• Advances in environmental research
• /
• 제5권1호
• /
• pp.61-77
• /
• 2016

$NanoTiO_2$ was synthesized by ultrasonication assisted sol-gel process and subjected to iron doping and carbon-iron codoping. The synthesized catalysts were characterized by XRD, HR-SEM, EDX, UV-Vis absorption spectroscopy and BET specific surface area analysis. The average crystallite size of pure $TiO_2$ was in the range of 30 - 33 nm, and that of Fe-$TiO_2$ and C-Fe $TiO_2$ was in the range of 7 - 13 nm respectively. The specific surface area of the iron doped and carbon-iron codoped nanoparticles was around $105m^2/g$ and $91m^2/g$ respectively. The coupled semiconductor photo-Fenton's activity of the synthesized catalysts was evaluated by the degradation of a cationic dye (C.I. Basic blue 9) and an anionic dye (C.I. Acid orange 52) with concurrent investigation on the operating variables such as pH, catalyst dosage, oxidant concentration and initial pollutant concentration. The most efficient C-Fe codoped catalyst was found to effectively destruct synthetic dyes and potentially treat real textile effluent achieving 93.4% of COD removal under minimal solar intensity (35-40 kiloLUX). This reveals the practical applicability of the process for the treatment of real wastewater in both high and low insolation regimes.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.655-658
• /
• 2009

본 연구는 철 성분 응집제가 염색폐수 처리공정에서 슬러지 발생에 미치는 영향에 대한 연구로 응집제로 $FeCl_3$, $FeSO_4$, $Al_2(SO_4)_3$를 사용하였다. 본 연구의 목적은 염색폐수처리공정에서 발생되는 폐수를 응집제를 이용하여 처리할 때 부수적으로 발생되는 슬러지의 양을 감량하며, 응집제가 색도제거에 미치는 영향에 대한 상관성을 규명 하는데 그 목적이 있다. 실험에 사용된 염색폐수의 BOD, COD, pH, 그리고 색도의 평균값은 각각 800 mg/L, 600 mg/L, 9.7, 102 이었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.194-197
• /
• 2000

The color of textile-wastewater hindered spectrometric measurements of $H_2O_2$ and enzyme activity during enzymatic decoloring. By using ABTS, we developed a new method for measuring peroxidase activity and $H_2O_2$ concentration. The ratio of enzyme and $H_2O_2$ was optimized as 1:150 by investigating the effects of $H_2O_2$ on enzymatic decoloring. Pulse feeding of $H_2O_2$, upon depletion, significantly increased the decoloring of Congo Red.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.285-286
• /
• 2005

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.837-845
• /
• 2017

D염색공단의 폴리에스테르 알카리 감량폐수 및 호발폐수가 혼합된 실제 종합염색폐수를 처리하기 위하여 D염색공단의 종합폐수처리장 반송슬러지를 고정한 폐타이어담체를 충전한 재순환 유동상 바이오필터와 소성된 $TiO_2$ 코팅-glass bead를 광촉매담체로 적용한 UV/광촉매반응기를 결합한 재순환 통합시스템을 구축하여 운전하였다. 그 결과로서 재순환 통합시스템의 총 $COD_{cr}$ 제거율과 총 색도 제거율 추이는 각각 약 81% 및 55% 정도를 유지하였다. 이러한 재순환 통합시스템의 총 $COD_{cr}$ 및 총 색도 제거율의 제고효과는 각각 최대 약 7% 및 3%로 평가되었다. 재순환 통합시스템의 유동상 바이오필터 및 광촉매반응공정은 총 제거율에 대한 상대기여도로서 각각 총 $COD_{cr}$ 제거율의 약 94% 및 6%를 처리하고, 총 색도 제거율의 약 86% 및 14%를 처리하였다. 이와 같이 재순환 통합시스템의 광촉매반응공정에서는 총 제거율에 대한 색도 제거율의 상대기여도가 $COD_{cr}$ 제거율의 상대기여도보다 약 2.4배 정도 컸다. 따라서 본 연구의 재순환 통합시스템에서 광촉매반응공정은 $COD_{cr}$ 제거보다 아조결합과 같이 염료에서 색을 나타내는 화학결합을 깨는 역할에 더욱 효율성이 있었다. 또한 본 연구의 재순환 통합시스템에서 각 단위공정들의 $COD_{cr}$ 및 색도 제거율이, 재순환 통합시스템의 총 $COD_{cr}$ 및 색도 제거율에 미치는 영향에 대한 모델식과 대수적 상관관계를 구하고 분석하였다.

