• 한국통신학회논문지
• /
• 제39C권9호
• /
• pp.880-886
• /
• 2014

열차제어시스템은 최근의 컴퓨터 기술의 발달에 따른 자동화 및 지능화에 따라 소프트웨어에의 의존성이 더욱 증가하고 있으며, 동시에 소프트웨어의 오류 내재 가능성이 높아지고 실제 장애발생으로 인한 위험비용도 증가하고 있다. 이에 따라 열차제어시스템 소프트웨어의 무결성 검증이 매우 중요한 이슈가 되고 있으며, 이 중에서 열차제어 소프트웨어 기능안전성 검증을 위한 블랙박스 테스팅 도구의 필요성이 제기되고 있으나, 기존 상용도구들은 사용하기 어렵고 복잡하여 실제 현장에서 적용이 거의 되지 않고 있다. 본 논문에서는 이러한 분석을 바탕으로 열차제어시스템 소프트웨어 기능안전성 검증을 위한 실제 사용하고 있은 인터페이스를 통한 새로운 개념의 블랙박스 테스팅 도구를 제안하였다. 현재 제안한 도구의 설계 및 프로토타입이 개발되어 열차제어시스템 소프트웨어 테스팅에 시범적용 중에 있다.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.625-633
• /
• 2005

Vehicle drift was reduced using statistical six sigma tools. The study was performed through four steps: M (measure), A (analyze), I (improve), and C (control). Step M measured the main factors which were derived from a fishbone diagram. The measurement system capabilities were analyzed and improved before measurement. Step A analyzed critical problems by examining the process capability and control chart derived from the measured values. Step I analyzed the influence of the main factors on vehicle drift using DOE (design of experiment) to derive the CTQ (critical to quality). The tire conicity and toe angle difference proved to be CTQ. This information enabled the manufacturing process related with the CTQ to be improved. The respective toe angle tolerance for the adjustment process was obtained using the Monte Carlo simulation. Step C verified and controlled the improved results through hypothesis testing and Monte Carlo simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.90-93
• /
• 2002

In view of reliability assessment, the failure mode analysis by performance tests for machine totals is researched in this study. First, the error analysis with circular movement test data is studied. The various errors and their origins are analyzed by error equations and related parts are investigated. Second, This paper deals with analysis of vibration testing fur machine tools spindle. The various frequency components are classified by FFT and order analysis. The simple measuring devices and error evaluation programs for tests are also developed.

• International Journal of Safety
• /
• 제7권1호
• /
• pp.10-14
• /
• 2008

For evaluating the radiation degradation of cross-linked polyethylene (XLPE) cable insulation due to the irradiated oxidation, XLPE was irradiated with ${\gamma}$-ray. For each irradiated samples, TGA, DSC, FT-IR, and tensile tests were carried out. Regarding radiation degradation, oxidative process was predominant. TGA, DSC and FT-IR can be useful tools for evaluating the radiation degradation due to the irradiated oxidation because these analyses need only small amount of samples. The results of TGA, DSC and FTIR analyses showed the similar tendency for irradiated degradation. They can be useful tools for evaluating the oxidation of insulating material by non-destructive testing.

• 산업공학
• /
• 제7권3호
• /
• pp.77-90
• /
• 1994

Recently, it has been widely conceived that Concurrent Enginering (CE) can provide a competitive edge for companies that have confronted with rapidly changing market requirements, such as shortening of product life-cycles, high quality and low cost products, diversity of customer demand, and so on. CE is generally recognized as a practice to bridge the gap between designing a product and other various life-cycle activities, such as manufacturing, assembly, testing, and maintenance, at an early stage of design. In this paper the concepts of CE is first overviewed, and many of its supporting tools are discussed. It is then proposed an architecture of a CE support system that can provide a unifying view of the tools. Finally, a case that has successfully implemented the concepts is presented.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.75-78
• /
• 2005

Although many tests for stabilization of the software have been done, vulnerability test for a system run by combination of the software of various products has not been conducted enough. This has led to increased threats and vulnerability of system. Especially, web-based software system, which is public, has inherent possibility of exposure to attacks and is likely to be seriously damaged by an accident. Consequently, comprehensive and systematic test plans and techniques are required. Moreover, it is necessary to establish a procedure for managing and handling the results of vulnerability test. This paper proposes vulnerability test plans and designs for implementing automated tools, both of which can be complied with on web-based software systems.

• Journal of Microbiology and Biotechnology
• /
• 제32권1호
• /
• pp.1-5
• /
• 2022

Diagnostics, vaccines, and drugs are indispensable tools and control measures employed to overcome infectious diseases such as coronavirus disease 2019 (COVID-19). Diagnostic tools based on RT-PCR were developed early in the COVID-19 pandemic and were urgently required for quarantine (testing, tracing and isolation). Vaccines such as mRNA vaccines and virus-vectored vaccines were also successfully developed using new platform technologies within one year after identifying severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) as the causative agent of COVID-19. Drug development has been conducted in various ways including drug repurposing, convalescent plasma therapy, and monoclonal antibody development. Among the above efforts, this review examines COVID-19 drug development along with the related and upcoming challenges.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.924-928
• /
• 2005

Formative assessment of student progress and attitudes is important to our continuous improvement process, but collecting and compiling the data is burdensome without access to computer tools. This research is to set up a mobile computer based lab that will enable faculty who teach in rooms without computers to use testing and survey tools. The technologies necessary to develop such system including wireless communication, World Wide Web (WWW), database, and mobile computing are investigated in this research. The real-time based formative assessment of student is proposed. A hardware configuration for real-time assessment is also presented in the research.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.52-55
• /
• 2011

Embedded system developers use design and testing tools to make their product faster. Previously developed a virtual development environment for embedded software (VDEES) using open source software, mainly the SID simulation framework for a simulator engine and the Eclipse platform for a development platform. VDEES enables developers to develop SID Component in C++. A bridge module for developing SID Component in Java has been developed and available. However, using this module, developers have to build their SID Java component from scratch. In this work, we developed SID Java Component Builder Plug-in as an additional features to VDEES. This tools enables developers to build SID Component in Java faster and easier.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권10호
• /
• pp.760-767
• /
• 2010

메모리 누수 검출을 위한 많은 도구들이 존재한다. 하자만 큰 시간적, 공간적 오버헤드로 인해 규모가 큰 제품의 개발자들은 사용을 꺼리게 된다. 이에 우리는 개발자들이 자신이 개발한 모듈만을 대상으로 유닛 테스트 시에 메모리 누수를 검출할 수 있는 기법을 고안하였다. 우리는 고정 크기 순환적 메모리 할당 기법을 우리의 목적에 맞게 확장함으로써 이것을 달성하였으며 우리의 기법을 평가하기 위해서, 간단한 데이터베이스 관리 시스템을 구현하여 그 중 일부 모듈을 대상으로 테스트 하였다. 실험 결과 우리 기법은 유닛 테스트 시에 적은 시간적, 공간적 오버헤드와 거짓 검출을 가졌다.