• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.353-357
• /
• 2017

In this study, the inclusion phenomena of tetrahydrofuran + 3-hydroxytetrahydrofuran + $CH_4$ clathrate hydrates were explored via thermodynamic and spectroscopic approaches. The phase equilibria of the double hydrates - THF + $CH_4$ and 3-OH THF + $CH_4$ clathrate hydrates - were determined by pressure-temperature trace during hydrate formation and dissociation, and the result revealed that the equilibrium pressures were shifted to lower pressure region compared to pure $CH_4$ hydrate. The powder X-ray diffraction patterns revealed that the double hydrates of THF + 3-OH THF formed structure II type clathrate hydrates with $CH_4$. The dispersive Raman spectra of the double clathrate hydrates also exhibited that $CH_4$ can be trapped in both $5^{12}6^4$ and $5^{12}$ cages whereas THF and 3-OH THF were encaged in $5^{12}6^4$ cage.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.108-116
• /
• 2004

In this study, the pore-filled ion-exchange membranes were prepared by using the asymmetric PVDF membrane as a nascent membrane. First, the solution of PVBCI having the chlorornethylate aryl ring of 80 percents and DABCO was made with the mixed solvent of THF and DU (8:2). These mixed solution was then, filled in the pores of PVDF membrane, and left for a day to complete the gelation. Finally the pore-filled anion-exchange membrane is obtained fallowed by the amination of the remaining chloromethyl groups with trimethylamine (TMA, 40 wt% in water) forming the positive ammonium ion sites. This 2 step procedure enabled us to produce the pore-filled membranes without change of size, and to control the properties of final membrane with various degree of cross-linking. The results of SEM and AFM showed the polyelectrolyte existed in the pores of nascent membrane as a certain configuration. From the investigation of the solvent affecting much to the permeability and rejection, it was found that the membranes using mixed solvent of THE and DMF (8:2) showed better performances than the membranes produced by THF only. The result of an investigation for the water permeability of the final membrane at low pressure (100 Kpa) showed a typical ultrafiltration membrane's permeability (8 ∼ 10 kg/$m^2$hr) and good values of rejection (55∼60 percent).

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.265-272
• /
• 2023

Lignocellulosic biomass is essential to pretreatment because of having rigid structures and a lot of lignin. Among methods of pretreatment, using THF solvents has the advantage of being easy to reuse. THF (Tetrahydrofuran) used as a co-solvent with water or ionic solvent that is inexpensive and can remove lignin over a wide range of reaction conditions. NaOH (Sodium hydroxide) has been demonstrated to preferentially solvate lignin from cellulose. Thus, NaOH was used as a pretreatment co-solvent for the fractionation of lignin by destroying the ether bond to amend for hydrolysis and expand the surface area of cellulose and hemicellulose. In this experiment, lignin was removed by the NaOH/THF co-solvent pretreatment process to characteristics for the pretreatment and obtain the optimal levulinic acid conversion yield through the acid catalyst conversion process. the NaOH/THF co-solvent system was conducted in various ratios of co-solvent under a total of 16 conditions. And the temperature was 180 ℃ during to 60 mins. The optimum condition of co-solvent is NaOH 5 wt%/THF 90:10(v/v%), 76.8% glucan content was obtained through this co-solvent pretreatment, and 90.1% lignin was removed. In the acid catalyst conversion process, which is a subsequent pretreatment process, the experiment was conducted under the conditions of 30 to 90 min of reaction time and 160 ℃ to 200 ℃ reaction temperature. The optimum condition of acid catalyst conversion process is 60min reaction time under of 180 ℃, and it obtained 84.7% of levulinic aicd conversion yield.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.682-685
• /
• 1991

Solvent dependence of the static solution properties of a polymer chain was studied by static light scattering technique for polystyrene in three good solvents, toluene, tetrahydrofuran and $CCl_4$. The molecular parameters such as radius of gyration and second virial coefficients of polystyrene are found to be clearly larger in THF than the other two solvents and they are in the order of tetrahydrofuran > toluene > $CCl_4$. The radius of gyration shows the same order while the difference is smaller. Nontheless, the penetration functions are found to have a comparable value about 0.2, which confirms the universality of the penetration function in high expansion regime over different nature of solvents.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2623-2628
• /
• 2013

Three di-acyl chlolide reagents, adipoyl chloride, terephthaloyl chloride and isophthaloyl chloride, were used as spacer reagents to prepare bonded type of three cellulose (3,5-dimethylphenyl)carbamate (CDMPC) chiral stationary phases (CSPs). The CDMPC CSPs were prepared using these three acid chlorides as spacer agents at the 6-position of the primary hydroxyl group on the glucose unit of cellulose regioselectively. The chiral recognition ability of the prepared CSPs for five racemates was evaluated by normal-phase high-performance liquid chromatography (HPLC) with the following mobile phases: hexane/isopropanol (IPA), hexane/IPA/tetrahydrofuran (THF) and hexane/IPA/chloroform. The result showed that these prepared CSPs can be used in THF and chloroform solutions and the chiral recognition abilities of the CSPs were improved depending on the eluents and chiral samples.

