• 제목/요약/키워드: Test cases

검색결과 4,753건 처리시간 0.031초

한국 남해안 일대의 해수 및 해산물에서 Vibrio vulnificus의 분리연구 (Studies on the Isolation of Vibrio vulnificus from Sea Water and Marine Products in the Southern Sea of Korea)

  • 주진우;김일
    • 대한미생물학회지
    • /
    • 제21권1호
    • /
    • pp.97-106
    • /
    • 1986
  • Authors studies on the isolation of V. vulnificus from sea water, sea mud fishes, shellfishes and algae at the seasides of Pusan, Masan, Chungmu and Ulsan in Korea in 1985. Authors carried out test for isolated strains to bacteriological test, hemolysis test about erythrocytes of various animal, sensitivity test of various chemotherapeutic agents and serological test with antiserum of V. vulnificus. The resultls obtained were as follows: 1. V. vulnificus was isolated 15 strains from 399 total specimens: 110 cases of sea water, 40 cases of sea mud, 90 cases of fishes, 60 cases of shellfishes and 79 cases of various algae, respectively. 2. Nine strains were isolalted from sea water, 4 strains were isolated from sea mud and 2 strains were isolated from fishes, respectively. 3. Two strains among 15 strains isolated were lactose positive reaction. 4. All strains isolated were grown in concentration of $0.5%{\sim}7.0%$ NaCl, but were not grown 0% and 8.0% NaCl. 5. Hemolysis reaction about various erythrocytes was sensitived to guinea pig, human and rabbit erythrocytes, but was not sensitived to sheep erythrocytes. 6. Sensitivity test using with chemotherapeutic agents of "BioLab" Microbial Sensitivity Test Discs were generally sensitived to amikacin, ampicillin, clindamycin, erythromycin, gentamycin, kanamycin, streptomycin, tetracyclin and tobramycin, and were moderate to penicillin, but were resistant to methicillin and lincomycin, respectively. 7. The distribution of serotypes of V. vulnificus isolated were on antiserum of $0.1{\sim}07$ of V. vulnificus: 1 case of 01 and 2 cases of 07, respectively.

  • PDF

탄소섬유로 강화된 반응소결 SiC 제조 및 Erosion 특성 (Preparation and Erosion Properties of Reaction-Bonded SiC Reinforced by Carbon Fiber)

  • 송진웅;임대순;김형욱
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1998년도 제28회 추계학술대회
    • /
    • pp.258-264
    • /
    • 1998
  • Three kinds of reation-bonded SiC that reaction-bonded SiC(RBSC), RBSC reinforced by carbon fiber and RBSC reinforced by activated carbon fiber were prepared for investigating the change of erosion properties. The characteristics of microstructures and the phases have been investigated by using scanning electron microscope and XRD analysis. The hardness test, toughness test and erosion test were camed out. In the cases with no carbon fiber, those kind of specimens had the highest result of hardness test and the lowest result of toughness test. With the increase of carbon fiber content, The hardness and the weight loss were decreased but the toughness was increased in the cases with carbon fiber In the cases with activated carbon fiber those specimens had the highest result of toughness test and the lowest result of hardness test with 30% contents of activated carbon fiber.

  • PDF

비강(鼻腔)에서 분리(分離)한 황색포도구균(黃色葡萄球菌)의 생화학적(生化學的) 성상(性狀)에 관(關)한 연구(硏究) (Studies on the Pathogenic Staphylococci aureus from Nasal Cavity)

