• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.

• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.109-116
• /
• 1976

Reorganization of myun health care service is one of the main issues in health care delivery in rural Korea. The fundamenta, concept of the role and function of the myun health subcenter is that it is the basic unit of rural health care service and is to provide comprehensive health care service through the integration of curative and preventive services. The aim of this study is to analyze the patterns of curative activities in the myun health subcenter in terms of the most prevalent types of diseases, necessary diagnostic methods and required equipment, types of treatment, necessary drugs and materials, and finally the cost of curative services. The population on which this study was done was the 1596 patients who visited the two myun health subcenters (Sunwon Myun and Naega Myun) in Kang Wha County, the area of the Yonsei University Community Health Teaching Project, during period from May 1, 1975 to June 10, 1976. For the patient's record in the clinic, problem oriented medical records were used. Decisions regarding the disease classification, the diagnostic methods used and selection of the most appropriate and adequate medical treatment were made by a group of three experienced physicians after reviewing the medical records which had been written by public physicians who were treating patients in the study area. The records were reviewed by resident staff members of the Department of Preventive Medicine, of Yonsei University College of Medicine. A brief summary of results of the study is as follow: 1. 29.9% of the patients who visited the clinics were ages between 0-4. No sex difference was observed among patients less than 20 years of age. However, among patients over 20 years old, females predominated. Thus it is evident that the majority of patients were either children or mothers and grandmothers. 2. The distance from the individual villages to the myun health subcenter was one of important factors in determining the ratio of clinic visits. However, other factors such as the activities of the health workers also affected the rates substantially. 3. The most common 25 diseases comprised 90.2% of all the diseases recorded. Acute respiratory infection (25.5%), Skin (12.7%) , diarrheal diseases (6.8%), neuralgia and back pain (4.9%) and. all other injuries (3.9%) were the five most common diseases. 4. Of all the diseases diagnosed and treated, 9.2% required simple laboratory tests for diagnosis, 6.5% required X-ray examination, and altogether 13.6% required either laboratory test or X-ray examination. 5. Treatment and management of 42.0% of the cases could be accomplished with simple, inexpensive drugs, 12.8% required the use of more expensive drugs (mostly antibiotics) and injections were required in 19.7% of the cases. Minor surgery and referral were necessary in 5% of the cases. 6. The cost for diagnosis and treatment was estimated with a standard which was set by general concensus. The average cost of diagnosis was 144 per case and the cost of treatment was 726 per case, The Total average cost per visit was 870.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.391-400
• /
• 2016

In this work, novel thin film composite (TFC) forward osmosis (FO) membranes are developed via interfacial polymerization on the polysulfone (PS) substrate, using TEOS as the a sol-gel reagent to form hydrophilic interlayer polymer between PS and polyamide (PA). The PS substrate was cast on a very thin polyester nonwoven to reduce membrane resistance. With the incorporation of TEOS (tetraethoxy silane) polymer in the interface between PS and PA, the formed TFC FO membrane exhibits better hydrophilicity and improved water flux, and therefore superior membrane performance. By changing the polymerization sequence of PA interfacial polymerization and TEOS sol-gel condensation, the surface properties and performance of FO membranes are changed significantly. The permeability of FO membranes were estimated using the bench-scale FO test equipment. The distribution of the polysiloxane on composite membrane and morphology are also studied with FE-SEM and EDAX. The PS_PA_TEOS membrane showed highly enhanced water flux (79.2 LMH) but reverse salt flux (RSF) value (7.10 GMH) also increased. However, the flux of PS_TEOS_PA membrane increased moderately (54.1 LMH) without increasing RSF value (1.60 GMH) compare with PS_PA membrane.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.90-94
• /
• 2007

Location tracking automation of resources in construction industry is one of the most important procedures to improve construction project performance and reduce the period of construction. Recently, location tracking technologies have proven to be effective in tracking construction materials and equipment in real time through the instrumentality of RFID (Radio Frequency Identification). By using wireless communication and inter-working system between RFID and USN, it is possible that construction engineers receive the location information of construction resources without additional efforts that move the RFID reader to read tags periodically. In the inter-working system, RFID reader delivers the acquired materials information to sensor node which is connected by serial interface. Then sensor node transmits the received data to the data aggregation terminal that is a sink node. The data aggregation terminal can transmit collected data to construction manager who is out of construction site using infrastructure such as CDMA(Code Division Multiple Access) network. The combination model of the two system and field test scenarios are presented in this paper.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.743-752
• /
• 2013

The objective of this study was to investigate the quality characteristics of spirits derived from fruit using copper distillation equipment. First, optimal yeast strains were chosen through a fermentation test on raw materials (apples, mandarins and rowanberries). The normal fermentation condition for rowanberries observed at a rowanberry concentration of 8% during mashing included chaptalization with sugar to increase the alcohol content. During the mashing, fruits were fermented and distilled through one of three different types of distillation apparatuses (pot distiller, vacuum distiller, or multistage distiller made of copper). The results revealed that the type of apparatus used affects the content of alcohol and flavor components. The distilled spirits prepared through a copper multistage distiller had a much higher tendency to retain components of fruit aromas such as ethyl acetate and provided higher yields than spirits prepared with a pot distiller or vacuum distiller. Thus, the copper multistage distiller apparatus can be applied to positively influence the taste and flavor of fruit distilled spirits by enhancing fruit aromas, removing impurities such as sulfur components and enhancing yields.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.219-225
• /
• 2020

