• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 요약집 춘계학술발표대회
• /
• pp.225.2-225.2
• /
• 2004

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.239-240
• /
• 2005

• 한국컴퓨터정보학회논문지
• /
• 제27권5호
• /
• pp.101-107
• /
• 2022

모델링 및 시뮬레이션은 목표 시스템의 동작 검증, 성능 분석, 운용 최적화, 예측을 위해 사용되는 기술이다. 이 기술의 대표적인 이산사건 시스템 명세(DEVS)는 모델들을 엄격한 형식론으로 정의하고 모델 간의 구조를 계층화한다. 이 DEVS 모델들의 원자 모델은 목표와 다른 의도로 동작하게 될 경우 시뮬레이션은 잘못된 의사결정으로 이어질 수 있다. 그럼에도 대부분 DEVS 시스템은 모델 테스트의 부재 또는 수동 테스트 환경으로 제공하여 개발자가 모델을 검증하는 데 오랜 시간이 소비된다. 본 논문에서는 파이썬 기반 DEVS에서 정확하고 빠른 원자 모델의 검증을 위해 스크립트 기반 테스트 시스템을 제안한다. 제안 테스트 시스템은 기존 방식인 수동 테스트와 새로운 방식인 스크립트 기반 테스트를 둘 다 사용한다. 우리 시스템의 실험 결과, 제안 테스트 방식은 스크립트를 10번 연속 실행 시 24ms 이내에 실행되었다. 그리하여 제안 시스템은 스크립트 기반 테스트를 사용해서 빠른 원자 모델 검증 시간을 보장하고, 테스트 스크립트의 재사용성을 향상한다.

• 약학회지
• /
• 제55권1호
• /
• pp.64-68
• /
• 2011

In this study, a high performance liquid chromatography-diode array detector method was established, for simultaneous determination of three compounds, berberine, palmatine and geniposide in Hwangryunhaedok-tang, To develop and validate method, $C_{18}$ column (5 ${\mu}M$, 4.6 mm${\times}$250 mm) was used with gradient mobile phase, water containing 0.1% trifluoroacetic acid (TFA) and MeOH at the column temperature of $30^{\circ}C$. UV wavelength was set at 230 and 280 nm. Validation of the chromatography method was evaluated by linearity, precision and accuracy test. Calibration curve of standard components showed good linearity ($R^2$ > 0.9999). The limits of detection (LOD) and limits of quantification (LOQ) varied from 0.05 to 0.17 ${\mu}g/ml$ and 0.15 to 0.53 ${\mu}g/ml$, respectively. The relative standard deviations (RSDs) data of intra-day and inter-day test were in less than 2.99% and 1.90%, respectively. The results of the accuracy test were in the range of 98.36 to 102.52% with RSDs values 0.32 to 1.98%. The results of validation indicated that this method was a very accurate and sensitive assay.

• Korean Journal of Radiology
• /
• 제19권6호
• /
• pp.1021-1030
• /
• 2018

Objective: We evaluated the effect of various patient characteristics and time-density curve (TDC)-factors on the test bolus-affected vessel enhancement on coronary computed tomography angiography (CCTA). We also assessed the value of generalized linear regression models (GLMs) for predicting enhancement on CCTA. Materials and Methods: We performed univariate and multivariate regression analysis to evaluate the effect of patient characteristics and to compare contrast enhancement per gram of iodine on test bolus (${\Delta}HUTEST$) and CCTA (${\Delta}HUCCTA$). We developed GLMs to predict ${\Delta}HUCCTA$. GLMs including independent variables were validated with 6-fold cross-validation using the correlation coefficient and Bland-Altman analysis. Results: In multivariate analysis, only total body weight (TBW) and ${\Delta}HUTEST$ maintained their independent predictive value (p < 0.001). In validation analysis, the highest correlation coefficient between ${\Delta}HUCCTA$ and the prediction values was seen in the GLM (r = 0.75), followed by TDC (r = 0.69) and TBW (r = 0.62). The lowest Bland-Altman limit of agreement was observed with GLM-3 (mean difference, $-0.0{\pm}5.1$ Hounsfield units/grams of iodine [HU/gI]; 95% confidence interval [CI], -10.1, 10.1), followed by ${\Delta}HUCCTA$ ($-0.0{\pm}5.9HU/gI$; 95% CI, -11.9, 11.9) and TBW ($1.1{\pm}6.2HU/gI$; 95% CI, -11.2, 13.4). Conclusion: We demonstrated that the patient's TBW and ${\Delta}HUTEST$ significantly affected contrast enhancement on CCTA images and that the combined use of clinical information and test bolus results is useful for predicting aortic enhancement.