  • 주진우
    • 대한미생물학회지
    • /
    • 제17권1호
    • /
    • pp.67-74
    • /
    • 1982
  • 비병원근무자(非病院勤務者)인 부산대학교(釜山大學校) 자연과학대학(自然科學大學) 생물학계열(生物學系列) 18명(名), 미생물학과(微生物學科) 2학년(學年) 31명(名), 미생물학과(微生物學科) 3학년(學年) 37명(名)과 병원근무자(病院勤務者)인 간호과학생(看護科學生) 30명(名), 간호원(看護員) 30명(名), 수술근무간호원(手術勤務看護員) 30명(名), 의사(醫師) 30명(名), 총(總) 256명(名)을 대상(對象)으로 하여 비강(鼻腔)에서 황색포도구균(黃色葡萄球菌)을 분리(分離)하여 얻은 성적(成績)은 다음과 같다. 1. 비병원근무자(非病院勤務者) 대학생(大學生)에서 황색포도구균분리율(黃色葡萄球菌分離率)은 49예(例)(29.7%), 병원근무자(病院勤務者)에서는 67예(例)(55.8%)이었다. 2. 비병원근무자(非病院勤務者) 대학생(大學生)의 비강(鼻腔)에서 분리(分離)한 황색포도구균(黃色葡萄球菌)의 40예(例)에서 coagulase 양성균주(陽性菌株) 29예(例)(72.5%), 음성균주(陰性菌株) 11예(例)(27.5%)이고, mannitol 분해(分解) 양성균주(陽性菌株) 29예(例)(72.5%), 음성균주(陰性菌株) 11예(例)(27.5%)이었다. 3. 병원근무자(病院勤務者)의 비강(鼻腔)에서 분리(分離)한 황색포도구균(黃色葡萄球菌)의 67예(例)에서 coagulase 양성균주(陽性菌株) 59예(例)(58.1%), 음성균주(陰性菌株) 8예(例)(11.9%)이고, mannitol 분해양성균주(分解陽性菌株) 49예(例)(73.1%), 음성균주(陰性菌株) 18예(例)(26.9%)이었다. 4. 분리균주중(分離菌株中)에서 coagulase양성(陽性) 및 mannitol분해양성(分解陽性) 49균주(菌株)에 대(對)한 용혈반응(溶血反應)의 감수성(感受性)의 순위(順位)는 가토(家兎) 40예(例)(81.6%), 모르못트 25예(例)(53.5%), 면양(緬羊) 13예(例)(26.5%)이고, 닭 및 사람의 적혈구(赤血球)에는 용혈반응음성(溶血反應陰性)이었다. 5. 분리균주중(分離菌株中)에서 coagulase양성(陽性) 및 mannitol분해양성(分解陽性) 49균주(菌株)에 대(對)한 용혈반응(溶血反應)은 전주(全株)에 대(對)해서 각각(各各) 음성(陰性)이었다. 6. 화학요법제(化學療法劑)에 대(對)한 분리균주(分離菌株)에 대(對)한 성적(成績)은 비병원근무자(非病院勤務者) 분리균주(分離菌株)는 대부분(大部分) 감수성(感愛性)이 있으나 병원근무자(病院勤務者) 분리균주(分離菌株)는 대부분(大部分) 저항성(抵抗性)을 나타냄을 관찰(觀察)할 수 있었다.

  • PDF

Assessment of the proximity between the mandibular third molar and inferior alveolar canal using preoperative 3D-CT to prevent inferior alveolar nerve damage

