• KEPCO Journal on Electric Power and Energy
• /
• 제3권2호
• /
• pp.89-97
• /
• 2017

The substation is a critical node in the power network where power is transformed in the power generation, transmission and distribution system. The IEC 61850 is a global standard which proposes efficient substation automation by defining interoperable communication and data modelling techniques. In order to achieve this level of interoperability and automation, the IEC 61850 (Part 6) defines System Configuration description Language (SCL). The SCL is an XML based file format for defining the abstract model of primary and secondary substation equipment, communications systems and also the relationship between them. It enables the interoperable exchange of data during substation engineering by standardizing the description of applications at different stages of the engineering process. To achieve the seamless interoperability, multi-vendor devices are required to adhere completely to the IEC 61850. This paper proposes an efficient algorithm required for verifying the interoperability of multi-vendor devices by checking the adherence of the SCL file to specifications of the standard. Our proposed SCL validation algorithm consists of schema validation and other functionalities including information model validation using UML data model, the Vendor Defined Extension model validation, the User Defined Rule validation and the IED Engineering Table (IET) consistency validation. It also integrates the standard UCAIUG (Utility Communication Architecture International Users Group) Procedure validation for quality assurance testing. Our proposed algorithm is not only flexible and efficient in terms of ensuring interoperable functionality of tested devices, it is also convenient for use by system integrators and test engineers.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권3호
• /
• pp.21-27
• /
• 2018

It is difficult to fabricate and maintain moving parts of expander at cryogenic temperature. This paper describes numerical analysis and experimental investigation on a cryogenic reciprocating expander without moving piston. An intake valve which takes high-pressure gas, and an exhaust valve which discharges low-pressure gas, are connected to a tube. The inside pressure of the tube is pulsated for work production. This geometric configuration is similar to that of pulse tube refrigerator but without regenerator. An orifice valve and a reservoir are installed to control the phase of the mass flow and the pressure. At the warm end, a heat exchanger rejects the heat which is converted from the produced work of the expanded gas. For the numerical analysis, mass conservation, energy conservation, and local mass function for valves are used as the governing equations. Before performing cryogenic experiments, we carried out the expander test at room temperature and compared the performance results with the numerical results. For cryogenic experiments, the gas is pre-cooled by liquid nitrogen, and then it enters the pulse tube expander. The experiments are controlled by the opening of the orifice valve. Numerical analysis also found the expander conditions that optimize the expander performance by changing the intake pressure and valve timing as well as the opening of the orifice valve. This paper discusses the experimental data and the numerical analysis results to understand the fundamental behavior of such a newly developed non-mechanical expander and elucidate its potential feature for cryogenic application.

• 항공우주기술
• /
• 제11권1호
• /
• pp.68-77
• /
• 2012

공기를 이용한 축소형 4 노즐 클러스터드 엔진 저부 유동에 대한 CFD 해석을 수행하여 수치 방법에 대한 비교와 저부 유동을 분석하였다. 해석결과 Roe나 AUSM의 공간 차분법에 따른 차이는 없었으며, Spalart-Allmaras 1 방정식 난류 모델이 SST k-${\omega}$ 모델이나 k-${\varepsilon}$ 모델에 비하여 본 연구에 비교적 적합한 것으로 나타났다. 클러스터드 엔진 저부 영역은 팽창된 노즐 플룸이 서로 만나면서 고압의 정체 영역을 일부 형성하며, 일부의 플룸이 저부 방향으로 역류 팽창하는 것이 관측된다. 저부로 팽창된 플룸은 노즐과 노즐 사이의 최소 공간으로 정의되는 "최소 배출면"을 통해 외기로 빠져 나가는 데 저부면에 가까울수록 더욱 빠른 속도로 빠져나가고 경험적 이론과 다르게 노즐과 노즐 사이의 공간 전체가 유동의 목을 형성하는 것이 아닌 것으로 확인된다. 또한 노즐 벽면 온도가 역류 플룸의 온도에 큰 영향을 끼치는 것을 확인하였다.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.86-92
• /
• 2014

