• Proceedings of the Korea Water Resources Association Conference
• /
• 1990.07a
• /
• pp.19-19
• /
• 1990

The paper presents the development and applications of physically-based urban runoff analysis model, URAM, which is capable of simulating sewer runoff hydrographs and inundation conditions within a small urban catchment. The model considers three typical flow conditions of urban drainage networks, whichn are overland flow, gutter flow, and conduit flow during a storm. Infiltration, retention storage and flow routing procedures are physically depicted in model. It was tested satisfactorily with field data from a tested catchment having drainage area of 4.91 ha. It was also applied to other urban areas and found to adequately simulate inundation areas and duration as observed during storms. The test results as well as model components are described in the paper.

• Korean Journal of Logic
• /
• v.23 no.2
• /
• pp.71-115
• /
• 2020

It seems certain that even if the same evidence is in itself given for any hypotheses, the way how it is obtained makes some differences in its support degree of them. In this respect, it is worth paying our attention to Mayo's conception of "severe test" and her technical development of it, which are just concerned with the procedures of getting evidence. Nonetheless, there have been criticisms against her theory from various respects. Among them, here this paper focuses on those especially raised by Jung (2018) and Iseda (1999). And it attempts to defend Mayo's theory on behalf of her against their critiques. For this purpose, the paper also proposes particularly a new concept of what is called the "mechanism generating an evidence-hypothesis". On the way, Mayo's own faults are revealed as well.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.4
• /
• pp.231-239
• /
• 1998

A $3{\times}2$ crossover design is considered for the bioequivalence of two test formulations with a control. It could be considered as a better choice over $3{\times}3$ crossover design because of the cost and experimental duration. Oh et al.(1998) derived $3{\times}2$ crossover design and discussed its benefits over the typical crossover designs. We consider here the statistical models for $3{\times}2$ crossover design and show its statistical properties. The statistical procedures for the bioequivalence in $3{\times}2$ crossover design are shown through an example and the results are summarized by satisfying the 3 standards that proposed by the Korea Food and Drug Administration Guidelines for Bioequivalence.

• Restorative Dentistry and Endodontics
• /
• v.39 no.3
• /
• pp.210-214
• /
• 2014

Objectives: To investigate the prevalence of different primary reasons for endodontic referrals and the clinical symptoms of the referred cases. Materials and Methods: Clinical data of total endodontic treatment cases (1,014 teeth) including endodontic referral cases (224 teeth) between January 1, 2010 and December 31, 2012, at Kangdong Sacred Heart Hospital, were investigated retrospectively. The one major reason for referral, the clinical symptoms, and the resulting treatment procedures of referral cases were recorded. The percentages of clinical symptoms of the endodontic referral cases and the total endodontic treatment cases were compared by ${\chi}^2$ test for each symptom. Results: Persistent pain was the most frequent reason for endodontic referral (29.5%), followed by presence of gingival swelling and sinus tract (24.1%), and apical radiolucency (12.9%). Referrals in cases involving endodontic difficulties such as canal calcification, broken instruments, post, perforation, and resorption were less than 5.0%, respectively. The percentages of four major clinical symptoms of pain, apical radiolucency, previous endodontic treatment, and gingival swelling and sinus tract were significantly higher in the endodontic referral cases than those in the total endodontic cases (p = 0.001). Among the included referral cases, 72.8% were treated with nonsurgical endodontic treatment only. Teeth other than the referred teeth were diagnosed as the origin of the problem in 5.8% of the referrals. Conclusions: The high prevalence of pain, apical radiolucency, previous treatment, and gingival swelling and sinus tract in endodontic referral cases suggest that these symptoms may be what general practitioners consider to be difficult and refer to endodontists.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.3
• /
• pp.140-144
• /
• 2009

Clinical laboratory testing plays a crucial role in the detection, diagnosis, and treatment of disease. Clinical laboratory scientists evaluate test results, develop and modify procedures, and establish and monitor programs, to ensure the accuracy of tests. It is clear that over the past decade the role of the clinical laboratory scientists has expanded and this process will be continued into the future. The purpose of this study is to clarify the factors influencing the job performance of clinical laboratory scientists and aim to provide the role and duties of clinical laboratory scientists. To examine the frequency of work context and the importance of task, the surveys were conducted on 168 clinical laboratory scientists. The questionnaire items were used 10 score by Likert scale. According to the results of this study, the important factor affecting the job performance was "Analyze laboratory findings to check the accuracy of the results", and the next factors were "Establish and monitor quality assurance programs", "Enter data from analyzer into computer", "Calibrate and maintain equipment". And the factors of "repeating same tasks" and "spend time making repetitive motions" were answered the highest. This study will provide strategies for improving work environment, developing education curriculum and method, and role of clinical laboratory scientists. We must continually upgrade our knowledge, and identify the new trends in technology and science and accept changes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.2
• /
• pp.132-147
• /
• 1996

