• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.207-215
• /
• 2006

The characteristic floc growth of Al-based coagulants was investigated in the aspect of mixing intensity and visualization of generated flocs during coagulation and flocculation processes. Zeta potential of turbid particles in the artificial water nearly approached to zero at pH 8-9, in which TDS and conductivity were minimized. The removal rate of turbidity and phosphate was maximized at the optimal mixing intensity of rapid and slow mixing stages. After the rapid mixing stage of coagulation process, small particles ($3-5{\mu}m$) were abruptly generated, and higher mixing intensity made more numbers of flocs. With the progress of slow mixing stage, the number of small particles were decreased with the simultaneous increase of intermediate particles ($7-21{\mu}m$). The number of large particles (>$23{\mu}m$) were maximized at the lowest rapid mixing intensity of $95.1sec^{-1}$, whereas small particles (<$5{\mu}m$) were maximized at the highest rapid mixing intensity of $760.7sec^{-1}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.389-395
• /
• 2017

This study was performed to provide the information of the soot formation behavior of octane single fuel droplet under the identical combustion conditions. To achieve this, this experimental study provide the results of the soot formation characteristics of octane droplet in accordance with different initial droplet diameter($d_0$), at the same time, experiment was conducted under the same combustion conditions which are 1.0atm of ambient pressure($P_{amb}$), 21% of oxygen concentration($O_2$) and 79% of nitrogen concentration($N_2$). Visualization of octane droplet combustion was performed by visualization system with high speed camera. The results of maximum soot volume fraction($f_{vmax}$) was almost the same under the equivalent ambient conditions regardless of initial droplet diameter. Furthermore, maximum soot volume fraction was showed the higher value in the measuring direction between $135^{\circ}$ and $315^{\circ}$ since the soot-tail is generated during two opposing igniters movement process.

• Physical Therapy Rehabilitation Science
• /
• v.4 no.1
• /
• pp.28-31
• /
• 2015

Objective: Psychomotor imagery has been widely used to improve motor performance and motor learning. Recent research suggests that during visualization, changes occur in neurophysiological networks that make physical practice more effective in configuring functional networks for skillful behaviors. The aim of our pilot study was to determine if there was change and to what extent there was differentiation in modulation in electroencephalography (EEG) frequencies between visualizing a state of rest and a state of exercise performance and to identify the preponderant frequency. Design: Quasi-experimental design uncontrolled before and after study. Methods: EEG brain wave activity was recorded from 0-40 Hz from nine cerebral cortical scalp regions F3, Fz, F4, C3, Cz, C4, P3, POz, and P4 with a wireless telemetric EEG system. The subjects, while sitting on a chair with eyes closed, were asked to visualize themselves in a state of routine rest/relaxation and after a period of time in a state of their routine exercise performance. Results: The gamma frequency, 31-40 Hz, (${\gamma}$) was the predominant wave band in differentiation between visualizing a state of rest versus visualizing a state of exercise performance. Conclusions: We suggest these preliminarily findings show the EEG electrocortical activity for athletes is differentially modulated during visualization of exercise performance in comparison to rest with a predominant ${\gamma}$ wave band frequency observed during the state of exercise. Further controlled experimental studies will be performed to elaborate these observations and delineate the significance to optimization of psychomotor exercise performance.

• 연구논문집
• /
• s.23
• /
• pp.57-62
• /
• 1993

An experimental investigation was carried out to study the characteristics of concentration of a coaxial jet being tone excited and consisting of $CO_2$, and air. The concentration in a binary gas mixture was measured by using the hot-wire anemometer and flow visualization was performed by the schlieren technique. In the case of excited flow, it is found that acoustic energy is partially transferred to RMS concentration to enhance mixing.

• Journal of the Korean Vacuum Society
• /
• v.21 no.2
• /
• pp.69-77
• /
• 2012

Visualization of the electromagnetic vector fields are presented and examined with Mathematica. Vector fields may be used to represent a great of many physical quantities in various area of physics, including electromagnetism with vector differential operators. Because they deal with abstract, three-dimensional fields that are some times very difficult to visualize, electromagnetism can be conceptually rather difficult. Visual representation of such an abstract vector fields is invaluable to student or researchers working in this field and also helps teaching electromagnetism to physics or engineering students. Mathematica provides a wider range of graphical tools including plot of vector fields and vector analysis, which can be applied to visualization of electromagnetic system. We have visualized the most fundamental concepts of the electromagnetic vector $\vec{E}=-\vec{\nabla}_{\varphi}$, $\vec{D}={\epsilon}\vec{E}$, $\vec{\nabla}{\times}\vec{A}$, $\vec{B}={\mu}\vec{H}$, $\vec{B}={\mu}_0(\vec{H}+\vec{M})$, which are confirmed with vector calculations and valid graphically with some presentations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.8
• /
• pp.1111-1120
• /
• 1998

