• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.470-475
• /
• 2000

This research covers the resting of precast/prestressed concrete I-Girder bridge. The research was designed to examine processes for improving the condition evaluation and rating of prestressed concrete bridge. To establish procedures that allow for the full utilization of prestressed concrete bridge capacity, a 28-year old sample was loaded to failure in site. The bridge was constructed with 12 spans, and girders of each span were simply supported. At each loading stage, the deflections, reinforcement strains, prestressing wire strains and concrete strains were examined. Failure behavior was analyzed, and failure load was also evaluated. The test results wee compared to the analytical results from the non-linear finite element analysis.

• The Korean Journal of Ecology
• /
• v.23 no.6
• /
• pp.435-438
• /
• 2000

Diameter distributions describe forest stand structure information. Prediction equations for percentiles of diameter distribution and parameter recovery procedures for the Weibull distribution function based on four percentile equations were applied to develop prediction system of even-aged slash pine stand structure development in terms of the number of stems per diameter class changes. Four percentiles of the cumulative diameter distribution were predicted as a function of stand characteristics. The predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level. Statistically, no significant differences were detected based on the data from 236 evaluation data sets. This stand level diameter distribution prediction system will be useful in slash pine stand structure modeling and in updating forest inventories for the long-term forest management planning.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1989.10a
• /
• pp.1.3-25
• /
• 1989

This paper describes procedures and the results of mineralogical, fabric and pore sixte analyses perforied on four shales to understand time-dependent deforiation behav iour of swell ins shales better. Mineralogical compositions of theme shales are eBtablished froi the results of X-ray diffraction snalysis and chemical analyses. The importance of the fabric in the understanding of swelling behaviour of shales is demonstrated using Scanning Electron Microscope (SRI). The change in pore sixte distribution during the process of swelling is investigated by measuring pore size distribution before and after free swell test. The results Of the Present study imply that the swelling of Shales studied is not attributed to minerals like pyritei anhydrite or swelling clay minerals. The anisotropic swelling behaviour of shales studied ray be explained by fabrics of theme shales and the difference in them. The swelling of theme shales is found to be accoipanied by increase in the volute of pores.

• Journal of Families and Better Life
• /
• v.6 no.1
• /
• pp.149-166
• /
• 1988

The present study was initiated under the hypotheses that value orientation of wives is closely related to their decision making style in home management and that family life satisfaction of wives varies according to their decision making style. To test the hypotheses the following procedures were undertaken; (1) developing measurement instruments for value orientation, decision making style, and family life satisfaction; (2) finding value orientation of wives, their decision making style, and their family life satisfaction by applying the measurement instruments; (3) finding the variables highly affecting value orientation, decision making style and family life satisfaction ; and (4) finding the causal mechanism among value orientation, decision making style, and family life satisfaction. In conclusion , preferences of wives for humanism in value orientation were expected to lead decision making style to person -oriented rater than task-oriented style and , furthermore, to result in higher family life satisfaction.

• Sleep Medicine and Psychophysiology
• /
• v.1 no.2
• /
• pp.117-124
• /
• 1994

Obstructive Sleep Apnea Syndrome(OSAS), that is a complex disease of neuromuscular, respiratory and cardiovascular system, can be cured by various treatment such as weight control, medical and surgical intervention. As most of OSAS may be caused by various anatomical abnormalities, preoperative evaluation for exact anatomical site of obstruction must be needed. And various diagnostic procedures such as fiberoptic nasopharyngoscopy, Mueller test, cinefluoroscopy, cephalometry, computerized tomography, polysomnography would be used for this purpose. Uvulopalotopharyngplasty is currently the most popular method for the patient with OSAS among various surgical maneuvers and is very effective for the relieving the symptoms as like snoring, daytime somnolence, and nocturnal restlessness etc. Although subjective improvement is not compatible with it's objective assessment in postoperative evaluation for it's results, uvulopalatopharyngoplasty could be a recommandable surgical procedure because of it's ample effectiveness in promoting symptom improvement without any risk of serious complications.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.774-775
• /
• 2015

In this paper, a series of electromagnetic analyses carried out for a high efficiency 22.9/0.38kV mold transformer are presented. The simulations were performed in order to calculate the losses which eventually verify the performance(efficiency) of the designed product. Here, losses include core loss, stray losses of non-current carrying metallic structural parts(core plate and clamp), ohmic loss and eddy current loss of current carrying metallic parts(busbars, leads, terminals and windings). The obtained results of the simulations were compared to the test results and showed high level of accuracy. The loss evaluation technology will allow designers avoid any potential over-design or under-design of the high efficiency products, reducing the manufacture cost and development period compared to the conventional experience-based design procedures.

• Asia pacific journal of information systems
• /
• v.9 no.2
• /
• pp.19-37
• /
• 1999

Computer aided process planning(CAPP) is a key for implementing CIM. It is bridge between CAD and CAM and translates the design information into manufacturing instructions. Generally, manufacturing is an area where intelligent systems will not be able to rely on methods requiring formalized knowledge. Manufacturing lacks a body of knowledge that is specific, formalized, and rigorous, and which can be coded as rules or procedures. Thus expertise in manufacturing is developed over a period of many years. Case-based reasoning(CBR) offers a new approach for developing intelligent system. In the case-based approach the problem solving experience of the experts is encoded in the form of cases. CBR's retrieval process can be divided to two step. The first step is matching step, and the second step is selection step. For selecting base case, new preference heuristics were introduced using similarity concept. Similarity concept has three has three dimensions, i.e. entity similarity, structural similarity, and goal similarity. In this paper, bolt's process planning was selected an application domain. Following the test result, the new preference heuristics were approved as a useful procedure in CAPP.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.309-314
• /
• 2000

Rubber is used as a primary suspension component in a vehicle or a mechanical structure. The aim of this study is to establish a procedure for measuring the material properties of rubber and to analyze the differences of material properties of virgin rubber and heat aged rubber. The effect of mechanical conditioning was shown and included in the procedures of tensile. compression. simple shear. and pure shear tests. In addition. using engine oil was recommended for compression test in order not to have barrelling. Moreover, based on the material properties of vil·gin rubber and heat aged rubber. equations of C10 and IRHD were proposed as a function of heat aging temperature and time.

• Journal of Korean Library and Information Science Society
• /
• v.32 no.1
• /
• pp.249-260
• /
• 2001

This paper presents the application of best match search algorithm in the client/server system for natural language access to Web-based database. For this purpose, the procedures to process Korean word variants as well as to execute probabilistic weighting scheme have been implemented in the client/server system. The experimental runs have been done using a Korean test set which included documents, queries and relevance judgements. The experimental results demonstrate that best match retrieval with relevance information is better than the retrieval without it.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.667-675
• /
• 2009

Faults can be generated at electric power systems by variety of both certain and uncertain reasons, which may cause harmful effects on electrical apparatuses under operation and stability of electric power system operations, and may also lead to great confusions and inconveniences to individual livings, public works, industrial activities, services, military affairs, etc.. In some cases, intentional inductions of faults are committed for specific purposes, and it is necessary to understand the procedures of fault by some foreign materials. In this paper, compositions and operations of electric power systems, summaries of electrical fault phenomena and fault protection, and restrictions to power system operation were outlined. And the analogies on the procedure of faults from former papers were introduced, and test results that revealed the validity of those analogies were also introduced.