  • Lee, Byeongmin;Park, Youngju;Ahn, Janghoon;Chun, Jihyun;Park, Suhyun;Kim, Minjin;Jo, Youngserk;Ahn, Somi;Kim, Beulha;Choi, Sungbae
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제37권
    • /
    • pp.30.1-30.7
    • /
    • 2015
  • Background: The inferior alveolar nerve (IAN) may be injured during extraction of the mandibular third molar, causing severe postoperative complications. Many methods have been described for evaluating the relative position between the mandibular third molar and the inferior alveolar canal (IAC) on panoramic radiography and computed tomography, but conventional radiography provides limited information on the proximity of these two structures. The present study assessed the benefits of three-dimensional computed tomography (3D-CT) prior to surgical extraction of the mandibular third molar, to prevent IAN damage. Methods: This retrospective study included 4917 extractions in 3555 patients who presented for extraction of the mandibular third molars. The cases were classified into three groups, according to anatomical relationship between the mandibular third molars and the IAC on panoramic radiography and whether 3D-CT was performed. Symptoms of IAN damage were assessed using the touch-recognition test. Data were compared using the chi-square test and Fisher's exact test. Results: Among the 32 cases of IAN damage, 6 cases were included in group I (0.35 %, n = 1735 cases), 23 cases in group II (1.1 %, n = 2063 cases), and 3 cases in group III (0.27 %, n = 1119 cases). The chi-square test showed a significant difference in the incidence of IAN damage between groups I and II. No significant difference was observed between groups I and III using Fisher's exact test. In the 6 cases of IAN damage in group I, the mandibular third molar roots were located lingual relative to the IAC in 3 cases and middle relative to the IAC in 3 cases. The overlap was ${\geq}2mm$ in 3 of 6 cases and 0-2 mm in the remaining 3 cases. The mean distance between the mandibular third molar and IAC was 2.2 mm, the maximum distance 12 mm, and the minimum distance 0.5 mm. Greater than 80 % recovery was observed in 15 of 32 (46.8 %) cases of IAN damage. Conclusions: 3D-CT may be a useful tool for assessing the three-dimensional anatomical relationship and proximity between the mandibular third molar and IAC in order to prevent IAN damage during extraction of mandibular third molars.

임상적 방법을 이용한 내부연결 임플랜트에서 고정체수준 인상법의 정확도 평가 (EVALUATION OF THE ACCURACY OF FIXTURE-LEVEL IMPRESSION TECHNIQUE FOR INTERNAL CONNECTION IMPLANT USING CLINICAL METHODS)

  • 최정한
    • 대한치과보철학회지
    • /
    • 제44권4호
    • /
    • pp.421-431
    • /
    • 2006
  • Statement of problem : Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression technique in internal connection implant system. Purpose: This study evaluated the accuracy of splinted fixture-level impression technique using clinical methods and the effect of internal hex on fit of superstructure in internal connection implant system (Astra Tech). Material and method : Two metal master frameworks made from two abutments (Cast-to Abutment ST) each for parallel and divergent conditions and a corresponding. passively fitting, dental stone master cast with four future replicas (Fixture Replica ST) were fabricated. Ten dental stone casts were made with vinyl polysiloxane impressions from the master cast by acrylic resin splinted fixture-level impression technique. To evaluate the accuracy of impression technique, the fit of master frameworks for test models was evaluated using screw resistance test (SRT) and one-screw test. The results of SRT were recorded as SRT values from grade 1 to grade 5 by 1/4 turn. And to evaluate the effect of hex on fit of superstructure, the same tests were performed after removing hexes of master frameworks. Results: 1. There was only one case (2.5%) showing SRT value of test model below ade 2 in total before and after removing hexes of master frameworks. And, by removing hexes. SRT values decreased in only one test model (5%) and did not change in 17 test models (85%). 2. SRT values of the 1$^{st}$ screws were grade 2 in 80% of cases before, and grade 1 in 80% of cases after removing hexes. And, by removing hexes, SRT values decreased in 72.5% of cases. 3. SRT values of the 2$^{nd}$ screws were grade 3 in 85% of cases before, and grade 3 in 95% of cases after removing hexes. And, by removing hexes, SRT values did not change in 85% of cases. 4. There were only 2 cases regarded as acceptable fit by one-screw test, and SRT values of 2$^{nd}$ screws of both cases were grade 2. Conclusion. Within the limitations of this study, future-level impression of internal connection implant system is considered to obtain inaccurate working cast, even using acrylic resin splinted impression technique. And, it is considered to be unable improve the fit to remove the hexes of implant restoration.