In this paper, prediction of separation trajectory for Two-stage-To-Orbit space launch vehicle has been numerically simulated by using an aerodynamic database based on steady state analysis. Aerodynamic database were obtained for matrix of longitudinal and vertical positions. The steady flow simulations around the launch vehicle have been made by using a 3-D RANS flow solver based on unstructured meshes. For this purpose, a vertex-centered finite-volume method was adopted to discretize inviscid and viscous fluxes. Roe's finite difference splitting was utilized to discretize the inviscid fluxes, and the viscous fluxes were computed based on central differencing. To validate this flow solver, calculations were made for the wind-tunnel experiment model of the LGBB TSTO vehicle configuration on steady state conditions. Aerodynamic database was constructed by using flow simulations based on test matrix from the wind-tunnel experiment. ANN(Artificial Neural Network) was applied to construct interpolation function among aerodynamic variables. Separation trajectory for TSTO launch vehicle was predicted from 6-DOF equation of motion based on the interpolated function. The result of present separation trajectory calculation was compared with the trajectory using experimental database. The predicted results for the separation trajectory shows fair agreement with reference[4] solution.

• Composites Research
• /
• 제15권1호
• /
• pp.53-60
• /
• 2002

본 연구에서는 내열 특성과 구조적인 특성을 갖는 탄소섬유/페놀릭 복합재 내열튜브를 필라멘트와인딩 공법에 의해 제작하고 이들의 구조적인 성능을 평가하였다. 이를 위해 내열튜브의 제작방법을 소개하고 황산용해법을 적용하여 내열튜브에서의 섬유체적비와 기공함유율을 측정하였다. 시편폭을 달리한 인장시편의 기계적 특성을 평가함으로써 강화섬유의 연속성을 나타낼 수 있는 시편형상을 제시하였으며 공정변수를 달리한 내열튜브에서 채취된 인장시편의 기계적 특성을 평가함으로써 내열튜브의 제작을 위한 적절한 공정조건을 결정하였다. 그리고 보증시험을 통해 수집한 음향신호의 분석을 통해 내열튜브에서의 균열진전과 파손양상을 조사하였다. 마지막으로 내열튜브 자체에 대해 보증시험과 파열시험을 수행함으로써 내열튜브 자체의 구조적인 신뢰성을 확인하였다.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.318-327
• /
• 2006

Due to the diversified use of recent Piezoelectric Zirconate Titanate Composite Actuate. (PZTCA), various PZTCAs with the different ply orientation of the fiber layer have been applied. For this reason, the applicable bending moment equation is necessary even though the fiber layer ply orientation and the laminate configuration are changed. The aim of this research is to evaluate the relationship between the total effective moment $(M^E)$ and Bernoulli-Euler bending moment (M) when the ply orientations of UD CFRP are changed. In conclusions, firstly, as the performance test results by the CFRP ply orientation, the performance of [0] and [90] were stable. However, while the performance of [+45] was suddenly decreased after 5 hours. Secondly, the change of $(M^E)$ by the CFRP ply orientation was evaluated. As the CFRP ply orientation was increased from [0] to [+60], the $(M^E)$ were gradually decreased. However, they became a little bit increased from [+60] to [90]. Finally, after the change of M by the CFRP ply orientation was evaluated, it was found that $M^E=2.2M$ was valid for just [0] and that there was a relationship between $M^E$ and M according to the ply orientation.

• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.120-127
• /
• 2006

The fatigue behavior of LIPCA was so sensitive to the manufacturing condition, the environmental factors and the change of the test apparatus. Therefore, we could be considering not only the relationship between the stroke range $({\Delta}h)$ and actuating frequency but also the relationship between the stroke range $({\Delta}h)$ and the total effective moment $(M^E)$. Thus, this study proposed the calculation method of the applying $M^E$ when the $({\Delta}h)$ of LIPCA was increased from 1.mm to 20mm. To estimate the relationship between the total effective moment $(M^E)$ and the Bernoulli-Euler bending moment (M) was reviewed. And the residual stress distribution of LIPCA and THUNDER using the CLT was evaluated. In conclusions, converting the $({\Delta}h)$ of LIPCA to the radius of curvature (p) and calculating the $(M^E)$, it was found that the p by the $M^E$ changed similarly as the $({\Delta}h)$. It was found that the $M^E$ was 2.2 times as the M. While CFRP and PZT of LIPCA, which had the superior compressive characteristic, had the compressive residual stress, GFRP was subject to the tensile residual stress. Since this reversed configuration between the compressive residuals stress and the tensile one was made, the requirement of the stroke range $({\Delta}h)$ increase was satisfied.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.279-288
• /
• 2014

