• 제목/요약/키워드: Tex Visualization

검색결과 747건 처리시간 0.028초

회전하는 나선형 미니채널 카트리지를 이용한 미세입자 정렬 (Alignment of Microbeads Using Spinning Helical Minichannel Cartridge)

  • 김수빈;비빈프라사드;김중경
    • 한국가시화정보학회지
    • /
    • 제14권3호
    • /
    • pp.38-45
    • /
    • 2016
  • Separation of particles based on different sizes, detection of pathogenic bacteria and isolation of leukocytes from whole blood are typical applications of spiral or helical microchannels. The present study focuses on developing a CD4+ T-cell counting device for monitoring HIV/AIDS patients with the aid of a helical minichannel used for a sample cartridge. For the experiment, $10{\mu}m$ sized microbeads were used for visualization with a fluorescence imaging system. Alignment of microbeads was investigated in a stationary and spinning sample cartridge filled with glycerol-water mixtures of different densities. The helical minichannel was spun using a DC motor controlled by an Arduino board with a Bluetooth shield. It was found that when the sample cartridge was made stationary, no bead alignment was achieved for a medium with density (0% and 20% glycerol) lower than that of the beads, but when it was spun at 2000-3000 rpm for 1-4 min, an alignment was obtained at the top of the channel facilitating optical detection and enumeration of those microbeads. Since an alignment of microbeads was achieved for a medium with density as that of blood plasma, the same approach can be applied for aligning and counting CD4+ T-lymphocytes in whole blood samples collected from patients.

기류 가시화기법을 이용한 방해기류 방향과 속도에 따른 푸쉬풀 후드 효율 평가 (Evaluation of Capture Efficiencies of Push-Pull Hood Systems by Cross Draft Directions and Velocities Using Smoke Visualization Technique)

  • 송세욱;김태형;하현철;강호경
    • 한국산업보건학회지
    • /
    • 제15권1호
    • /
    • pp.36-44
    • /
    • 2005
  • A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank in recent years. Efficiency of push pull hood system is affected by various parameters, such as cross draft, vessel shapes, size of tanks surface, liquid temperature, and so on. Among these, velocity of cross draft might be one of the most influencing factor for determining the ventilation efficiency. To take account of the effect of cross draft velocities over 0.38m/s, a flow adjustment of ${\pm}$20% should be considered into the push and +20% into the pull flow system Although there are many studies about the efficiency evaluation of push pull hood system based on CFDs(Computational Fluid Dynamics) and experiments, there have been no reports regarding the influence of velocities and direction of cross-draft on push-pull hood efficiency. This study was conducted to investigate the influence of cross draft direction and velocities on the capture efficiency of the push-pull ventilation system. Smoke visualization method was used along with mock-up of push-pull hood systems to verify the ventilation efficiency by experiments. When the cross-draft blew from the same origins of the push flows, the efficiency of the system was in it's high value, but it was decreased significantly when the cross-draft came from the opposite side of push flows Moreover, the efficiency of the system dramatically decreased when the cross-draft of open surface tank was faster than 0.4m/s.

PIV에 의한 직렬배열 상태에 놓인 3원주 주위의 유동장 가시화 (The Visualization of the Flowfield around Three Circular Cylinders in the Tandem Arrangement by the PIV)

  • 노기덕;장동휴;배형섭;김원철
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권2호
    • /
    • pp.264-270
    • /
    • 2011
  • 본 연구는 직렬배열 상태에 놓인 3원주 주위의 유동장 특성을 PIV를 이용하여 파악한 것이다. 실험은 레이놀즈수 Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$ 범위 내에서 수평간격비(P/D)를 P/D=1.25~3.75로 변화시켜가며 행하였다. 각각의 실험 파라메터에서 Strouhal 수, 와도변화, 순간 및 평균 속도벡터 및 속도분포를 측정하였으며 그 결과를 요약하면 다음과 같다. 3번째 원주 후방에서 측정한 Strouhal 수는 수평간격비 P/D에 따라 크게 3가지 영역으로 구분되며, 각 원주의 후류에서의 흐름 패턴은 이들 영역에 따라 달랐다. 각 원주 후방에서 시간평균 흐름은 거의 정체상태에 있었으며, 그 정체영역의 크기는 1번째, 2번째, 3번째 원주 순으로 작았다. 2번째 원주 전, 후방 영역에서는 받음각 미소 (${\alpha}= {\pm}5^{\circ}$)에 따라 서로 반대방향의 볼텍스가 형성했다.