The optimal design of floating type fisheries facilities in the open sea is demanded considering with the severe hydrodynamic forces on floating body, mooring tension and holding force of anchor. For conserving the facilities in most effective state, design and selection of anchor system is one of the most important fundamental subject. To enhance the design procedure of anchor system the holding forces of anchor are investigated by the hydraulic model test and are compared with the typical conventional results for various anchors. Applicability of previous estimation methods of holding force are checked and holding mechanism of anchor is discussed. Using the results a new computational concept of holding force is suggested considering mainly the effects of passive soil pressure (resistance), steady soil pressure, and surface friction etc. The new estimation method is proved as a feasible one by comparing the results of hydraulic model experiments. Applicability of various anchors to the anchor system on open sea fisheries structures is comprehensively reviewed using the present model tests and previous study results in the viewpoint of economy, construction and stability etc. Using the results, fundamental anchoring system design procedures are suggested to apply huge marine ranching complex with increase of the holding capacity of anchor under the optimum cost.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.2
• /
• pp.309-324
• /
• 2011

The purpose of this study is to develop evaluation indicators for academic libraries in Korea. The evaluation model developed in this research consists of three elements:(1) Confirmation of evaluation methods, procedures and criteria,(2) Development of qualitative and quantitative evaluation indicators, and(3) Assessment of the applicability and feasibility of those indicators. Evaluation indicators were developed to measure a basic state, a common use of library resources, specialized services, and user satisfaction for academic libraries. To test the feasibility and applicability of those evaluation indicators, a pilot assessment of academic libraries was conducted in 2010.

• Journal of Periodontal and Implant Science
• /
• v.41 no.3
• /
• pp.131-134
• /
• 2011

Purpose: To test the plaque-removal efficacy of a single-tufted toothbrush on the posterior molars compared with a flat-trimmed toothbrush. Methods: Forty-nine subjects were selected. Professional instruction and written brushing instructions were given. After thorough supra-gingival scaling and polishing, all subjects were asked to abstain from oral hygiene procedures for 24 hours prior to the first experiment. The subjects were randomized to a treatment sequence. The modified Quigley and Hein plaque index was recorded pre- and post-tooth brushing, at 6 surfaces of the posterior molars. After a wash-out period, all the remaining plaque was removed professionally. Twenty-four hours of brushing abstinence was again performed. The plaque index was recorded pre- and post-tooth brushing after the subjects were given the second toothbrush in the cross-over sequence. Results: The percentage reductions in plaque scores achieved with the single-tufted brushes were significantly higher than those of the flat-trimmed brush at the maxillary buccal interproximal, marginal and mandibular lingual interproximal site. The other locations showed no significant difference. Conclusions: The results of the present study implied that the single-tufted brush could be an effective tool for the removal of plaque at some, but not all, sites of the posterior molars.

• Korean Journal of Child Studies
• /
• v.15 no.1
• /
• pp.5-21
• /
• 1994

The purpose of this study was to develop a scale for evaluation of early childhood programs in Korea. The procedures included content validation and a pilot test. A total of 192 items in 10 major areas was developed based on the review of literature and discussions with professionals in early childhood education. The 10 areas include: scheduling, curriculum, interation, physical environment, materials, nutrition, health and safety, administration, staff qualifications, relationships with parents, and evaluation. The pilot scale was administered to 428 classroom teachers and directors, and 47 college professors in early childhood education. The items were rated on a 3-point scale in terms of importance as evaluation criteria. The methods for data analysis included item means and standard deviations for content validation, Cronbach ${\alpha}$ for reliability, and factor analysis for construct validity. Most items in 10 areas were rated as moderate to highly important (average 2.3), especially items in curriculum and staff qualifications. Two factors emerged from the data: institutional management, and curricular planning and implementation. The Cronbach ${\alpha}$ levels were .70 or higher in most areas, but the range covers from .48 to .91. Based on the pilot data, 143 items were selected for the second year study.

• Journal of Magnetics
• /
• v.19 no.2
• /
• pp.155-160
• /
• 2014

The heating produced by the absorption of radiofrequency (RF) has been considered a secondary undesirable effect during MRI procedures. In this work, we have measured the power absorbed by distilled water, glycerol and egg-albumin during NMR and non-NMR experiments. The samples are dielectric and examples of different biological materials. The samples were irradiated using the same RF pulse sequence, whilst the magnetic field strength was the variable to be changed in the experiments. The measurements show a smooth increase of the thermal power as the magnetic field grows due to the magnetoresistive effect in the copper antenna, a coil around the probe, which is directly heating the sample. However, in the cases when the magnetic field was the adequate for the NMR to take place, some anomalies in the expected thermal powers were observed: the thermal power was higher in the cases of water and glycerol, and lower in the case of albumin. An ANOVA test demonstrated that the observed differences between the measured power and the expected power are significant.