• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.4
• /
• pp.151-157
• /
• 2013

In this study, an externally reinforced structural system for SMC(Sheet Molding Compound) panel water tank, designed according to the Japanese design code, is experimented to evaluate its seismic performance. The test tank is 3m long, 2m wide and 3m high, considering the capacity and size of the shaking table. The measured hydrodynamic pressures are found to be approximately 70% of the Japanese design code values. It may be partially due to the convex shape effect of the unit panels. The analytical results of externally reinforced system based on the measured dynamic water pressures are found in good agreement with the test results. If the design hydrodynamic pressures are estimated properly, the proposed analytical model for the externally reinforced water tank becomes a useful design tool and the Japanese design code is found to provide a safe design for the external frames of SMC panel water tank.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.7
• /
• pp.1118-1127
• /
• 1990

In this paper a new test generation method for Domino CMOS logic circuits is proposed. Because the stuck-at type fault is not adequate for Domino CMOS circuits the stuck-open fault, stuck-on fault and bridging fault are considered as fault models. It is shown that the test generation problem of Domino CMOS circuits results in functional block test generation problem. Test set is generated by using the logic minimizer which is a part of logic design system. An algorithm for reduction of test set is described. The proposed test method can be easily applied to various figures of circuits and make it easy to construct automatic test generator in design system. The proposed algorithms are programed and their efficiency is confirmed by examples.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.67-78
• /
• 2008

The purpose of this paper is to discuss the design and implementation of a WCBT(Web and Computer based Test). The WCBT combines the strengths of both a WBT(Web-based test) and a CBT(Computer-based test) on the basis of efficiency and stability. The current assessment system, considered an important management tool in the construction and operation of a total management system for the national technical qualification, has some unstable elements with regard to system load and stability. The proposed system's technological aspects have been tested through a basic simulation pilot program. The pilot program will be expanded to include the local Chamber of Commerce and Industry because the stability of the system was proved through its application to the real-time national technical examination of KCCI (Korea Chamber of Commerce and Industry). The WCBT system has shown great efficiency in terms of system load, and has solved frequent communication problems which have occurred through the use of foreign qualifying examinations. The server and client systems of the WCBT have been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• Journal of Digital Convergence
• /
• v.4 no.2
• /
• pp.51-65
• /
• 2006

This study is to evaluate the morality of teenagers with regard to features of justice. On the basis of the findings, an online morality level test system is designed and implemented to help students understand themselves better and to increase moral maturity through this self-test method based on Kohlberg's Morality Development Level. The main purpose of this study is to help students test and evaluate their morality, and it will be contributed to slough off egocentrism and to orient a relationship based on a mutual respect by using the embodied system. If this system can be applied successfully, an effective improvement on students' further education guidance may be gained because the test and its results are made in the system simultaneously. Also this easy and fast test system can attain much more economical effects than a written test.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.460-465
• /
• 1993

The instrumentation system is the most important aspect of a flight test program. It is the means by which the objective of a flight test, the production of accurate, useful data, is achieved. An instrumentation system consists of everything required to sense, condition, and record all parameters of interest The task of a flight test engineer is to select a system that is adequate to obtain all needed data, but not complex, expensive, and heavy than the situation demands. In this paper, the primary factors that determine the design of an instrumentation system are discussed.

• Journal of The Korean Association of Information Education
• /
• v.9 no.2
• /
• pp.329-337
• /
• 2005

Lots of developments and changes are happening with ICT utilization in the field of education. However, most teachers can't feel the practical efficiency in an evaluation. Specially, they are not keeping and using continuously the evaluation result. Therefore they cannot reflect the results in continuous learning activity of a child. We developed the test management system that supplies the forms, which facilitate the control of the various test items and are suitable for the test types. Through this system, teachers can easily design the tests and develop the content of evaluation. They can improve educational efficiency using various perspective evaluation results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.611-615
• /
• 2015

Anti-aircraft gun system is used for low-level air defense system and has more than twin guns with high firing rate in order to maximize the capability of defense. Gun's vibration and bullet's variance has a critical effect on accuracy and hit probability of weapon system such as anti-aircraft gun system with high firing rate. Typical mechanism to reduce the amount of vibration and shock during gun-fire process is very important design factor. In this paper, the suspension characteristics of the vehicle are studied for the improvement of isolating performance of gun firing system with high firing rate. Gun fire test for the vehicle is conducted and computational models using Recurdyn and Adams are created based on test results. Through this study, results of computational analysis are compared with the real test results, which includes type, location and quantity of suspension and gun mechanism are selected for anti-aircraft gun. From the result of this study, we could make basic design and consider the proper component of the system such as suspension and gun spring.

• Journal of Digital Convergence
• /
• v.4 no.1
• /
• pp.43-54
• /
• 2006

New technologies have turned theories of education engineering into practice and also made education more efficient. One of them is the theory of 'Computer Adaptive Testing(CAT)'. This study is aimed to design and develop a web-based teaming system by making up for the weak points in the existing computer adaptive testing(CAT). The characteristics of the system are as follows: Firstly, tests can be controlled to fit the teachers' purposes by putting in different levels of both questions and samples. Secondly, this system does not test the same number of questions as students with different levels of ability do on a paper test, but a test can be taken according to their level. Thus this system is able to correctly judge learners' ability in a short time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.430-435
• /
• 2014

This paper presents the case study of the airworthiness certification for the flight control system of tactical UAV. Airworthiness regulations for flight characteristics and design and construction based on the STANAG 4671 are selected, and safety assessment is performed. Stall protection on wing level and turning flight criteria, and flap interconnection system failures were analyzed and applied to the flight control system design. The Hardware-in-the-loop simulation including math model, integrated system verification and validation test and failure mode and effects test were also performed and they are used to validate the means of compliance of the proposed airworthiness.