• Korean Journal of Child Studies
• /
• v.9 no.2
• /
• pp.1-28
• /
• 1988

The purpose of this study was to develop a behavior rating scale for the evaluation of children's development for utilization by preschool teachers. The procedures for the study included content validation, pilot test, and main study. A total of 97 items were retained after the content validation and pilot test. The items of the scale were grouped into five areas (physical, language, cognitive, emotional, and social development) and 11 sub-areas. The resulting "Behavior Rating Scale for Preschool Children" was administered to 479 boys and girls, 3-6 through 6-5 years of age, selected from 10 different kindergartens and early education centers in Seoul, Pusan, and Chonju. The analysis of data was done with SPSS computer programs, including item analysis, Cronbach's ${\alpha}$ for reliability, factor analysis to test construct validity, two-way ANOVA to test age and sex differences, and percentile norms. The 97 items of the scale were found to be satisfactory in terms of item discrimination with indices ranging from .31 to .73. Cronbach's ${\alpha}$ was .98 for the total scale and ranged from .87 to .93 in specific domains, which was considered satisfactory. The factors extracted from each area were consistent with the educational objectives of the Yonsei Open Education Program except for emotional development. The intercorrelations among the domains were relatively high, ranging from .56 to .81. Age differences were significant in cognitive, physical, and language development, but not significant in social and emotional development. Sex differences were significant in all areas with girls higher on the average than the boys. Percentile ranks were drived from the total score for each age group and quartiles were calculated for sub-scores in each domain.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.445-453
• /
• 2015

The stress triaxiality and lode angle are known to be most dominant fracture parameters in ductile materials. This paper proposes a three-dimensional failure strain surface for a ductile steel, called a low-temperature high-tensile steel (EH36), using average stress triaxiality and average normalized lode parameter, along with briefly introducing their theoretical background. It is an extension of previous works by Choung et al. (2011; 2012; 2014a; 2014b) and Choung and Nam (2013), in which a two-dimensional failure strain locus was presented. A series of tests for specially designed specimens that were expected to fail in the shear mode, shear-tension mode, and compression mode was conducted to develop a three-dimensional fracture surface covering wide ranges for the two parameters. This paper discusses the test procedures for three different tests in detail. The tensile force versus stroke data are presented as the results of these tests and will be used for the verification of numerical simulations and fracture identifications in Part II.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.2
• /
• pp.47-57
• /
• 2015

In this study, the experiment was carried out on an experiment group of 24 and a control group of 25 in order to investigate the effect of flipped learning on the motivation and academic achievement of elementary students. Research tools such as flipped learning program, motivation questionnaire and academic achievement questionnaire were used. Study procedures consisted of pre-test, experimental process, and post-test in order and the data processing was performed by independent sample t-test and paired sample t-test. The results show that flipped learning has a positive effect on learning motivation and academic achievement. For instance, flipped learning influenced on improvement of motivation elements such as attention and confidence. Also flipped learning has a more effect on low-level students than high-level students in academic achievement.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.129-134
• /
• 2014

We have developed a cost-effective and facile method to manufacture a pouch-type chemical vapor sampler. Originally, the sampler was developed by U. S. Army Natick Soldier Research, Development, and Engineering Center(NSRDEC) to determine the protective capability of individual protective ensembles or Man-in-Simulant Test (MIST). They used a selectively permeable high density polyethylene(HDPE) as front membrane and aluminum/ Nylon barrier film as an impermeable back sheet in order to mimic the actual adsorption process that occurs when the skin is exposed to chemical weapons. However, it costs over twenty dollars per sampler and the minimum of quantity is 2500 per order. In addition, it is inconvenient to employ a variety of adsorbents into the sampler, which could prevent MIST researchers to do various tests for development of MIST methodologies. Here, we report the simple method to manufacture the sampler in a laboratory scale. All the materials we used are easily obtainable and inexpensive. In addition, all the procedures we perform are generally known. We used methyl salicylate(MeS) vapor to be adsorbed into the sampler and employed several different adsorbents to evaluate the performance of samplers. The results obtained by home-made samplers and commercially avaliable one showed no significant differences. Also, MeS vapor was selectively adsorbed into the sampler depending on adsorbents. We conclude that home-made samplers are capable of collecting any kind of chemical vapor for a variety of purposes.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• International Journal of Highway Engineering
• /
• v.2 no.2
• /
• pp.149-161
• /
• 2000

The stiffness of the subbase materials is represented by the resilient modulus, $M_R$, which are very important properties in the mechanistic design of flexible pavement system. However, the cyclic $M_R$ testing method is too complex, expensive, and time consuming to be applicable on a production basis. In this study, the alternative $M_R$ testing technique for subbase materials was developed using a free-free resonant column (FF-RC) test considering deformational characteristics of subbase materials. To estimate the deformational characteristics of subbase materials, effects of strain amplitude and mean effective stress on modulus of subbase materials were investigated. The $M_R$ values determined by alternative testing procedures matched well with those determined by standard $M_R$ test, showing the capability of the proposed methods being used in determining $M_R$ values.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2011

