• ETRI Journal
• /
• 제36권6호
• /
• pp.942-952
• /
• 2014

This paper presents a novel test point insertion (TPI) method for a pseudo-random built-in self-test (BIST) to reduce the area overhead. Recently, a new TPI method for BISTs was proposed that tries to use functional flip-flops to drive control test points instead of adding extra dedicated flip-flops for driving control points. The replacement rule used in a previous work has limitations preventing some dedicated flip-flops from being replaced by functional flip-flops. This paper proposes a logic cone analysis-based TPI approach to overcome the limitations. Logic cone analysis is performed to find candidate functional flop-flops for replacing dedicated flip-flops. Experimental results indicate that the proposed method reduces the test point area overhead significantly with minimal loss of testability by replacing the dedicated flip-flops.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.650-658
• /
• 1998

The pressure level and the insertion loss at the receiving point behind finite length noise barriers are measured in an anechoic room by scale model test. The measured sound pressure level which are conducted under the several experimental conditions such as the length of the noise barrier, the distance between the noise barrier and the receiving point, the number of noise barriers, and the existence of the reflective building behind receiving point) and the insertion loss of a noise barrier having simple shape are well agreed with theoretical calculation which is based on Lam's model.

• 한국정보처리학회논문지
• /
• 제7권3호
• /
• pp.935-942
• /
• 2000

In this paper we introduce a fast simplification algorithm for terrain height fields to produce a triangulated irregular network, based on the greedy insertion algorithm in [1,4,5]. Our algorithm partitions a terrain height data into rectangular blocks with the same size ad simplifies blocks one by one with the greedy insertion algorithm. Our algorithm references only to the points and the triangles withing each current block for adding a point into the triangulation. Therefore, the algorithm runs faster than the greedy insertion algorithm, which references all input points and triangles in the terrain. Our experiment shows that partitioning method runs from 4 to more than 20 times faster, and it approximates test height fields as accurately as the greedy insertion algorithms. Most greedy insertion algorithms suffer from elongated triangles that usually appear near the boundaries. However, we insert the four corner points into each block to produce the base triangulation of the block before the point addition step begins so that elongated triangles could not appear in th simplified terrain.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.375-386
• /
• 2024

Autonomous weapon systems act according to artificial intelligence-based judgement based on recognition through various sensors. Test and evaluation for various scenarios is required depending on the characteristics that artificial intelligence-based judgement is made. As a part of this approach, this paper proposed a LiDAR point cloud augmentation method for mixed-reality based test and evaluation. The augmentation process is achieved by mixing real and virtual LiDAR signals based on the virtual LiDAR synchronized with the pose of the autonomous weapon system. For realistic augmentation of test and evaluation purposes, appropriate intensity values were inserted when generating a point cloud of a virtual object and its validity was verified. In addition, when mixing the generated point cloud of the virtual object with the real point cloud, the proposed method enhances realism by considering the occlusion phenomenon caused by the insertion of the virtual object.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.102-107
• /
• 1997

A stiffness in a dynamical system is numerically studied to investigate a sensitivity of a reactor to the delayed neutron spectra with the Doppler feedback. To test numerical procedure, we adopted a case of a reactivity accident in a point reactor model. We found that the stiffness is sensitive to a reactivity insertion rate and the delayed neutron spectra in the Doppler feedback phase. Our numerical results show that global reactor characteristics are not very sensitive to the delayed neutron spectra even though their instantaneous ones are sensitive. We present the time evolution of each precursor group explicitly.

• Journal of Periodontal and Implant Science
• /
• 제41권2호
• /
• pp.79-85
• /
• 2011

Purpose: The aim of this study was to obtain objective and standardized information on masticatory function and patient atisfaction following second molar single implant therap. Methods: Twenty adult patient, who had restored second molar single implants more than 1 month before the study, were enrolled in this stud. All patients received a chewing test using peanuts before and after insertion of the implant prosthesi, with a questionnaire and visual analogue scale (VAS) to evaluate the effect of second molar single implant therap. Results: his study obtained standardized information on the masticatory function objectively (e.g., P, R, $X_{50}$) before (Pre-insertion) and after insertion (Post-insertion) of the implant prosthesis. Masticatory performance (P) after insertion of the implant prosthesis significantly increased from $67.8{\pm}9.9$ to $84.3{\pm}8.5$% (P<0.0001). With the implant prosthesis, the P value increased by 24%. The masticatory efficiency index (R) of Post-insertion is higher than that of Pre-insertion (P<0.0001). With the implant prosthesis, the R value increased by 29%. The median particle size ($X_{50}$) of Post-insertion is lower than that of Preinsertion (P<0.0001). More than 90% of the patients were satisfied with the second molar single implant therapy from a functional point of view. Conclusions: These findings indicate that a second molar single implant can increase masticatory function.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• 대한간호학회지
• /
• 제44권4호
• /
• pp.437-445
• /
• 2014