With the aging population, the prevalence of musculoskeletal disorders in the elderly continues to increase. In addition, musculoskeletal disorders are the third most common social and economic loss among occupational illnesses in Workers' compensation insurance benefits as of 2015 standard and are also common among workers. In this study, a vest that can assist in the prevention and treatment of musculoskeletal disorders of the waist was produced, and it is intended to confirm the presence or absence of the effect through experiments. Diseases of the waist are closely related to core muscles. Therefore, the produced vest was made in a form that supports the core muscles. Before and after wearing the vest for effectiveness verification, the While performing 10-times of the Mackenzie exercises, a waist extension exercise, collected the EMG data of the internal oblique, Rectus abdominis, and Erector spinae, which correspond to the core muscles. The collected data were analyzed through the electromyography analysis program RM-3 to obtain RMS values for 10-times measurements of each muscle and to compare the average values. After comparing the data, to verify the significance, the technical statistical value of the measurement result was calculated and the average difference was verified through PASW ver18.0, And the paired t-test is performed on the experimental results to perform statistical processing. and Statistical processing was performed by setting the significance level to α=.05.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.395-402
• /
• 2005

The most important point when we engage on waterway dredging work is supplying safe navigational passage to the vessels underway by narrowing dredge work area and removing submerged dangers. In order to meet this end it is necessary to use auxiliary equipment for shifting actively and mooring and adopt automation of dredging work by integrating information on real time position, dredging depth, and work information. The dredger with a spud control system in this study, by the way, is able to employed on continuous dredging work with the narrowest working area allowing wide and safe passages to vessels underway, by moving the dredger to the working zone with the spud controlled automatically. Furthermore, it has been improved definitely compared with the existing dredging process management system such that it shows the track of spud and working depth on the electronic navigation chart of window, together with the final outcome of dredging work. The test dredging work at the entrance of Busan North Port for system evaluation showed that actual working time available was twice of the one by the existing anchor system, and that it reduced $38\%$ of time for preparation work and one man power.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.3
• /
• pp.49-56
• /
• 2012

Background : The purpose of this study is to understand the effects of ankle joint taping on balancing abilities of the elderly and to provide preliminary data on preventing falls among the elderly. Methods : In this study, 20 students(8 male, 12 female) in their 20s from D University as well as 14 elderly(4 male, 10 female) in their 70s from S community center have participated. The participants were well informed about the experiment and voluntarily participated. We measured the difference in balancing ability before and after taping between the two groups using methods such as standing on single-leg stance, TUG, and plantar pressure. Kinesio taping, a stop-watch, and the EMED-system were used as equipment along with the SPSS 12.0 program, with a significance level of 0.05, to test the difference before and after taping between the two groups. Result : First, the 70s group showed a significant increase in the dorsal flexion angle after taping. Second, the 70s group showed a significant increase in duration time of standing on one foot after taping. Third, the 70s group's TUG time was significantly shorter. Fourth, the maximum peak value for static and dynamic plantar pressure showed a significant decrease after taping; and dynamic plantar pressure area value decreased as well within significant range. Conclusion : The study has shown that taping is effective on static dynamic balancing ability of the elderly.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.3-8
• /
• 2009

The traction system has been mainly used for rehabilitation and correction of patients with spine or gait diseases in orthopedics or at home. Some problems could occur in human body when patients forced their training using the traction system. So it needs to measure a traction force and control the training time. However, most of products on market have no sensor measuring traction force. Thus we designed and made a sensor detecting traction force using strain gauge, amplifier for transition to output signal and experiment devices for performance test. We carried out experiment of a sensor detecting a traction force and measured electric responses of it with respect to traction loads. Maximum error was within about 1% for experiments in static condition and the average error was about 0.7% for experiments in dynamic condition. We concluded that it is possible to use the developed sensor for measurement of traction force since the maximum output variation of a sensor detecting a traction force was about 0.3% in $0^{\circ}C-60^{\circ}C$ temperature condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.709-716
• /
• 2016

Recently, the operating conditions of the various mechanical structures have become more severe and the running time has become longer as the development of plant equipment increases with the introduction of high technology. Thus, the reliability of the system and its accessories is becoming a problem. Normally, synthetic natural gas (SNG) plants use 1.25Cr-0.5Mo or 2.25Cr-1Mo heat resistant steel according to the operating conditions. In this study, a lab-scale reactor was set up using 1.25Cr-0.5Mo steel, in order to carry out corrosion tests for producing synthetic natural gas. The corrosive characteristics were investigated under 1st-methanator operating conditions and fundamental data about the durability and reliability were obtained by using the experimental test. The analysis of results obtained on the durability of the reactor under emission and injection compositions showed that the hydrogen embrittlement caused by hydrogen and the oxidation corrosion caused by H2O had the most effect on the durability of 1.25Cr-0.5Mo steel in the SNG reactor. However, the hydrogen embrittlement and oxidation corrosion occurred simultaneously under emission conditions, so that the corrosion of the material increased suddenly after a long operating time. Besides, the corrosion of the 1.25Cr-0.5Mo steel under the injection composition was faster than that under the emission composition.