• 대한환경공학회지
• /
• 제27권9호
• /
• pp.917-922
• /
• 2005

섬유 염색폐수는 PVA, 유기정련제, 각종 염료 등이 함유되어 있어 처리가 매우 어려운 난분해성 유기폐수로 분류되어 있다. 본 연구에서는 생물학적 처리방법으로 염색폐수의 난분해성 유기물질을 효과적으로 처리할 수 있는 방안으로 활성슬러지를 PEG(Polyethylene glycol)에 포괄고정화한 담체를 고정상 반응기를 이용한 공정에 적용시켜 난분해성 유기물질의 처리효율을 평가하고 적정 운전인자를 검토하였다. 별도로 적응과정을 거치지 않은 활성슬러지를 고정화한 담체를 고정상 반응기에 충전하여 호기성 상태에서 연속식으로 운전하였다. 이때 유입수는 $SCODE_{Cr}$ 약 330 mg/L, $SBOD_5$ 20 mg/L 이하의 생물학적 1차 처리수를 사용하였다. 체류시간의 변화에 따른 각 반응기의 난분해성 유기물질 제거효율을 비교한 결과 EBCT 6 hr을 제외하고는 모두 50% 이상의 유기물($CODE_{Cr}$) 제거효율을 보였고 $COD_{Mn}$의 경우 배출허용기준치 90 mg/L보다 평균 18 mg/L 이상 낮았다. EBCT $6{\sim}24\;hr$ 결과들을 비교한 결과 EBCT 8 hr이 유기물 제거효율과 배출허용기준을 고려할 때 경제적이고 안정된 효율을 얻을 수 있는 적정 체류시간으로 나타났다. 또한 반응기에 충분한 DO를 공급하기 위하여는 주입공기 선속도를 $7\;m^3/m^2{\cdot}hr$ 이상으로 해 주어야 하는 것으로 나타났다. 또한 담체내부 미생물을 동정한 결과 PAH, PVA, Phenol 등 난분해성 물질을 분해하는 균주가 성장하고 있었다. 한편, 고정화담체를 131일에 걸쳐 관찰한 결과 압축강도와 담체내부로의 물질확산에 큰 변화가 없는 것으로 나타났다. 포괄고정화 담체를 이용한 염색폐수처리에서 고정상 반응기는 기존 활성슬러지 공정의 후처리로서 적용 가능할 것으로 판단되어진다.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.26-36
• /
• 2007

This study was carried out to treat the aqueous solutions containing reactive dyes(RB19, RR120 and RY179) by the Ozone demand flask method and adsorption process using activated carbon fiber(ACF) which are one of the main pollutants in dye wastewater. Ozone oxidation of three kinds of the reactive dyes was examined to investigate the reactivity of dyes with ozone, competition reaction and ozone utilization on various conditions for single- and multi-solute dye solution. Concentration of dyes was decreased continuously with increasing ozone dosage in the single-solute dye solutions. Competition quotient values were calculated to investigate the preferential oxidation of individual dyes in multi-solute dye solutions. Competition quotients(CQi) and values of the overall utilization efficiency, ${\eta}O_3$, were increased at 40mg/l of ozone dosage in multi-solute dye solutions. ACF(A-15) has much larger specific surface area$(1,584m^2/g-ACF)$ in comparison with granular activated carbon adsorbent (F400, $1,125m^2/g-GAC$), which is commonly used, and most of pores were found to be micropores with pore radius of 2nm and below. It was found that RB19 was most easily adsorbed among the dyes in this study. In the case of PCP (p-chlorophenol) and sucrose, which are single component adsorbate, adsorption capacities of ACF(A-15) were in good agreement with the batch adsorption measurement, and saturation time predicted of ACF columns for these components was also well agreed with practically measured time. But in the case of reactive dyes, which have relatively high molecular weight and aggregated with multi-components, adsorption capacities or saturation time predicted were not agreed with practically measured values.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.250-257
• /
• 2021