Purpose: This study was done to identify pain perception (P-PER) by nurses and pain expression (P-EXP) by patients in critical care units (ICUs) and degree of agreement between nurses' P-PER and patients' P-EXP. Methods: Nurses' P-PER was measured with a self-administered questionnaire completed by 99 nurses working in ICUs during May, 2013. Patients' P-EXP was measured with the Critical Care Non-Verbal Pain Scale through observations of 31 ICU patients during nine nursing procedures (NPs) performed between May and July, 2013. Results: Nurses' P-PER was from 4.49 points for nasogastric tube (NGT) insertion to 0.83 for blood pressure (BP) measurement based on a 9-point scale, Patients' P-EXP was 4.48 points for NGT to 0.18 for BP measurement based on a 10-point scale. Eight NPs except oral care showed higher scores for nurses' P-PER than for patients' P-EXP. Position change (p=.019), subcutaneous injection (p<.001), blood sugar test (p<.001), and BP measurement (p<.001) showed significant differences between nurses' P-PER and patients' P-EXP. Conclusion: Nasogastric tube (NGT) insertion was scored highest by both nurses and patients. Eight NPs except 'oral care' showed nurses' P-PER was higher or similar to patients' P-EXP, which indicates that nurses may overestimate procedural pain experienced by patients.

• 한국멀티미디어학회논문지
• /
• 제10권10호
• /
• pp.1260-1270
• /
• 2007

테스트 기술자들에게 아날로그 회로(또는 혼합신호 회로)의 테스트와 진단은 여전히 어려운 문제여서 이를 해결할 수 있는 효과적인 테스트 방법이 크게 요구된다. 본 논문에서는 time slot specification(TSS) 기반의 내장 전류감지기(Built-in Current Sensor)를 이용한 새로운 아날로그 회로의 테스트 기법을 제안한다. 또한 TSS에 기반 하여 고장 위치를 찾아내고 고장의 종류를 구별해 내는 방법을 제시한다. TSS 기법과 함께 제안하는 내장 전류감지기는 높은 고장 용이도와 높은 고장 검출을 그리고 아날로그 회로내 강고장과 약고장에 대한 높은 진단율을 갖는다. 제안하는 방법에서는 주출력과 전원단자등을 테스트 포인트로 사용하고 전류감지기를 자동 테스트 장치(Automatic Test Equipment)에 구성하므로써 테스트 포인트 선택과정의 복잡도를 줄일 수 있다. 내장 전류 감지기의 디지털 출력은 아날로그 IC 테스트를 위한 내장 디지털 테스트 모듈과 쉽게 연결된다.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.71-76
• /
• 2017

열 소결 공정 중 소결 온도와 시간을 다르게 하여 제작된 은 인쇄회로의 전기적 거동과 유연성을 분석하였다. 은 인쇄회로의 비저항값과 고주파 전송 특성을 4-포인트 프로브 및 네트워크 분석기를 사용하여 각각 측정하였다. 비저항값은 DC 전류가 회로에 흐를 때의 전기 저항을, 고주파 전송 특성은 은 회로의 신호 전송 특성을 의미한다. 은 인쇄회로의 유연성은 IPC 슬라이딩 테스트 중 발생하는 회로 저항의 변화를 실시간으로 측정하여 평가하였다. 은 인쇄회로의 파괴 모드는 주사전자 현미경과 광학 현미경을 통해 관측하였다. 폴리이미드 기판 위에 인쇄된 은 회로의 비저항값은 소결 온도와 소결 시간이 증가함에 따라 급격하게 감소하였다. $250^{\circ}C$에서 45분간 열 소결된 은 인쇄회로의 비저항값이 가장 낮았으며 그 때의 값은 $3.8{\mu}{\Omega}{\cdot}cm$였다. 은 인쇄회로에서 발생한 균열은 슬라이딩 테스트 10만번 이후의 길이가 2.5만번 테스트 후의 균열보다 열 배는 더 길게 측정되었다. 측정된 전송계수와 반사계수는 전산모사 결과와 그 경향이 거의 일치하였으며 슬라이딩 테스트가 진행될수록 은 회로의 전송손실은 증가하였다.