• 항공우주기술
• /
• 제13권2호
• /
• pp.142-149
• /
• 2014

저궤도위성은 발사 이후 초기 운영[1] 및 검보정 단계를 거쳐 정상 운영 단계로 진입한다. 정상 운영 단계에서는 이상 현상에 대한 대응조치[2], 궤도조정 작업 이외의 대부분 기간 동안 지상국으로부터 임무 명령을 수신하고 영상 촬영 및 전송 임무를 수행하게 된다. 저궤도위성과 지상국 시스템이 모두 관여된 임무수행능력은 저궤도위성 프로그램 성공 판단의 핵심 지표이고, 저궤도위성 프로그램 추진 목적과 일치하는 항목이기 때문에 지상 시험 단계에서 철저한 검증을 통해 신뢰성을 확보해야 한다. 지상 시험단계에서 지상국과 위성의 역할을 검증함으로써 임무수행능력에 대한 신뢰성을 확보하기 위해서는 저궤도위성의 실제 운용 상황과 유사한 시나리오를 작성하고 이를 바탕으로 명령을 생성하여 위성에 전달하며, 영상과 건강상태 텔레메트리(Telemetry) 데이터를 수신하는 등의 임무수행 전체 주기에 대한 검증이 필요하다. 이 논문은 저궤도위성과 지상국간 접속 환경을 활용해 수행된 임무수행능력 지상 검증 시험 설계 및 수행 결과에 대해 다룬다. 시험 설계시 고려되어야 할 항목과 이를 바탕으로 설계된 시험에 대해 상세히 서술하고 결과에 대해 정리하였다.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.457-464
• /
• 2011

This paper deal with the validation of correction method of ice strength and thickness to the sea trial condition based on the ice model test results. It is very difficult to conduct the model test corresponding to the sea trial condition exactly. In addition, the available sea trial data is not sufficient for the validation of correction method. In the present study, the model test results of Terry-Fox ice breker have been used to compare the corrected results of sea trial test by varying its thickness and strength of model ice. The HSVA and ITTC methods have been applied to the present comparisions and the required power has been also validated by using the HSVA method. There are rather good agreement between the sea trial result and model test corrected by the HSVA and ITTC method. The more comparisons are expected to be carried out in near future.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.550-559
• /
• 2014

Hydraulic performance of the 1 inch ball valve have been analyzed based on the three-dimensional Reynolds-averaged Navier-Stokes analysis and an experiment. The experimental test rig of the 1 inch ball valve has been developed to investigate pressure drop for the 1 inch ball valve. The numerical model, which has reliability and effectiveness, has been constructed through the grid dependency test and validation with the results of the experiment. Shear stress transport turbulence model has been used to enhance an accuracy of the turbulence prediction in the pipeline and ball valve, respectively. Effects of the ball valve angle on the flow characteristics and friction performance have been evaluated.

• 대한간호학회지
• /
• 제45권4호
• /
• pp.613-624
• /
• 2015

Purpose: The purpose of this study was to develop a scale to evaluate empowerment in woman with breast cancer and to examine the validity and reliability of the scale. Methods: The development process for the initial items included a literature review, interviews, and construction of a conceptual framework. The identified items were evaluated for content validity by experts, resulting in 3 factors and 48 preliminary items. Participants were 319 women with breast cancer recruited to test reliability and validity of the preliminary scale. Data were analyzed using item analysis, confirmatory factor analysis, criterion related validity, internal consistency and test-retest reliability. Results: The final scale consisted of 30 items and 3 factors. Factors, including 'intrapersonal factor' (14 items), 'interactional factor' (8 items), and 'behavioral factor' (8 items), were drawn up after confirmatory factor analysis. Goodness of fit of the final research model was very appropriate as shown by ${\chi}^2/df=1.86$, TLI=.90, CFI=.92, SRMR=.06, and RMSEA=.05. Criterion validity was evaluated by total correlation with the Cancer Empowerment Questionnaire .78. Cronbach's alpha for total items was .93 and test-retest reliability was .69. Conclusion: Findings from this study indicate that the scale can be used in the development of nursing interventions to promote the empowerment of women having breast cancer.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.175-181
• /
• 2015

In this paper, the neuromuscular electrical stimulation medical devices for non-implantable incontinence treatment other than vaginal insertion type was developed and commercialized. The structure of medical devices for electrical stimulation based on the anatomy of the pelvic floor muscle designed. Then, the optimum parameters that may be effective in pelvic floor muscle electrical stimulation was set. The circuit system based on the optimum parameters were designed and manufactured. The frequency of the pulse voltage for electrical stimulation is 75[Hz], the pulse width is 300[${\mu}s$], the development of medical devices was to have seven program functions to the various treatments. The circuit system of medical devices was composed of microcontroller, comparator and converter. The performance of the developed circuit system in KTC(Korea Testing Certification) were carried out medical equipment inspection test. Test results, test specifications were satisfied with the medical device, the performance was verified to be commercialized as a medical device. The development of medical devices were validated risk assessment and product performance through a software validation. Commercialization of medical equipment was acquired to enable the certification standards of the international standard IEC 60601-1.