Laundry industry has traditionally been considered an industry that generates large amounts of wastewater and Volatile Organic Compounds(VOCs). This is still the case until now. Household laundry detergents are produced and distributed within the safety regulations on the amount of harmful substances detected. While industrial laundry detergents are often distributed without safety regulations, and even laundry workers manufacture and use them on their own. This contaminates water and air and also threatens the safety of workers. This study is a basic study for distributing eco-friendly detergents(EFD-A) developed through previous studies to the laundry industry. Safety, washability and wastewater quality of EFD-A are evaluated. Three existing commercial detergents(PD1, PD2, LD4) are also evaluated to compare with EFD-A. The safety of detergents is confirmed by the content of optical brightener, VOCs, and arsenic. Washability is evaluated by the difference in reflectance of washed and unwashed artificial soiled fabrics according to detergent concentration, washing temperature, and washing time. TOC is used as the index of assessing the wastewater quality. The results are as follows; EFD-A doesn't contain the optical brighteners, VOCs, and arsenic. The optimal washing conditions for EFD-A are 3 g/L concentration, 40 ℃ washing temperature, and 30 min washing time. The soil removal efficiency is about 71 %, which was similar to or somewhat superior to that of PD1, PD2, and LD4. TOC is 63.5 %, which is about 15 % lower than the discharge limit. Through this study, the developed detergent EFD-A can be used as a safe and eco-friendly detergent for the human body and the environment.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.275-282
• /
• 2020

Hranfa's marl, a local natural mineral, is selected for the decontamination by adsorption of aqueous effluents in textile industry. Its physicochemical characterization is first performed. It is composed mainly of Calcite, Quartz, Ankerite and Muscovite. Its specific surface area is 40 ㎡ g^-1. Its adsorption performance is then tested in batch conditions using an industrial organic dye, Bemacid Red E-TL, as a model pollutant. The measured adsorption capacity of Hranfa's marl is 16 mg g^-1 which is comparable to that of other types of natural adsorbents. A hybrid process is tested coupling adsorption of the dye on marl in suspension and microfiltration. An adsorption reactor is inserted into the circulation loop of a microfiltration pilot using ceramic membranes. This makes possible a continuous extraction of the treated water provided that a periodic replacement of the saturated adsorbent is done. The breakthrough curve obtained by analyzing the dye concentration in the permeate is close to the ideal one considering that no dye will cross the membrane as long as the adsorbent load is not saturated. These first experimental data provide proof of concept for such a hybrid process.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.25-31
• /
• 2000

In order to decolorize disperse dyes by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. To increase the removal efficiency of decolorization in the aqueous solutions, the optimal condition of decolorization by this strain was investigated, and continuous plant test was also developed. The optimal culture conditions of temperature and pH were found to be 4$0^{\circ}C$ and 8.5~9, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest(93%) among the nitrogen sources. The strain to be screened was excellent to adjust to pH, and it seems to be have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_4\cdot{7H}_2O$ and $KH_2PO_4$ were 0.1%(w/v) and 0.2%(w/v). The result of continuous plant process using wastewater was as following : $COD_{Mn}$ removal efficiency was over than 50%, and this strain was very excellent in decolorization-efficiency for the wastewater of Taegu dyeing complex.