본 연구에서는 고공 환경 모사를 위하여 2차목 초음속 디퓨저를 Normal Shock Model를 이용하여 설계/제작하였다. 2차목 디퓨저의 주요 설계 변수인 2차목 디퓨저의 길이와 직경 변화에 따른 성능 특성을 고찰하기 위하여, 상온 고압 질소 가스를 이용하여 디퓨저 성능 실험을 수행하였다. 다양한 디퓨저 길이에 따른 실험 결과 2차목 디퓨저의 시동 특성은 디퓨저 입구 길이($L_d$)가 증가함에 따라 아주 미세하게 향상되었으나, 2차목 디퓨저 길이비($L_{st}/D_{st}$)와 확대부 길이($L_s$)의 증가에 따라서는 크게 향상되었다. 또한 다양한 디퓨저 직경 변화에 따른 실험 결과, 시동 압력과 진공 챔버 압력은 모두 이론 설계 면적비($A_d/A_{st}$) 근처에서 가장 우수한 성능을 보였다.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.745-757
• /
• 2018

The inclusion of a ductile steel bracing as means of repairing an earthquake-damaged bridge bent is evaluated and experimentally assessed for the purposes of restoring the damaged bent's strength and stiffness and further improving the energy dissipation capacity. The study is focused on substandard reinforced concrete multi-column bridge bents constructed in the 1950 to mid-1970 in the United States. These types of bents have numerous deficiencies making them susceptible to seismic damage. Large-scale experiments were used on a two-column reinforced concrete bent to impose considerable damage of the bent through increasing amplitude cyclic deformations. The damaged bent was then repaired by installing a ductile fuse steel brace in the form of a buckling-restrained brace in a diagonal configuration between the columns and using post-tensioned rods to strengthen the cap beam. The brace was secured to the bent using steel gusset plate brackets and post-installed adhesive anchors. The repaired bent was then subjected to increasing amplitude cyclic deformations to reassess the bent performance. A subassemblage test of a nominally identical steel brace was also conducted in an effort to quantify and isolate the ductile fuse behavior. The experimental data from these large-scale experiments were analyzed in terms of the hysteretic response, observed damage, internal member loads, as well as the overall stiffness and energy dissipation characteristics. The results of this study demonstrated the effectiveness of utilizing ductile steel bracing for restoring the bent and preventing further damage to the columns and cap beams while also improving the stiffness and energy dissipation characteristics.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.106-114
• /
• 2020

4차 산업혁명 시대의 핵심 인프라로 자리 매김하는 IP(Internet Protocol) 네트워크 시스템을 실제 구축, 시험 및 운영하면서 공부한 내용을 확인하고 이해하는 것은 네트워크 입문자들에게 매우 중요하다. IP 네트워크 시스템은 인터넷 계층 이하의 기능을 담당하는 IP 네트워크 자체와 DNS, DHCP, email 및 WWW로 기본적인 네트워크 서비스를 제공하는 기본 네트워크 시스템, 그리고 VoIP와 같은 응용 서비스 시스템으로 구성된다. 본 논문에서는 공개 소프트웨어 기반의 최소한의 네트워크 형상으로 IP 네트워크 시스템의 제반 기능을 실습해볼 수 있는 플랫폼을 제안하고, 실습 시나리오와 결과를 제시한다. 그리고 ns(network simulator)에 IP 주소 할당과 라우팅 테이블 관리 기능을 추가하여 테이블 기반 데이터그램 라우팅 기법을 사전 학습할 수 있도록 하였다. 본 연구에서 제안된 실습 플랫폼으로 별도의 장비와 비용 부담 없이 개인용 컴퓨터에서 간편하게 실습을 수행할 수 있어 네트워크 입문자에게 유용하리라 기대된다.