• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.539-543
• /
• 2010

We present a random bit generator that uses fingerprint image for the source of random, and random bit generator using fingerprint image for the randomness has not been presented as yet. Fingerprint image is affected by the operational environments including sensing act, nonuniform contact and inconsistent contact, and these operational environments make FPI to be used for the source of random possible. Our generator produces, on the average, 9,334 bits a fingerprint image in 0.03 second. We have used the NIST SDB14 test suite consisting of sixteen statistical tests for testing the randomness of the bit sequence generated by our generator, and as the result, the bit sequence passes all sixteen statistical tests.

• The Journal of the Acoustical Society of Korea
• /
• 제16권3E호
• /
• pp.14-18
• /
• 1997

One fo the major problems in speech recognition is the mismatch between training and testing environments. Recently, SNR normalization technique, which normalizes the dynamic range of frequency channels in mel-scaled filterbank, was proposed[1]. While it showed improved robustness against additive noise, it requires a reliable speech detection mechanism and several adaptation parameters to be optimized. In this paper, we propose a modified SNR normalization technique. In this technique, we take simply the maximum of filterbank output and predetermined masking constant for each frequency band. According to the speaker-independent isolated word recognition in car noise environments, proposed modification yields better recognition performance that the original SNR normalization method, with rather reduced complexity.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.206-213
• /
• 2003

Laboratory testing of representative rock specimens is of fundamental necessity for the successful design and/or assessment of facilities associated with many kinds of underground exploitation, including the geological disposal of radioactive nuclear waste. As a fundamental and systematic study, a series of measurements of the physical, mechanical and hydraulic properties of Inada granite and Shirahama sandstone, two rock types that are widely available in Japan, have been performed. This paper presents the results of a study of the effective porosity, density, compressive and shear wave velocity, unconfined compressive strength and permeability of the two rocks. The anisotropy and the effects of confining pressure on the permeability of the rocks, as well as the relationships among the physical, mechanical and hydraulic properties, are also investigated and discussed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.59-66
• /
• 1998

This paper presents friction and wear related results of thermite and gas pressure welded rails under various environmental contact conditions. A welded rail which is fabricated by thermite welding and gas pressure one has been tested over full range of test conditions in a pin-on-disk wear testing machine. The results show that the friction coefficient and wear rates of a welded rail are heavily dependent on the contact pressures and sliding environments for two welding methods such as thermite and gas pressure weldings.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.187-198
• /
• 2011

User authentication refers to user identification based on something a user knows, something a user has, something a user is or something the user does; it can also take place based on a combination of two or more of such factors. With the increasingly diverse risks in online environments, user authentication methods are also becoming more diversified. This research analyzes user authentication methods being used in various online environments, such as web portals, electronic transactions, financial services and e-government, to identify the characteristics and issues of such authentication methods in order to present a user authentication level system model suitable for different online services. The results of our method are confirmed through a risk assessment and we verify its safety using the testing method presented in OWASP and NIST SP800-63.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1138-1143
• /
• 2011

One of the critical items in radar testing is the ability to evaluate the performance of radar systems under real operational environments. But it takes lots of time and cost to operate real targets and analyze the test results due to a large amount of data based on these complicated environments. In this paper, the Radar Simulative T&E Lab. is introduced, and the test and analysis results of the developing radar for predicting the radar system performance are described in the Radar Simulative T&E Lab. This laboratory could be used to test the far-field characteristics of antenna radiation pattern and to perform an effective radar system test and evaluation using a simulative target generator under a low cost repeating test situation.

• 대한음성학회지:말소리
• /
• 제58호
• /
• pp.35-44
• /
• 2006

Maximum likelihood linear regression (MLLR) adaptation experiences severe performance degradation with very tiny amount of adaptation data. Eigenspace- based MLLR, as an alternative to MLLR for fast speaker adaptation, also has a weak point that it cannot deal with the mismatch between training and testing environments. In this paper, we propose a simultaneous fast speaker and environment adaptation based on eigenspace-based MLLR. We also extend the sub-stream based eigenspace-based MLLR to generalize the eigenspace-based MLLR with bias compensation. A vocabulary-independent word recognition experiment shows the proposed algorithm is superior to eigenspace-based MLLR regardless of the amount of adaptation data in diverse noisy environments. Especially, proposed sub-stream eigenspace-based MLLR with bias compensation yields 67% relative improvement with 10 adaptation words in 10 dB SNR environment, in comparison with the conventional eigenspace-based MLLR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권6호
• /
• pp.2583-2605
• /
• 2016

Fingerprint positioning is a main stream and key technique for seamless positioning systems. In this paper, we develop a performance evaluation testbed for fingerprint based Wireless Local Area Network (WLAN) positioning system. The testbed consists of positioning server, positioning terminal, Access Point (AP) units, positioning accuracy analysis system and testing scenarios. Different from other testbeds tended to focus on testing in same situation, in the proposed testbed, a couple of scenarios are set to test the positioning system including indoor and outdoor environments. Handset-side positioning mode and network-side positioning mode are provided simultaneously. Variety of motion models, such as static model, low-speed model and high-speed model are considered as well as different positioning algorithms. Finally, some implementation cases are analyzed to verify the credibility of the testbed.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 춘계학술발표대회
• /
• pp.219-222
• /
• 2006

임베디드 소프트웨어는 IT기술의 발달과 하드웨어의 다양한 보급 등으로 인해 널리 사용되기 시작했으며, 일반적인 소프트웨어와는 다른 방식으로 제작되며, 절대 표준이 없기 때문에 다양한 방식으로 개발되고 있다. 임베디드 소프트웨어 품질 및 생산성을 위해서는 체계적인 테스팅 방법론이 요구된다. 기존의 테스팅 방법으로는 복잡하고 높은 수준의 임베디드 소프트웨어 기능들을 테스트하는데 한계점이 많다. 본 논문에서는 기존 소프트웨어 테스팅과 임베디드 소프트웨어 테스팅의 차이점을 제시하고 효율적인 임베디드 소프트웨어 테스팅이 가능한 지원도구의 요구사항과 전형적인 방법을 탈피하여 자동화된 테스팅 방법 및 도구인 ESTE(Embedded Software Testing Environments)의 구조와 지원 기능을 제시하고자 한다.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.373-379
• /
• 2006

Vibration-based structural health monitoring is one of non-destructive evaluation (NDE) techniques for civil infrastructures. This paper presents a novel fiber optic accelerometer system to monitor civil engineering structures and a successful application of the novel sensor system for measuring ambient vibration of a real building structure. This sensor system integrates the Moire fringe phenomenon with fiber optics to achieve accurate and reliable measurements. The sensor system is immune to electromagnetic (EM) interference making it suitable for difficult applications in such environments involving strong EM fields, electrical spark-induced explosion risks, and cabling problems, prohibiting the use of conventional electromagnetic accelerometers. A prototype sensor system has been developed, together with a signal processing software. The experimental studies demonstrated the high-performance of the fiber optic sensor system. Especially, the sensor was successfully used for monitoring a real building on UCI (University of California Irvine, USA).