소프트웨어 테스트 모니터링 프레임워크 구축 방안 (Construction Method of Software Test Monitoring Framework)

  • 서용진;김수지;김현수
    • 인터넷정보학회논문지
    • /
    • 제17권6호
    • /
    • pp.61-69
    • /
    • 2016
  • 테스팅은 시스템의 요구사항을 바탕으로 테스트 케이스를 생성하여 소프트웨어에 내재되어 있는 결함을 발견하는 활동이다. 테스팅을 효과적으로 수행하기 위해서는 충실한 테스트 계획, 잘 작성된 테스트 케이스 생성과 더불어 체계적인 테스트 모니터링 활동이 요구된다. 테스트 자동화 방법에 대한 대부분의 연구들은 테스트 케이스 생성에서 테스트 실행까지의 자동화 방법에 초점이 맞춰져 있다. 본 연구에서는 이와 달리 테스트 모니터링의 자동화 방안에 대하여 연구한다. 이를 위해 테스트 모니터링 자동화를 위해 해결해야 할 요소를 도출하고 이를 기반으로 테스트 모니터링 자동화 프레임워크의 구축 방안을 제시한다.

Microbiological Contamination and Sanitary Management of Aquarium Water in the Busan Area

  • Cho, Kyung-Soon
    • 대한임상검사과학회지
    • /
    • 제46권1호
    • /
    • pp.1-11
    • /
    • 2014
  • This research has been performed by our own investigation, also cooperated with Health and Sanification Division and each of district offices in Busan metropolitan city. After choosing, we collected water samples five times for microbiological examination. As a result of investigating in 160 water samples from urban areas, we could detect 88 cases of Vibrio spp. Furthermore, there were four cases exceeding the acceptable limit of aquarium water (100,00/mL) and another four cases exceeding the limit of Coliform group (1,000 below/100 mL). As a result of investigating that we performed for 271 cases of water samples from coastal areas from April to November, we could detect 130 cases of vibrio species and 10 cases of Coliform group. After performing 17 kinds of antibiotic susceptibility test for 41 cases of isolated Vibrio parahaemolyticus, 27 cases showed tolerance to Amplicllin (AM), all of 31 cases showed intermediate resistance only to Cefazolin (CF) but had sensitivity to the rest of them. As a result of performing antibiotic susceptibility test, serum test and PFGE gene analysis on each 10 pair of Vibrio parahaemolyticus detected concurrently from intake-pipe water and, aquarium water, we couldn't get data showing that they are clearly same species in three kinds of test. In addition, UV sterilization, Ozonization and so on. Based on our research, intake pipe didn't have a problem with microbiological contamination so we are sure that the germ came from supplied fish had caused that kind of contamination. For effective management, UV sterilization or Ozonization which can be handled consistently should be adopted in aquarium.

폐 Aspergollosis의 외과적 치료[제 2보] (Surgical Treatment of Pulmonary Aspergillosis[II])

  • 차경태
    • Journal of Chest Surgery
    • /
    • 제25권11호
    • /
    • pp.1292-1298
    • /
    • 1992
  • This investigation is designed to illustrate the clinical features '||'&'||' preoperative diagnosis, surgical role in the management of pulmonary aspergilloma, '||'&'||' compare with the previous study. We reviewed 42 cases of surgically treated pulmonary aspergillosis from Jan. 1984 to July 1992. The peak age incidence laid in the 2nd '||'&'||' 3rd decade of 25 cases[59.5%]. The 41 cases[97.6%] had a history of treatment with anti-tuberculous drugs under impression of pulmonary tuberculosis. The most common complaint was hemoptysis in 28 cases[66.7%]. The 21 cases showed so called "Air-meniscus sign" on the preoperative chest X-ray. As a preoperative diagnostic modality, the positivity was 30.0%, 57.8%, 88.5% on the fungus culture of sputum for Aspergillus, Chest CT, serum immunodiffusion test for A. fumigatus, respectively. The 37 cases[88.1%] can be diagnosed as pulmonary aspergillosis pre-operatively by any diagnostic method. The anatomical location of aspergilloma was mainly upper lobe in 17 cases[40.5%] '||'&'||' the majority of cases were managed by lobectomy. The postoperative pathologic findings showed that 18 cases[41.0%] were combined with tuberculosis '||'&'||' 15 cases[34.1%] were not combined with any other disease[Pr imary Aspergillosis]. The 6 cases showed postoperative empyema including 4 cases of bronchopleural fistula, 3 cases showed postoperative bleeding. One case was died postoperatively due to respiratory failure. In conclusion, when the patient who has longstanding history fo pulmonary tuberculosis '||'&'||' hemoptysis, must be suspected fungal super infection. The resectional surgery is the treatment of choice for symptomatic localized disease. And compare with the previous study, preop. chest CT '||'&'||' immunodiffusion test were more commonly available '||'&'||' showed high positivity.

