• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.44-50
• /
• 2010

Durability performance evaluation technology using Virtual Testing Method is a new concept of a vehicle design, which can reduce the automotive components design period and cost. In this paper, the fatigue life of an aluminum knuckle of a passenger car is evaluated using virtual testing method. The flexible multibody dynamic model of a front half car module is generated and solved with service loads which are measured from Belgian roads. Using a multibody dynamic analysis software, the flexible multibody dynamic simulation of a half car model is carried out and the dynamic stress profile of an aluminum knuckle is acquired. The stress profile is exported to a fatigue analysis software and durability performance of an aluminum knuckle is evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.466-467
• /
• 2006

Several synthetic testing methods have widely been used for the performance evaluation of ultra high-voltage circuit breaker. Among these synthetic method, in the paper, capacitance switching testing method which can meet the test requirements and increase the testing capacity has been proposed. This method is made up of two separated sources of short-circuit generator for current source and L-C resonance circuit for voltage source. By using this method, KERI will perform the performance evaluation of capacitive current switching performance for the 800kV GCB(Gas Circuit Breaker).

• 정보학연구
• /
• 제10권4호
• /
• pp.85-93
• /
• 2007

RFID applied in many area. I think that RFID enlarge for our life more and more. The application technology of RFID change the Mobile RFID using mobile phone and PDF etc. I think, Mobile RFID enlarge application technology gradually. In this paper, we propose the quality measurement metrics for mobile RFID middleware. I propose the quality testing model for interoperability and security of mobile RFID middleware. We examine the international standard for mobile RFID and software testing. In this paper, I proposed the evaluation model of mobile RFID middleware on the basis of international standard ISO/IEC 9126-2 and ISO/IEC 25000 series.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.403-410
• /
• 2006

Eddy current testing (ECT) signals produced by a differential bobbin coil probe vary according to probe design parameters such as the number of turns, geometry and coil gap size. In the present study, the characteristics of a differential bobbin coil probe signals are investigated by numerical simulation in order to determine the optimum coil gap. For verification of numerical simulation accuracy, a specially designed bobbin probe of which the coil gap can be adjusted is fabricated and a series of experiments to acquire signals from two kinds of standard tubes with the variation in coil gap is performed. Then, the experimental signals are compared to the simulation results. Based on this investigation, a decision on the optimum range of coil gap is made. The theoretically predicted signals agree very well to the experimental signals. In fact, this excellent agreement demonstrates a high potential of the simulation as a design optimization tool for ECT bobbin probes.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1031-1038
• /
• 2001

In order to verify the analytical methods predicting failure behavior of cracked piping, full-scale pipe tests are crucial in nuclear power plant piping. For this reason, series of international test programs have been conducted. However, full-scale pipe tests require expensive testing equipment and long period of testing time. The objective of this paper is to develop a test system which can economically simulate the full-scale pipe test regarding the integrity evaluation. This system provides the failure behavior of cracked pipe by testing a wide-plate specimen. The system provides the failure behavior of cracked pipe by testing a wide-plate specimen. The system was developed for the integrity evaluation of nuclear piping based on the methodology of hardware-in-the-loop (HiL) simulation. Using this simulator, the piping integrity can be evaluated based on the elastic-plastic behavior of full-scale pipe, and the high cost full-scale pipe test may be replaced with this economical system.

• 인터넷정보학회논문지
• /
• 제7권2호
• /
• pp.151-160
• /
• 2006

소프트웨어 품질 평가 시스템과 소프트웨어 품질 평가 범위는 소프트웨어 신뢰도 측정을 위해서 정의되어져야 한다. 본 연구에서 소프트웨어 신뢰도 품질 평가 메트릭을 개발하고 소프트웨어 신뢰도를 측정하기 위한 적당한 범주의 테스팅에 대해서 조사한다. 연구를 성공적으로 수행하기 위해서 소프트웨어의 버그수를 이용해서 소프트웨어의 실패시간을 예측했다. 소프트웨어의 신뢰도는 소프트웨어의 품질 평가에 있어서 중요하다. 국제 표준 ISO/IEC 9126의 소프트웨어 신뢰성 평가 메트릭을 기초로 하여 소프트웨어 신뢰도를 평가할 수 있는 메트릭을 제안하고 이것을 중심으로 하여 평가방안을 제안한다.

• Elastomers and Composites
• /
• 제56권3호
• /
• pp.124-135
• /
• 2021

Evaluating service lives of rubber materials at certain temperatures requires a destructive method (typically using elongation at break). In this study, a non-destructive method based on hardness change rate was proposed for evaluating the service life of chloroprene rubber (CR). Compared to the destructive method, this non-destructive method ensures homogeneity of CR specimens and requires a small number of samples. Thermal accelerated degradation test was conducted on the CR specimens at 55, 70, 85, 100, and 125℃, and the tensile strength, elongation at break, and hardness were measured. The results of the experiment were compared to those of the accelerated life evaluation method proposed in this study. Comparing the analyzed lives in the high temperature region (70, 85, 100, and 125℃), the difference between the service lives for the destructive method (using the elongation at break) and non-destructive method (using the hardness) was approximately 0.1 year. Therefore, it was confirmed that the proposed non-destructive evaluation method based on hardness changes can evaluate the actual life of CR under thermally accelerated degradation conditions.

• 비파괴검사학회지
• /
• 제18권5호
• /
• pp.398-412
• /
• 1998

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.197-210
• /
• 2004

• 비파괴검사학회지
• /
• 제15권3호
• /
• pp.467-481
• /
• 1995