• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.97-104
• /
• 2015

KIGAM has surveyed most of the Korean territory since 1982 using airborne gamma-ray spectrometry, and complete the nationwide scale map in the near future. However, since the duration of survey is too long and the conditions of survey is not consistent, the data does not have physical consistency. In addition, the window counts (count/sec) were recorded instead of potassium, uranium and thorium radioelement concentrations. Thus, the data could not be registered to the International Atomic Energy Agency (IAEA) radioelement datum. This limits the usefulness of the data and it is not possible to easily combine surveys into regional compilations or make quantitative interpretations between different survey areas. To solve these problems, we undertook a test baseline survey over Jincheon-Eumseong area, to level the different two sets of data and to map radioelement concentrations. This survey confirms to IAEA radioelement baseline. The method and procedures of data leveling prepared by this study improve the usefulness and usability of the radiometric data, and make it enable to compile the nationwide scale radioelement concentration maps.

• Korea Journal of Hospital Management
• /
• v.6 no.3
• /
• pp.5-24
• /
• 2001

The purpose of this study was to serve as a basis for providing quality medical service and mapping out consumer-centered marketing strategies to successfully cope with the rapidly changing medical environment and meet consumer needs, by examining what affected the satisfaction and revisit of health Promotion center Client. The subjects in this study were 186 of visitor to health Promotion center in a university hospital in the city of Busan. A survey was conducted with structured questionnaire from March 2 to 30, 2001. The collected data were analyzed with SPSS for Windows (ver10.0). For more statistical analysis, frequency analysis, component analysis, t-test, ANOVA and correlation analysis procedures were utilized. Results of the study can be summarized as follows: 1. Regarding demographic characteristics, 51.6% of the Client investigated were male, and 48.4% were female. The greatest number of them were in their 40s(38.9%). 86.5% were married, and 34.2% were self-employed. 44% were a high-school graduate, and the monthly mean income of 59.4% was one to three million Won. And, the residential area of 46.8%, the largest percentage, was a half-an-hour distance from health Promotion center. 2. The most common motivation of their selection of the health Promotion center was a recommendation by Staff and neighborhood(59.7%), followed by excellent facilities and services(17.2%), the tradition and reputation of the hospital(7.5%), and its publicity pamphlets(7.5%). 3. 45.9%, the largest percentage, acquired health-related information from their friends or acquaintances. 43.8%, the greatest percentage, visited there because they felt there's something wrong with their body. 53.4% worried about the possibility of being attacked by cancer, and 57.5% wanted to take a precise cancer examination. For health maintenance, 50.1% got regular exercise. Regular exercise was considered most crucial for health maintenance or promotion. 4. The largest reason they used that examination center again was the kindness of employees(52.7%), followed by the tradition and reputation of the hospital(21%) and excellent examination setting and equipment(10.8%). 5. By demographic factor, there was no significant difference between the man and women in satisfaction level with examination and expenses. The women expressed more satisfaction at facilities, and the high-school graduate group were more contented with expenses. 6. As a result of investigating their satisfaction level according to the motivation of selecting that examination center, the group that chose the center due to excellent facilities and services were more satisfied with examination and expenses. 7. As for the relationship of total examination satisfaction to revisit. intention, there was a higher correlational relationship between total health examination satisfaction and expense satisfaction. Especially, the more they were satisfied with examination, the more they were willing to revisit there for another examination.

• Korea Journal of Hospital Management
• /
• v.5 no.1
• /
• pp.232-271
• /
• 2000

The introduction of a team system to any organization is usually to improve that organizations dynamics, by increasing the proper adaptation to rapidly changing environments, by reducing approval procedures, and by promoting power authorization. In this regard, this study was carried out in an attempt to determine (1) whether or not the introduction of a team system can be as effective in hospital organizations as it has been in business organizations, and (2) what behavior factors influence such effectiveness. For the current study, questionnaires were distributed to the employees of a university hospital in Pusan. Four hundred eighty three of them(94.7%) were retrieved and analyzed through statistical processes. The three types of variables that were found to influence team effectiveness were: (1) independent variables of team organization characteristics, such as communication, organizational atmosphere, leadership and team knowledge, (2) intervening variables of team organization characteristics. such as job autonomy, technological variety, task subjectivity, task feedback and task importance, and(3) the dependent variables of team level effectiveness, such as job satisfaction and commitment to team organization. The gathered data were processed by using the 6.12 version of the statistical program SAS(Statistical Analysis System), and the reliance coefficient of those measured variables was then evaluated as an average of 0.78. The influence of team level effectiveness was analyzed by using multiple regression analysis. These differences in effectiveness were then analyzed on the basis of related mean values, while the differences among demo-sociological characteristics were analyzed by using the dispersion analysis(ANOVA) and the t-test. The results of the study can be summarized by the following. First, regarding the relationship between team organization characteristics and team level effectiveness, all of the factors including communication, organizational atmosphere, leadership and team knowledge were found to have a significant influence on effectiveness. Second, the factors of team job characteristics, such as technological variety, task importance and job autonomy, had significant effects on job satisfaction and organizational commitment among the teams members. Team level effectiveness was generally high, while team job satisfaction was higher the teams organizational commitment. Third, regarding the demo-sociological characteristics, team level effectiveness was found to be higher among those who were older, who had more job experience, and who had a higher position. Comparing the differences among job types, the effectiveness was relatively higher in the fields of nursing and administration/management then in other fields. Further study should be done towards the setting of variables for characteristics of hospital organization, developing suitable methods of measurement, and researching individual level effectiveness.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.431-443
• /
• 2007

Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.

• Physical Therapy Korea
• /
• v.7 no.1
• /
• pp.1-21
• /
• 2000

The purposes of this study were to research the current state of evaluation of children with delayed development and cerebral palsy and determine pediatric physical therapists' knowledge of assessment tools and their use. The subjects were 130 pediatric physical therapists (general hospitals, university-related hospitals, rehabilitation centers, etc.). Data was obtained from August 24, 1999 to October 18, 1999 by means of a survey questionnaire. The results were as follows: 1. The current state of pediatric physical therapist evaluation of children with delayed development and cerebral palsy. 1) Tools used to assess functional areas of children with cerebral palsy were: subjective description format-128 (47.1%); the GMFM-58 (21.3%); facility-generated tool-51 (18.8%); and DDST-15 (5.5%). 2) Tools used to assess developmentally delayed children were: subjective description format-121 (50.6%); the GMFM-43 (18.0%); facility-generated tool-41 (17.2%); and DDS T-14 (5.9%). 3) After their college or university study, therapists who had attended lectures on evaluation were 113 (86.9%); 13 (10.0%) therapists had not attended any lectures on evaluation 2. Test scores of physical therapists' professional knowledge of evaluation procedures: high (more than 36 points)-74 (56.9%); moderate (18~35 points)-39 (30.0%); and low (below 17 points)-none. 1) For therapists treating cerebral palsied children, 73 (65.2%) were in the high range, 39 (34.8%) were in the moderate range and none were in the low range. 2) For therapists treating children with delayed development, 71 (65.7%) were in the high range, 37 (34.3%) were in the moderate range and none were in the low range. Although the general degree of professional knowledge of evaluation was quite high, there was a lack of variety in the assessment tools used With a large number of therapists depending on subjective description. Possible reasons for the low rate of objective asses sment tool use: 1) Poor clinical environment: too many clients and lirnited treatment time. 2) Lack of any medical insurance fee category for specific assessment tools. 3) Lack of continuing education opportunities in pediatric evaluation skills during or after either college-based (3 year) or university-based (4 year) education programs. Based on the study results, provision of more extended educational opportunities would promote the use of a greater variety of objective assessment tools by pediatric physical therapists.

• Journal of The Korean Association of Information Education
• /
• v.21 no.2
• /
• pp.199-208
• /
• 2017

The present study investigates the potential of an educational programming game as a strategy for enhancing effective domains of mathematics curriculum, which has been criticized as a problem of education in Korea. The process of programming Fortress, an educational game, in conjunction with the lesson on the trigonometric function as part of the middle school mathematics curriculum, was designed for instruction and learning, and its effectiveness was tested. The study was conducted using a nonequivalent pretest-posttest experimental design. Research procedures included the following steps: (1) both the experimental and the comparison groups participated in four classes to understand and apply the concept of the trigonometric function, and (2) the experimental group participated in Fortress game programming activities using Scratch, which was designed in this study, while the comparison group participated in solving a real-life trigonometric problem - calculating the height of a building using the concept of trigonometry. The results of the t-test showed that students' interest and perceived value of the mathematics curriculum were significantly higher in the experimental group than in the comparison group. However, the results of analysis of covariance (ANCOVA) using pretest scores of the interest and perceived value showed the influence of pretest scores on posttest scores for the interest level, although the effect of the experiment on the perceived value of the mathematics curriculum was more significant.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.429-440
• /
• 2001

To achieve a computer tutor framework with high learning effects as well as practicality, the goal of this research has been set to developing an intelligent tutor for problem-solving in mathematics domain. The maine feature of the CyberTutor, a computer tutor developed in this research, is the facilitation of a learning environment interacting in accordance with the learners differing inferential capabilities and needs. The pedagogical information, the driving force of such an interactive learning, comprises of tutoring strategies used commonly in various domains such as phvsics and mathematics, in which the main contents of learning is the comprehension and the application of principles. These tutoring strategies are those of testing learners hypotheses test, providing hints, and generating explanations. We illustrate the feasibility and the behavior of our propose framework with a sample problem-solving learning in geometry. The proposed tutorial framework is an advancement from previous works in several aspects. Firstly, it is more practical since it supports handing of a wide range of problem types, including not only proof types but also finding-unkown tpes. Secondly, it is aimed at facilitating a personal tutor environment by adapting to learners of varying capabilities. Finally, learning effects are maximized by its tutorial dialogues which are derived from real-time problem-solving inference instead of from built-in procedures.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.261-271
• /
• 2003