The Near-Infrared Imaging Spectroscopy to Visualize the Distribution of Sugar Content in the Flesh of a Melon

  • Tsuta, Mizuki;Sugiyama, Junichi;Sagara, Yasuyuki
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1526-1526
    • /
    • 2001
  • To improve the accuracy of sweetness sensor in automated sorting operations, it is necessary to clarify unevenness of the sugar content distribution within fruits. And it is expected that the technique to evaluate the content distribution in fruits contribute to the development of the near-infrared (NIR) imaging spectroscopy. Sugiyama (1999) had succeeded to visualize the distribution of the sugar content on the surface of a half-cut green fresh melon. However, this method cannot be applied to red flesh melons because it depends on information of the absorption band of chlorophyll (676 nm), which is affected by the color of the fresh. The objective of this study was to develop the universal visualization method depends on the absorption band of sugar, which can be applied to various kinds of melons and other fruits. The relationship between the sugar contents and absorption spectra of both green and red fresh melons were investigated by using a NIR spectrometer to determine the absorption band of sugar. The combination of 2$\^$nd/ derivative absorbances at 902 nm and 874 nm was highly correlated with the sugar contents. The wavelength of 902 nm is attributed to the absorption band of sugar. A cooled charge-coupled device (CCD) imaging camera which has 16 bit (65536 steps) A/D resolution was equipped with rotating band-pass filter wheel and used to capture the spectral absorption images of the flesh of a vertically half-cut red fresh melon. The advantage of the high A/D resolution in this research is that each pixel of the CCD is expected to function as a detector of the NIR spectrometer for quantitative analysis. Images at 846 nm, 874 nm, 902 nm and 930 nm were acquired using this CCD camera. Then the 2$\^$nd/ derivative absorbances at 902 nm and 874 nm at each pixel were calculated using these four images. On the other hand, parts of the same melon were extracted for capturing the images and squeezed for the measurement of sugar content. Then the calibration curve between the combination of 2$\^$nd/ derivative absorbances at 902 nm and 874 nm and sugar content was developed. The calibration method based on NIR spectroscopy techniques was applied to each pixel of the images to convert the 2$\^$nd/ derivative absorbances into the Brix sugar content. Mapping the sugar content value of each pixel with linear color scale, the distribution of the sugar content was visualized. As a result of the visualization, it was quantitatively confirmed that the Brix sugar contents are low at the near of the skin and become higher towards the seeds. This result suggests that the visualization technique by the NIR imaging spectroscopy could become a new useful method fer quality evaluation of melons.

  • PDF

가압중수형 원자로의 중성자 감속재 순환 유동가시화와 삼차원 전산해석 (Visualization and 3D Numerical Analysis of the Circulation Flow of the Neutron Moderator in a Heavy-Water Nuclear Reactor)

  • 엄태광;이재영
    • 대한기계학회논문집B
    • /
    • 제36권2호
    • /
    • pp.189-196
    • /
    • 2012
  • 현 운행중인 중수로의 안전장치인 감속재는 원전사고시 최종 열침원의 역할을 감당한다. 감속재 연구 수행을 위해 CANDU6 의 축소화 모델인 HUKINS 는 최대출력 10kW 로, 칼란드리아 직경은 원모델의 1/8 에 해당하는 0.95m 이며 축방향 길이가 38.4mm 의 열원 88 개가 삽입되어 있다. HUKINS 내 감속재 유동패턴의 발생 여부를 판단하고자 화학처리기법을 활용하였고 그 결과 출력파워 약 7.7kW 에서 각입력유량을 4,7,11L/min 으로 유입시 감속재의 유동패턴이 부력기조유동, 혼합양상유동, 모멘텀 기조유동의 양상을 나타났다. 3 가지 유동패턴에 대해 육면체 격자를 기본으로 구성된 약 190 만개의 격자수 내에서 난류모델 $k{\varepsilon}$의 예측결과와 실험결과간에 유사성을 보임으로써 HUKINS 가 CANDU6 감속재 유동의 실험적 연구에 사용 가능함을 입증했다.