Arsenic is one of the most abundant contaminant found in waste mine tailings and soil around refinery, Because of its carcinogenic property, the countries like United States of America and Europe have made stringent regulations which govern the concentration of arsenic in soil. The study focuses on solidification/stabilization for removal of arsenic from soil. Cement was used to solidify/stabilize the abandoned soil primarily contaminated with arsenic (up to 68.92 mg/kg) in and around refinery. Solidified/stabilized (s/s) forms in the range of cement contents 5-30 wt % were evaluated to determine the optimal binder content. Revised Korean standard leaching tests (KSLT), toxicity characteristic leaching procedures (TCLP), Old Korea standard leaching test and revised Korea standard leaching test were used for chemical characterization of the S/S forms. The addition of 10 % cement remarkably reduced the leachability of arsenic in contaminated soil. The concentration of As in leachate of TCLP, KSLT, and old KSLT for soil are below the standard. However that in leachate of revised KSLT is above the standard. Because of extraction fluid used in revised KSLT is very strong acid. It is arsenic in s/s with binder should be exhaustingly leached. Therefore S/S process would not be available for As treatment in soil in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3802-3807
• /
• 2011

In this study, in-plane and out-plane compression tests of aluminum foam and honeycomb sandwich composites were carried out. Through these tests, the relationships of load-displacements were analyzed and the compression characteristics were compared with each other. The specimens were compressed with the speed of 1mm/min by using the universal testing machine. Experimental procedures were taken with photograph by the camera and load cell data were stored into computer. Test results showed that buckling was occurred at the aluminum foam core and honeycomb core according to the increase of load. In the in-plane compression test, the maximum load of aluminum foam specimen was similar with that of honeycomb sandwich. The property of honeycomb was better than that of the foam in consideration of specific gravity. In the out-plane compression test, compression maximum load of aluminum honeycomb sandwich composite was higher than that of aluminum foam sandwich composite.

• Journal of Periodontal and Implant Science
• /
• v.51 no.4
• /
• pp.276-284
• /
• 2021

Purpose: The aim of this randomized clinical trial was to assess whether chemical cleansing using a sulfonic/sulfuric acid gel solution (HBX) as an adjunct to scaling and root planing (SRP) resulted in a decrease in residual plaque and calculus in deep periodontal pockets compared to SRP alone. Methods: Fifty-six patients with 56 hopeless posterior teeth, scheduled for extraction due to severe periodontitis, were enrolled in this study. Each tooth was randomly assigned to 1 of the 2 experimental procedures. The test teeth were subjected to the irrigation of the subgingival area with HBX for 2 minutes, followed by SRP with hand and ultrasonic instruments for 14 minutes, and then extracted. The control teeth received only mechanical instrumentation before extraction. Residual biofilm was evaluated on photographs and measured as total area and percentage of root surface covered by remaining plaque (RP) or calculus (RC) after treatment. Results: The initial pocket depth (PD) and total subgingival root surface area were similar between the 2 treatment groups. After treatment, the total subgingival root area covered by RP and RC was statistically significantly larger (P<0.001) in the control group than in the test group. The test teeth showed a lower percentage of RP, but a higher percentage of RC than the control teeth (both P<0.001). Complete calculus removal was achieved in 42% of the control teeth surfaces and in 25% of the test teeth surfaces for a PD of 4 mm. Conclusions: The additional chemical cleansing with HBX resulted in a statistically significant improvement in bacterial plaque removal during SRP of deep pockets, but it was not effective in reducing calculus deposits.

• Journal of Korean Critical Care Nursing
• /
• v.15 no.3
• /
• pp.88-100
• /
• 2022

Purpose : This study aimed to identify risk factors for unplanned reintubation after planned extubation and to analyze the clinical outcomes in patients admitted to the intensive care unit after cardiac surgery. Methods : The study examined patients who underwent intubation and planned extubation admitted to the intensive care unit after cardiac surgery between January 1, 2017, and December 31, 2021. The reintubation group comprised 58 patients underwent unplanned reintubation within 7 days of planned extubation. The maintenance group comprised 116 patients who did not undergo reintubation and were matched with the reintubation group using the rational for matching criteria. Data were collected retrospectively from electronic medical records. We used the independent t-test, Mann-Whitney U test, 𝑥²-test, Fisher's exact test, and logistic regression analysis with SPSS/WIN 27.0. Results : The multivariate logistic regression analysis demonstrated that albumin (odds ratio [OR]=0.38, 95% confidence interval [CI]=0.20-0.72), surgery time (OR=1.54, 95% CI=1.20-1.97), PaO₂ before extubation (OR=0.85 per 10 mmHg, 95% CI=0.75-0.97), postoperative arrhythmia (OR=2.82, 95% CI=1.22-6.51), reoperation due to bleeding (OR=4.65, 95% CI=1.27-17.07), and postoperative acute renal failure (OR=2.97, 95% CI=1.09-8.04) were risk factors for unplanned reintubation. The reintubation group had a higher in-hospital mortality rate (𝑥²=33.74, p<.001), longer intensive care unit stay (Z=-7.81, p<.001), and longer hospital stay than the maintenance group (Z=-8.29, p<.001). Conclusion : These results identified risk factors and clinical outcomes of unplanned reintubation after planned extubation after cardiac surgery. These findings should be considered when developing and managing an intervention program to prevent and reduce the incidence of unplanned reintubation.