  • PDF

An Intelligent Framework for Test Case Prioritization Using Evolutionary Algorithm

  • Dobuneh, Mojtaba Raeisi Nejad;Jawawi, Dayang N.A.
    • 인터넷정보학회논문지
    • /
    • 제17권5호
    • /
    • pp.89-95
    • /
    • 2016
  • In a software testing domain, test case prioritization techniques improve the performance of regression testing, and arrange test cases in such a way that maximum available faults be detected in a shorter time. User-sessions and cookies are unique features of web applications that are useful in regression testing because they have precious information about the application state before and after making changes to software code. This approach is in fact a user-session based technique. The user session will collect from the database on the server side, and test cases are released by the small change configuration of a user session data. The main challenges are the effectiveness of Average Percentage Fault Detection rate (APFD) and time constraint in the existing techniques, so in this paper developed an intelligent framework which has three new techniques use to manage and put test cases in group by applying useful criteria for test case prioritization in web application regression testing. In dynamic weighting approach the hybrid criteria which set the initial weight to each criterion determines optimal weight of combination criteria by evolutionary algorithms. The weight of each criterion is based on the effectiveness of finding faults in the application. In this research the priority is given to test cases that are performed based on most common http requests in pages, the length of http request chains, and the dependency of http requests. To verify the new technique some fault has been seeded in subject application, then applying the prioritization criteria on test cases for comparing the effectiveness of APFD rate with existing techniques.

Pair-wise 기법을 활용한 스마트 셋톱박스 Wi-Fi 방향성 테스트의 간소화 방법 (Wi-Fi Directional Test Simplification for Smart Set-Top Box Based on Pair-Wise Testing)

  • 이재철;김윤
    • 한국컴퓨터정보학회논문지
    • /
    • 제20권3호
    • /
    • pp.1-8
    • /
    • 2015
  • 근래 각 가정에서 많이 사용되는 Wi-Fi 기술이 적용된 안드로이드 OS 기반의 스마트 셋톱박스는 사용자의 다양한 설치 환경에 관계없이 Wi-Fi를 이용한 서비스에 문제가 없음을 보장해야 한다. Wi-Fi의 무지향성에 대한 방향성 테스트 방법은 표준으로 정해지지 않아 각 개발업체에서는 자체적으로 테스트 방법을 고안하여 테스트를 진행한다. 본 논문에서는 Wi-Fi 기능의 무지향성을 확인하기 위해 업로드와 다운로드의 2개 요소, 무선 라우터를 바라보는 수직 각도의 10개 요소와 수평 각도의 36개 요소를 고려하여 720개의 테스트 케이스를 생성하였다. 현실적으로 비용과 시간문제로 인해 모든 테스트 케이스를 테스트하기에 어려움이 따르므로, ISO/IEC 29119-4의 조합 테스팅 기법 중 하나인 Pair-wise 기법으로 테스트 요소를 조합하였다. 또한, Allpairs 도구를 이용하여 Pair-wise 기법이 적용된 테스트 케이스를 얻어냈고 테스트를 진행하였다. 제안하는 방법을 사용하면 기존의 테스트 케이스를 진행하는데 소요되는 시간 대비 48.61%가 단축됨을 확인할 수 있었으며, 간소화된 테스트 케이스의 결과만을 가지고도 문제가 발생하는 부위에 대한 추적이 가능함을 확인할 수 있었다.