nanoparticles have a potential to be used as a contrast agent for early diagnosis of cancer.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.105-110
• /
• 2008

The high-purity purification of 2,6-dimethylnaphthalene (2,6-DMN, 10.43 wt%) from the concentrate of DMN isomers recovered from light cycle oil (LCO) through distillation-extraction combination was examined by a crystallization operation. To select the most suitable crystallization solvent for purification of 2,6-DMN, several conventional solvents, which have been employed commercially as crystallization solvents for high-purity performance, were tested, through measurement of purity and yield of 2,6-DMN. The solvents used were acetone, cyclohexanone, ethanol, ethyl ether, ethyl acetate, isopropyl ether, methanol, n-hexane, n-heptane, pyridine, THF, toluene, and a mixture of methanol and acetone. The mixture of 60 vol% methanol and 40 vol% acetone (M/A = 1.5) was found to be suitable for purification of 2,6-DMN in the concentrate of DMN isomers based on purity and yield. Increasing the operation temperature and the volume ratio of solvent (M/A = 1.5) to feed (concentrate of DMN) resulted in improving the purity of 2,6-DMN, whereas the yield decreased. The crystal recovered by crystallization run using the concentrate of DMN isomers contained about 76 wt% 2,6-DMN. Furthermore, for recovery of high-purity 2,6-DMN, crystal containing 76 wt% 2,6-DMN was crystallized. As a result, crystal with 99.7 wt% 2,6-DMN was recovered with 40% yield.