• International Journal of Safety
• /
• v.9 no.1
• /
• pp.43-46
• /
• 2010

In the recycle process of organic solvent, the atmospheric oxygen can cause autoxidation and product peroxide. The time-saving method to evaluate the hazards has been required. In this study, oxygen pressure monitoring experiment was proposed as a new method to evaluate autoxidative resistances of solvents. Some of organic solvents were pressurized by oxygen and kept under isothermal condition. At the same time, the pressure in the vessel tracked. Iodometrical titration, thermal analysis and spectroscopic analysis were performed to measure peroxide concentration, the heat of reaction and chemical bonding change. From the results that THF has larger oxygen consumption rate than CPME, it is considered that autoxidative resistance of THF is lower than that of CPME. This method enables to obtain results in shorter time than other methods. These experimental results were consistent with the previous research with longer test durations [1-2].

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.157-161
• /
• 2011

For the fabrication of multifunctional biopolymer nanocomposites in the combination of carbon nanotubes (CNTs), recently increasing attention has been paid to an effective homogenization of CNTs within polymer matrices and a fine tuning of the concentration. We developed an efficient method to produce homogeneous CNT-polycaprolactone nanocomposites with various and controllable CNT concentrations using an ionically-modified multi-walled CNT, MWCNT-Cl. The modified MWCNTs could be homogeneously dispersed in tetrahydrofuran (THF). Polycaprolactone (PCL) as a biodegradable and biocompatible polymer was smoothly dissolved in the homogeneous MWCNT-Cl/THF solution without agglomeration of MWCNT-Cl. The physicochemical and mechanical properties of the resultant nanocomposites were examined and the biological usefulness was briefly assessed.

• YAKHAK HOEJI
• /
• v.43 no.5
• /
• pp.584-590
• /
• 1999

Bioactivity-directed fractionation from the seeds of Annona cherimolia resulted in the isolation of two known cytotoxic compounds : corrosolin (1) and compound-2 (2). The structures of these compounds were characterized on the basis of chemical and spectral data. Corrosolin has a relative stereochemical relationship of threo/trans/threo for the mono-tetrahydrofuran (THF) ring with two flanking hydroxyls, from C-15 to C-20, which is the annonacin type. Compound-2 has a relative stereochemical relationship of threo/trans/threo/trans/threo for the adjacent bis-THF ring with two flanking hydroxyls, such as in the asimicin type. The absolute configurations of carbinol carbons in corrosolin in corrosolin were determined as 10R, 15R, and 20R by analysis of its Mosher ester derivatives. Corrosolin and compound-2 are known, but are first isolated in this plant.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.66-69
• /
• 1986

The reaction of potassium trialkoxyborohydrides of varying steric requirements with lithium chloride in tetrahydrofuran(THF) was examined in detail to establish the generality of this synthesis of the corresponding lithium trialkoxyborohydrides. The metal ion exchange reaction between potassium triisopropoxyborohydride and lithium chloride in THF proceeded instantly at room temperature and the corresponding lithium salt was very stable toward disproportionation. However, for R = s-Bu, t-Bu and 2-methylcyclohexyl, with increasing steric requirement, the lithium derivatives were unstable and thus dissociated into $(RO)BH_3^-\;and\; (RO)_4B^-$. The stereoselectivity of lithium triisopropoxyborohydride(LIPBH) in the reduction of representative cyclic ketones was examined and compared with that of the potassium derivative.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.243-249
• /
• 1998

The reaction of alcohol with a solution of thexylborane (ThxBH2) in tetrahydrofuran (THF) provides a new class of mild and selective reducing agents, thexylalkoxyboranes (ThxBHOR: R=Et, i-Pr, i-Bu, s-Bu, t-Bu, Ph). In order to elucidate the effect of the alkoxy group in reduction reactions, the reducing power of ThxBHOR toward selected organic compounds containing representative functional groups under practical conditions (THF, 25°, the quantitative amount of reagent to compound) has been investigated. Generally, the reactivity of ThxBHOR is largely dependent upon the alkoxy substituent. ThxBHOR can be synthesized from a variety of alcohols, thus allowing control of the steric and electronic environment of these reagents.