총담관낭종의 $^{99m}Tc$-DISIDA 간담도 스캔 (Scintigraphic Features of Choledochal Cyst Using Technetium-99m-DISIDA Hepatobiliary Scan)

  • 최정일;김정균;배선근;곽동석;정병천;이재태;이규보;전석길;이형우
    • 대한핵의학회지
    • /
    • 제27권1호
    • /
    • pp.71-80
    • /
    • 1993
  • In order to evaluate the scintigraphic features of choledochal cyst and these diagnostic value, authors investigated the findings of fourteen patients with choledochal cyst undergone hepatobiliary scan with $^{99m}Tc$-DISIDA before surgery. Five cases demonstrated the decreased hepatic uptake at 5-minute image of which four cases revealed severe jaundice. Seven cases demonstrated visualization of the cystic dilated common bile duct within 1 hour after injection. Two cases showed the cyst activity between 1 and 12 hours, but the cyst activity was not visible in five cases. Nonvisualization of the gall bladder was noted in ten cases, while four cases demonstrated visualization of the gall bladder within 1 hour. The time of visualization of gut activity was variably delayed. The intestinal activity was found in three cases within 1 hour and appeared in three cases between 1 and 2 hours and eight cases showed no visible gut activity. In four cases, intrahepatic ductal prominence was visible on the scintigram. Seven cases showed early and persistent accumulation of tracer in the common bile duct. Three cases showed persistent photon-deficient area in the gall bladder region. Two cases showed early photon-deficient area around gall bladder region with progressive accumulation of tracer in the same region. Two cases showed no evidence of activity in the biliary tract but noted late excretion into the small intestine. We concluded that hepatobiliary scan using $^{99m}Tc$-DISIDA is a noninvasive test useful in the evaluation and the diagnosis of choledochal cyst.

  • PDF

생물 의료 정보의 효과적인 텍스트 시각화 (Effective text visualization for biomedical information)

  • 김탁은;박종철
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2007년도 학술대회 1부
    • /
    • pp.399-405
    • /
    • 2007
  • 생물 의료 분야에서 정보의 양이 아주 빠르게 증가하고 있다. 이러한 방대한 양의 정보에서 유용한 정보를 추출하기 위해 텍스트 마이닝 기법을 이용한 연구들이 많이 진행되어 왔다. 그렇지만 이렇게 뽑아진 정보조차 그 양이 방대하고, 또한 텍스트로 되어 있기 때문에 직관적으로 이해하기가 어렵다. 따라서 이러한 정보들을 좀 더 직관적으로 이해하기 위해서는 정보 시각화 시스템이 필수적이다. 최근 들어 이러한 정보 시각화에 대한 연구가 많이 진행되었으나 이러한 시각화 정보조차 너무나 방대하기 때문에 사용자가 필요로 하는 정보를 여과해 주는 방법이 필요하다. 그리고 시각화 시스템에서의 지식 발견을 위한 방법을 제공하여야 한다. 본 논문에서는 생물 의료 정보의 텍스트 시각화에 초점을 맞추어 생물 의료 정보의 효과적인 표현 방법과 지식 발견을 위한 직관적인 인터페이스를 제안하고자 한다.

