• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.115-118
• /
• 2004

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.632-637
• /
• 2010

Liquid-liquid equilibrium data for the quaternary system water +tetrahydrofuran + butyl acetate + isoamyl alcohol mixture were measured at 298.15 K and atmospheric pressure. Binodal curves, tie-lines, distribution, and selectivity for the quaternary system have been determined in order to investigate the effect of using binary solvents, butyl acetate and isoamyl alcohol, on extracting tetrahydrofuran from aqueous solution. In addition, these experimental tie-line data were also compared with the values predicted by the UNIFAC model. For the quaternary system, an average root-mean-square deviation for the system in 75/25, 50/50, and 25/75 mass ratios as mixed solvents are(3.35, 5.21 and 5.65) %, respectively.

• Proceedings of the Korean Fiber Society Conference
• /
• 2000.04a
• /
• pp.17-20
• /
• 2000

• Journal of Pharmaceutical Investigation
• /
• v.40 no.3
• /
• pp.193-200
• /
• 2010

The objective of this study was to investigate the effects of sample preparation, HPLC conditions and peak measurement methods upon determining progesterone content of poly-d,l-lactide-co-glycolide microspheres. A series of the microspheres with different formulations was first prepared. To determine their actual drug contents, the microspheres were dissolved in tetrahydrofuran and diluted with various amounts of methanol to precipitate the polymer. After removal of polymeric precipitates, the filtrates were subject to HPLC analysis under versatile experimental conditions. Interestingly, the composition of a sample solution (e.g., the ratio of methanol to tetrahydrofuran) affected the magnitudes of both peak fronting and peak broadening of progesterone. Its peak became broader and more asymmetrical at lower methanol:tetrahydrofuran ratios. Furthermore, its peak height was influenced by the proportion of tetrahydrofuran in a sample solution. Such problems encountered with tetrahydrofuran were exacerbated when a larger volume of the sample solution was injected onto an analytical column. Under our experimental conditions a peak area measurement provided more accurate and reliable determination of progesterone content in various microspheres than a peak height determination. Optimizing the composition of a sample solution, HPLC chromatographic conditions and peak analysis methods was a prerequisite to an accurate determination of progesterone encapsulated within microspheres.

• Reproductive and Developmental Biology
• /
• v.33 no.1
• /
• pp.1-5
• /
• 2009

To search a new pig pheromonal odorant, the $N^1$-allyl-$N^2$-(tetrahydrofuran-Z-ylmethyl)oxalamide molecule predicted by ligand based approach and molecular docking method was synthesized by nucleophilic addition-elimination reaction ($Ad_{NU-E}$) between N-allyloxalamic acid ethylester and tetrahydrofurlmethylamine. According to the evaluation results for efficiency of pig estrus control, the synthesized pig pheromonal $N^1$-allyl-$N^2$-(tetrahydrofuran-2-ylmethyl)oxalamide molecule advanced the estrus by 11.3 days (p<0.05) compared with the non-pheromone group. And from these results, it is predicted that the synthesized pig pheromonal compound will be able to increase the reproduction efficiency of pig.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1484-1487
• /
• 1999

Extraction is the most important and tedious step to determine water-soluble vitamin C in water-insoluble chewing gum. For the rapid determination of vitamin C in chewing gum, a new method of dispersion in tetrahydrofuran(THF) was performed. Vitamin C was easily extracted from gum base using THF The content of vitamin C in chewing gum was rapidly quantified with high reliability by an enzymatic method using a chewing gum sample dispersed in tetrahydrofuran.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.296-298
• /
• 1986

Carboxylic acid anhydrides are rapidly reduced with borane-lithium chloride (1:0.1) system to give corresponding alcohols (diols in the case of cyclic anhydride) quantitatively in tetrahydrofuran at room temperature. This reagent tolerates aromatic acid ester, nitro, and halide functional groups, however competitively reduces aliphatic ester and nitrile groups.

• Reproductive and Developmental Biology
• /
• v.32 no.3
• /
• pp.141-146
• /
• 2008

To search a new porcine pheromonal odorant, the models of four type (2D-QSAR, HQSAR, CoMFA & CoMSlA) were derived from quantitative structure-activity relationship (QSAR) between tetrahydrofuran-2-yl family compounds and their observed binding affinity constants (Obs.p$[Od]_{50}$). The optimized CoMFA model (predictability; $r^{2}_{cv.}(q^2)$=0.886 & correlation coefficient: $r^{2}_{ncv.}$=0.984) from ligand based approaches was confirmed as the best model among them. The $N^{1}$-allyl-$N^{2}$-(tetrahydrofuran-2-yl)methyl)oxalamide (P1), 2-(4-trimethylammoniummethylcyclohexyloxy)tetrahydrofurane (P5) and 2-(3-trimethylammoniummethylcyclohexyloxy)tetrahydrofurane (P6) molecules predicted as porcine pheromonal odorant by the CoMFA model were showed relatively high binding affinity constant values (Pred.p$[Od]_{50}=8{\sim}10$) and very lower toxicity values against some sorts of toxicity.

• Elastomers and Composites
• /
• v.32 no.5
• /
• pp.302-308
• /
• 1997

Over 1953/54 Karl Ziegler and Giulio Natta independently discovered new types of catalyst. Thus it was able to produce synthetic cis-polyisoprene rubber which has same properties like natural rubber, since then the amount of consumption was increased rapidly. The problem of disposing of used rubbers has become acute in recent years. cis-Polyisoprene was degraded in supercritical tetrahydrofuran and degree of degradation and product were observed by GPC, FT-IR, GC-MS analyses. As a result, degradation of cis-polyisoprene had small dependency upon the operating pressure, and was inhibited in concentration increase. And cis-polyisoprene was degraded into narrow molecular weight distribution oligomer in 3 hours, and more than 10 organic compounds were produced.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2011-2016
• /
• 2009

To resolve the differentiation problem of acetone and acrolein in the analysis of carbonyls by high-performance liquid chromatography (HPLC), we investigated the optimum analytical conditions for their separation. Carbonyl compounds were collected by 2,4-dinitrophenylhydrazine (DNPH)-coated cartridges. We examined the influence of three experimental variables: temperature (25, 30, 40, 50 and 60 ${^{\circ}C}$), flow rate (1.0 and 1.2 mL/min), and relative mobile phase composition (among acetonitrile, water and tetrahydrofuran). The experimental results revealed the optimum analytical condition of a flow rate of 1.2 mL/min, temperature of 32 ${^{\circ}C}$ and mobile phase composition of acetonitrile: water: tetrahydrofuran = 34 : 52.8 : 13.2. The analysis of indoor air composition indicated that acrolein and acetone comprised 11% and 42% of all aldehydes, respectively.