A condition evaluation procedure for the pavement foundations using multi-load level Falling Weight Deflectometer(FWD) deflections is presented in this paper. A dynamic finite element program incorporating a stress-dependent material model, was used to generate the synthetic deflection database. Based on this synthetic database, the relationships between surface deflections and critical responses, such as stresses and strains in base and subgrade layers, have been established. FWD deflection data, Dynamic Cone Penetrometer(UP) data, and repeated load resilient modulus testing results used in developing this procedure were collected from the Long Term Pavement Performance (LTPP) and North Carolina Department of Transportation (NCDOT) database. Research effort focused on investigation of the effect of the FWD load level on the condition evaluation procedures. The results indicate that the proposed procedure can estimate the pavement foundation conditions. It is also found that structurally adjusted Base Damage Index (BDI) and Base Curvature Index (BCI) are good indicators for the prediction of stiffness characteristics of aggregate base and subgrade respectively. A FWD test with a load of 66.7 kN or less does not improve the accuracy of this procedure. Results from the study for the nonlinear behavior of a pavement foundations indicate that the deflection ratio obtained from multi-load level deflections can predict the type and quality of the pavement foundation materials.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.143-149
• /
• 2004

Background: Some clinical trials have reported that a new analgesic combination of tramadol and acetaminophen provides good efficacy in various pain models. For the more clinical uses of this agent, comparisons about the onset of analgesia and analgesic efficacy in the acute state of pain with the other drugs known as strong analgesics were needed. Purpose: The goal of this study was to compare the times to onset of analgesia and the other analgesic efficacy of 75 mg tramadol/650 mg acetaminophen and 20 mg codeine/500 mg acetaminophen/400 mg ibuprofen in the treatment of acute pain after oral surgery. Patients and Methods: Using a randomized, single-dose, parallel-group, single-center, and active-controlled test design, this clinical study compared the times to onset of analgesia using a two-stopwatch technique and the other analgesic efficacy of the single-dose tramadol/acetaminophen and codeine/acetaminophen/ibuprofen. These were assessed in 128 healthy subjects with pain from oral surgical procedures involving extraction of one or more impacted third molars requiring bone removal. From the time of pain development, the times to onset of perceptible and meaningful pain relief, pain intensity, pain relief, an overall assessment, and adverse events of the study medications were recorded for 6 hours. Results: The demographic distribution and baseline pain data in the two groups were statistically similar. The median times to onset of perceptible pain relief were 21.0 and 24.4 minutes in the tramadol/acetaminophen and codeine/acetaminophen/ibuprofen groups respectively and those to onset of meaningful pain relief were 56.4 and 57.3 minutes, which were statistically similar. The other efficacy variables such as mean total pain relief (TOTPAR) and the sum of pain intensity differences (SPID) were also similar in the early period after pain development and drug dosing. The safety of tramadol/acetaminophen was well tolerated and very comparable to that of codeine/acetaminophen/ibuprofen. Conclusions: In this acute dental pain model, the onset of analgesia and analgesic efficacy of tramadol/acetaminophen was comparable to that of codeine/acetaminophen/ibuprofen. These results showed that tramadol/acetaminophen was recommendable for fast and effective treatment in the management of postoperative acute pain.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.464-469
• /
• 2011

Introduction: As dental implant surgery is becoming increasingly popular, it has become one of the causes for the hypesthesia of the inferior alveolar nerve, along with other surgical procedures, such as a third molar extraction. In addition, it tends to cause legal problems between the operator and patient. Therefore, there must be a proper method that is reliable, objective and economical to assess the nerve impairment. For this reason, an attempt was made to use an Electric Pulp Tester to assess inferior alveolar nerve block anesthesia. Materials and Methods: Thirty patients were tested. Electric pulp testing of the lower jaw skin was performed at the three different times, before anesthesia, at the onset of sensory changes and after 15 minutes waiting from the onset, and on the 10 points of the chin, which produced 10 sections on the skin area. Results: Twenty seven patients (90%) could feel the electric stimulus on the chin at all 10 points before local anesthesia and the scores represent the statistical differences between the right and left points except R4 and L4. After anesthesia, the difference between the right and left points (L3-R3, L4-R4, L5-R5) increased significantly with time but two points (L2, R2) showed no significant difference. The scores on the left chin (L3, L4, L5) increased, whereas the other points (R1-R5, L1, L2) showed no significant differences. Conclusion: This study highlights the potential clinical use of an electric pulp tester for an assessment of inferior alveolar nerve impairment.