  • PDF

COMBUSTION VISUALIZATION AND EMISSIONS OF A DIRECT INJECTION COMPRESSION IGNITION ENGINE FUELED WITH BIO-DIESOHOL

  • LU X.;HUANG Z.;ZHANG W.;LI D.
    • International Journal of Automotive Technology
    • /
    • 제6권1호
    • /
    • pp.15-21
    • /
    • 2005
  • The purpose of this paper is to experimentally investigate the engine pollutant emissions and combustion characteristics of diesel engine fueled with ethanol-diesel blended fuel (bio-diesohol). The experiments were performed on a single-cylinder DI diesel engine. Two blend fuels were consisted of $15\%$ ethanol, $83.5\%$ diesel and $1.5\%$ solublizer (by volume) were evaluated: one without cetane improver (E15-D) and one with a cetane improver (E15-D+CN improver). The engine performance parameters and emissions including fuel consumption, exhaust temperature, lubricating oil temperature, Bosch smoke number, CO, NOx, and THC were measured, and compared to the baseline diesel fuel. In order to gain insight into the combustion characteristics of bio-diesohol blends, the engine combustion processes for blended fuels and diesel fuel were observed using an Engine Video System (AVL 513). The results showed that the brake specific fuel consumption (BSFC) increased at overall engine operating conditions, but it is worth noting that the brake thermal efficiency (BTE) increased by up to $1-2.3\%$ with two blends when compared to diesel fuel. It is found that the engine fueled with ethanol-diesel blend fuels has higher emissions of THC, lower emissions of CO, NOx, and smoke. And the results also indicated that the cetane improver has positive effects on CO and NOx emissions, but negative effect on THC emission. Based on engine combustion visualization, it is found that ignition delay increased, combustion duration and the luminosity of flame decreased for the diesohol blends. The combustion is improved when the CN improver was added to the blend fuel.

스크램제트 엔진용 공기 보조형 인젝터의 분무 가시화 및 미립화 특성에 관한 연구 (Study on Spray Visualization and Atomization Characteristics of Air-assist Type Injector for Scramjet Engine)

  • 이진희;이상훈;이경재;김재호;양수석
    • 한국추진공학회지
    • /
    • 제21권5호
    • /
    • pp.88-96
    • /
    • 2017
  • 재생냉각 기술을 적용한 스크램제트 엔진 개발의 일환으로 스크램제트 엔진에 사용될 공기 보조형 인젝터(Air-assist type injector)에 대한 연구를 수행하였다. 실험에 사용된 인젝터는 주 유동에 대해 $90^{\circ}$$60^{\circ}$의 각도로 분출되는 두 종류의 인젝터를 사용하였으며 측정 방법에는 미 산란(Mie-scattering)을 이용한 가시화 측정방법과 PDPA를 이용한 미립화 측정 방법을 사용하였다. 실험 결과, 공급되는 기체의 압력 증가와 노즐로부터의 거리가 증가할수록 더 좋은 미립화 특성을 보였으며 분출각도가 $60^{\circ}$인 인젝터가 $90^{\circ}$의 인젝터보다 더 좋은 미립화 특성을 보였다.

마이와이 표준의 열 센서망의 3차원 실시간 자료 시각화를 위한 가상 현실 모델링 언어 데이터베이스 액세스 (VRML Database Access for 3D Real-time Data Visualization in MiWiTM Thermal Wireless Sensor Network)

  • 만설분;양의;최검;정도;마려
    • 전자공학회논문지
    • /
    • 제49권12호
    • /
    • pp.164-170
    • /
    • 2012
  • 본 논문에서는 중국 현지 염색 기업의 열 센서망에 적용 가능한 원격 가상 현실 제어 플랫폼에서 실행할 수 있는 데이터베이스 액세스를 가상 현실 모델링 언어 (VRML)를 소개하였다. 또한, 3차원 실시간 자료 시각화를 위한 가상 현실 모델링 언어-액티브엑스 서버 페이지(VRML-ASP)를 소개하였다. 나아가 이와 관련된 스크립트도 다루었을 뿐만 아니라, 열 센서 노드와 센서 영역에서의 움직임을 분석하였다. 이 데이터베이스 프레임워크는 마이크로칩에서 발표한 마이와이$^{TM}$($MiWi^{TM}$)의 표준에 최적화되었다. 이러한 분석 결과를 근거로, 시스템 구성에 따라 가상 현실 모델링 언어-액티브엑스 서버 페이지(VRML-ASP) 데이터 액세스 프레임워크가 가상 현실 원격 산업 공정 제어 시스템을 위한 하나의 경쟁력 있는 데이터 관리 해결책이 될 수 있음을 확인할 수 있었다.