• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.59-62
• /
• 2012

This test method covers a procedure for measuring particle removal characteristic of equipment fan filter unit(EFFU) installed inside of semiconductor process equipments, FPD manufacturing equipments and so on. Since EFFU is a combination of air filter and the assembly of fan, motor and frame, the integrity of these parts is very important for the performance of EFFU. So a conventional particle removal test method for air filters is not suitable for EFFU particle removal performance. This test method defines an evaluation method for EFFU which is installed inside an enclosed space to remove particles that are generated inside process equipment. The particle removal performance of EFFUs is usually depending on the performance of filter media and air flow rate. To understand a performance of an EFFU, the filter media characteristic, air flow rate and the integrity of EFFU parts should be considered simultaneously. This test method is intended to demonstrate the system performance of an EFFU and successfully evaluated EFFU performance characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.1028-1034
• /
• 2007

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권4호
• /
• pp.275-284
• /
• 2006

A test method for assessing service life of building materials and components based on performance degradation data is developed. The performance of a building material degrades as time goes by and the failure of the material is often defined as the point at which the performance of the material reaches a pre-specified degraded level. A performance-based test method is developed and a numerical example is provided to illustrate the use of the developed test method.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.738-744
• /
• 2018

Fuel failure due to debris is a major cause of failure in pressurized water reactors. Fuel vendors have developed various filtering devices to reduce debris-induced failure and have evaluated filtering performance with their own test facilities and methods. Because of the different test facilities and methods, it is difficult to compare filtering performances objectively. This study presents an improved filtering test and an efficiency calculation method to fairly compare fuel-filtering efficiency regardless of the vendor's filtering features. To enhance the reliability of our evaluation, we established requirements for the test method and had a facility constructed according to the requirements. This article describes the debris specimens, the amount of debris, and the replicates for the proposed test method. A calculation method of comprehensive debris-filtering efficiency using a weighted mean is proposed. The test method was verified by repeated tests, and the tests were carried out using the PLUS7 and 17ACE7 test fuels to calculate the comprehensive debris-filtering efficiencies. The evaluation results revealed that the filtering performance of PLUS7 is better than that of 17ACE7. The proposed method can be used on any kind of debris-filtering devices and is appropriate for use as a standard.

• 신재생에너지
• /
• 제7권4호
• /
• pp.42-49
• /
• 2011

The objective of this paper is to suggest a new method of a wind turbine performance test. The performance test of a wind turbine is generally carried out in a wind tunnel. The test needs not only a high-accuracy measuring system but also durable structure to withstand high speed turbine rotation and wind flow. Therefore, we tried turbine performance test using a towing tank to improve stability and reliability. Because a turbine rotates more slowly and generates more torque in the water than in the wind tunnel under similarity conditions. In this study, we developed turbine performance test systems and verified the turbine test method using a towing tank through comparing results of the wind tunnel and the towing tank test.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.767-775
• /
• 2018

To develop and check a Radar Processor Unit, checking the function and performance of the requirement is very important factor in developing Radar. General methods for verifying the Radar is simulation test, environment linkage test and field operation test, firstly, in case of requirement analysis phase, verify Radar algorithm and design by using mathematical method based simulation test method, and secondly, in case of unit test and integrated test phase, Test Equipment is set to simulate radar environment in the lab to verify radar function and performance. Lastly, field operation test phase is carried out to confirm the function and performance after it is mounted on the actual equipment. To successfully develop Radar Processor Unit, using the method of field operation test method after sufficient test cases are tested in radar environmental interlocking method in order to save cost and testing period and because of this reason, development of the Radar Processor Unit Test Equipment is becoming very important factor. In this paper, we introduce the concept of test equipment development and important factors in test equipment, which are target simulation, data processing and device interlocking.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.282-285
• /
• 1997

The torque efficiency of oil hydraulic pump is an important factor for it's performance characteristics. A study on the performance test method of oil hydraulic pump is based on test standard, but there is to be desired an study for double or tandem type oil hydraulic piston pump. So in this study present a test method on the tandem pump for torque efficiency and analysis method of the results.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제42권2호
• /
• pp.159-176
• /
• 2003

From the mid-1990s in Korea, performance assessment has been continuously emphasized in school mathematics and thus many researchers and teachers have been steadily studying this topic. But the concepts relevant to performance assessment and its purposes are very confusing because the mathematics educators' different views and voices are vary. As a result most mathematics teachers experience trouble in executing performance assessment properly and effectively in their math class. This unability for proper execution of performance assessment was once again revealed in this study which dealt with 15 articles on performance assessment. These 15 articles includes almost every article written on the topic of performance assessment that have been published in 4 domestic journals since December 1997. By examining this inability, it is required that its concepts and purposes should be organized with a common view and newly defined in the near future. Therefore, to successfully accomplish this, this paper outlines the basic problems on the understanding of performance assessment as follows: ㆍWhat is the relationship between performance assessment and alternative assessment\ulcorner ㆍWhat is the proper types(methods) of performance assessment\ulcorner ㆍIs the subject test a type of performance assessment\ulcorner ㆍWhat is the difference between subject test and essay test\ulcorner ㆍWhat is the relationship between performance assessment and performance tasks\ulcorner ㆍWhat is the relationship between performance tests and project method\ulcorner ㆍWhat is a project method\ulcorner ㆍIs it assessment standard or scoring standard to score a test result\ulcorner ㆍWhat is the difference between analytic scoring method and holistic scoring method?

• 대한전기학회논문지:전력기술부문A
• /
• 제50권6호
• /
• pp.287-292
• /
• 2001

This paper deals with the configuration, operating principles, systematic calculation method of parameter and optimization method of test circuit for parallel current injection method, series voltage injection method and hybrid synthetic test method as the method for performance test of circuit breaker with extra high interrupting capacity. The test method depicted above is applied to short-circuit making and breaking test (operating sequence :Os CdOs, Od-CdOs) and out-of-phase tests(operating sequence :Os, CdOs) for performance test of the newly-developed 420kV, 50kA and 800kV 50kV puffer-type gas circuit-breaker according to IEC 60056 and IEC 60427. The testing results, evaluation of equivalence for test and analyzed results are also presented in this paper.

• 디지털콘텐츠학회 논문지
• /
• 제19권4호
• /
• pp.801-808
• /
• 2018

유선 네트워크를 구성하는 스위치나 라우터 또는 통합망에 대한 성능 시험방법론에 대해서는 아직 명확히 정의 되어 있지 않다. 스마트 폰과 멀티미디어 트래픽으로 인해 네트워크의 속도는 100Gbps까지 빠르게 증가하고 있다. 그러나, 정형화된 시험 방법이 없고 성능 시험 관련 부분은 아직도 옛날 자료를 기반으로 시험을 수행하고 있다. 통신사업자나 기업에서는 요구사항에 대한 시험을 자체 BMT(Benchmark Test)로 진행하고 있으며, 정부 또는 공공기관에서는 외부 기관에 성능 시험을 의뢰하고 있다. 차세대 네트워크 장비를 포함한 단위장비 및 통합망에 대한 성능 시험 수요가 증가함에 따라 성능 시험 방법에 대한 분석이 조속히 이루어져야 한다. 따라서 본 논문에서는 기관에서 수행하는 성능 시험 방법을 분석하고 모든 유선 네트워크 장비에 적용할 수 있는 가이드라인을 제시하고자 한다.