Spray Drying Absorber(SDA) system, where the combustion product gas is mixed with atomized limestone-slurry droplets and then the chemical reaction of $SO_2$ with alkaline components of the liquid droplets forms sulfates, has been widely used to eliminate $SO_2$ gas from coal fired power plants and waste incinerators. Liquid atomization is necessary because it can maximize the reaction efficiency by increasing the total surface area and dispersion angle of the alkaline components. First, numerical calculations using FLUENT are carried out to investigate $SO_2$ concentration distribution and thus to calculate $SO_2$ removal efficiency. So to attain the optimized spray conditions, then an electrostatic spraying system is set up and spray visualization is performed to show the effect of an electric field on overall droplet size. Next, the effect of an electric field on the concentrations of $SO_2$ is experimentally examined. Field strength is varied from -10 kV to 10 kV and configurations of conduction charging and induction charging are utilized. Consequently, the electrostatic removal efficiency of 501 increases about 30% with the applied voltage of ${\pm}10kV$ but is independent of polarity of the applied voltage. It Is also found that the conduction charging configuration results in higher efficiency of $SO_2$ removal that the induction charging configuration. Finally, the effect of slurry temperature on $SO_2$ removal is studied. The temperature influences on the electrostatic removal efficiency of $SO_2$.

• The Korean Journal of Rheology
• /
• v.2 no.1
• /
• pp.60-66
• /
• 1990

혼합공정은 화학공학, 식품공학, 건축공학등 여러 가지 산업분야에 걸쳐 이용되는데 최근 고분자 분야에서도 신소재 개발 또는 제품의 물성을 향상시키기 위하여 이에대한 연구 가 활발해지고 있다. 고분자 가공에서 혼합에 이용되는 대표적인 기계로는 twin screw extruder, internal mixer, two roll mill 등이 있는데 본 연구에서는 internal mixer에서의 고 분자 유동 및 혼합거동을 파악하고자 하였다. 실험적으로는 flow visualization 방법을 써서 순환시간을 측정하였고, 시뮬레이션을 통하여 이론적으로 이를 검토하였다. 고분자 거동은 비뉴우톤을 유체로서 설명되기 때문에 본 연구에서는 혼합기의 구조적 특성을 고려한 모델 로서 $\eta$ = $\frac{\eta_o}{1+A[2trd^2]^\frac{1-n}{2}}$

• Communications for Statistical Applications and Methods
• /
• v.15 no.3
• /
• pp.343-351
• /
• 2008

By supervised learning with p predictors, we frequently obtain a prediction function of the form $y\;=\;f(x_1,...,x_p)$. When $p\;{\geq}\;3$, it is not easy to understand the inner structure of f, except for the case the function is formulated as additive. In this study, we propose to use p simple graphs for visual understanding of complex prediction functions produced by several supervised learning engines such as LOESS, neural networks, support vector machines and random forests.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.69-70
• /
• 2019

서비스디자인 분야의 확장에 따라 서비스디자인 대상이 광범위해지면서 상황에 따른 적절한 방법론 선정이 어려워지고 있다. 본 연구에서는 수집된 다양한 데이터를 유형화하는 단계에서 데이터의 특성에 따라 서비스디자이너의 주관이 개입될 확률이 크다는 문제를 해결하기 위해 분석의 정확성을 높이기 위해 벤 다이어그램 활용을 제안하였다. 그 과정에서 기존에 많이 사용되고 있는 $2{\times}2$ 매트릭스 방법론과 벤 다이어그램을 비교하여 $2{\times}2$ 매트릭스의 한계를 지적하고, 보완된 형태의 벤 다이어그램을 3가지로 제안하고 검증하였다.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.174-181
• /
• 2003

In this study the formation of the particle layer near the membrane surface was observed for the crossflow micro filtration module by the high speed video system. The microfiltration membrane of 0.2 {\mu}m$ nominal pore size and the 0.05 wt% solution of the polyacryl-copolymer particle distributed between 100 and 180 {\mu}m$ were used for the experiment. The feed rates were changed to 0.5, 0.75, 1.0, 1.25 and 1.5 cm/sec while the permeate rates were maintained at $20{\pm}3%$ of the feed rates, respectively, It was observed that the particles were accumulated rapidly on the membrane surface as the feed flow rate increased, but the particles were not accumulated at 0.5 cm/sec, Also, it was confirmed that almost all of the particles in the layer already formed during filtration were removed within 30 seconds as the feed flow rate increased to 1.88 cm/sec.