• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.394-399
• /
• 2012

최근 MEMS 센서는 기계상태감시에 있어서 전력소모, 크기, 비용, 이동성, 응용 등에 있어서 각광을 받고 있다. 특히, MEMS 센서는 스마트센서와 통합가능하고, 대량생산이 가능하여 가격이 저렴하다는 장점이 있다. 이와 관련한 기계상태감시를 위한 많은 실험적 연구가 수행되고 있다. 이 논문은 MEMS 센서들을 3 가지 인공지능 분류기 성능평가를 위한 비교연구에 대해 설명하고 있다. 회전기계에 MEMS 가속도와 전류센서들을 부착하여 데이터를 취득했고, 특징추출과 파라미터 최적화를 위해 Cross validation 기법을 사용하였다. MEMS 센서를 이용한 결함분류기 적용은 적합하다고 판단된다.

• 한국물환경학회지
• /
• 제31권5호
• /
• pp.507-522
• /
• 2015

In this study, some of the model verification results of STREAM (Spatio-Temporal River-basin Ecohydrology Analysis Model), a newly-developed hybrid watershed model, are presented for the runoff processes of nonpoint source pollution. For verification study of STREAM, the model was applied to a test watershed and a sensitivity analysis was also carried out for selected parameters. STREAM was applied to the Mankyung River Watershed to review the applicability of the model in the course of model calibration and validation against the stream flow discharge, suspended sediment discharge and some water quality items (TOC, TN, TP) measured at the watershed outlet. The model setup, simulation and data I/O modules worked as designed and both of the calibration and validation results showed good agreement between the simulated and the measured data sets: NSE over 0.7 and $R^2$ greater than 0.8. The simulation results also include the spatial distribution of runoff processes and watershed mass balance at the watershed scale. Additionally, the irrigation process of the model was examined in detail at reservoirs and paddy fields.

• Computers and Concrete
• /
• 제23권1호
• /
• pp.11-23
• /
• 2019

Nowadays, the characterization of Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC) tensile behavior still remains a challenge for researchers. For this purpose, a simplified closed-form non-linear hinge model based on the Third Point Bending Test (ThirdPBT) was developed by the authors. This model has been used as the basis of a simplified inverse analysis methodology to derive the tensile material properties from load-deflection response obtained from ThirdPBT experimental tests. In this paper, a non-linear finite element model (FEM) is presented with the objective of validate the closed-form non-linear hinge model. The state determination of the closed-form model is straightforward, which facilitates further inverse analysis methodologies to derive the tensile properties of UHPFRC. The accuracy of the closed-form non-linear hinge model is validated by a robust non-linear FEM analysis and a set of 15 Third-Point Bending tests with variable depths and a constant slenderness ratio of 4.5. The numerical validation shows excellent results in terms of load-deflection response, bending curvatures and average longitudinal strains when resorting to the discrete crack approach.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.104-119
• /
• 2022

Life safety awareness level diagnosis is necessary for customized safety education and continuous safety awareness. As the starting stage of safety education for each life cycle, a scale that has verified the reliability and validity of high school students' life safety awareness has not yet been developed. In this context, the purpose of this study is to develop and validate the life safety awareness scale of high school students and to analyze interindividual differences. Questionnaire data was collected from April to June 2022 from 834 students in the first, second, and third grades of high schools in △△ city in Jeollabuk-do. A final 25-item scale was developed using the preliminary survey, preliminary test, the main test, descriptive statistical analysis, and exploratory and confirmatory factor analysis. This scale consists of four sub-factors: 'safety prevention', 'safety knowledge', 'safety preparation', and 'safety protection'. Good reliability and validity were verified by analysis of content validity and construct validity. The generalizability of the scale was verified by crossover validation between the search group and the crossover group. Based on the interindividual differences analysis, although there was a difference between genders in life safety awareness, there was no difference by grade level and academic achievement. This study is significant in developing the first valid scale that can measure high school students' life safety awareness and providing the necessity and rationale for life safety education by life cycle considering individual gender differences.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2583-2588
• /
• 2009

본 논문에서는 반정현파 형태의 충격을 받는 HDD에 대한 충격해석을 수행하고, 그 타당성을 실험적으로 검증하였다. 일반적으로 센서를 이용한 제품의 충격실험을 통해서는 제한적인 정보만을 얻을 수 있지만, 컴퓨터를 이용한 해석기술은 제품의 파손현상을 규명하는데 필요한 보다 광범위하고 상세한 정보를 제공할 수 있는 장점을 가진다. 하지만, 이러한 해석결과는 여러 요인들에 따라 매우 민감하기 때문에 그 타당성을 검증하는 것이 중요하다. 따라서 본 연구에서는 200G/1ms의 전자기 충격실험과 300G/2ms의 낙하충격실험을 통하여 HDD의 조립단계별로 LS-DYNA를 이용한 유한요소해석의 신뢰성을 검증하였다.

• 한국안전학회지
• /
• 제28권1호
• /
• pp.18-23
• /
• 2013

The purpose of this study were to develop and validate a prototype slipmeter used on-site floor. The developed slipmeter was dreg sled type. It measured static coefficient of friction(SCOF). The developed slipmeter was evaluated with ASTM 2508-11 which use four different standard surfaces(polished granite, glazed porcelain, vinyl composite tile, and ceramic tile). The SCOF was then measured with developed slipmeter under the three different contaminants and seven different floors. The test results of slipmeter were also compared with those of BOT-3000, floor surface roughness, and human perception. The test results revealed that developed slipmeter successfully ranked all four standard surfaces and differentiated among standard surfaces with varying degrees of slipperiness. The developed slipmeter couldn't properly measure slipperiness under the two kind of floors(polished tile, ground steel plate) and one kind of contaminant(glycerol). The test results of developed slipmeter had stronger correlation with those of BOT-3000 and floor roughness under the water and detergent solution than under the glycerol. The test results of developed slipmeter also showed stronger correlation with those of BOT-3000 and surface roughness than those of human perception. The newly developed slipmeter had been found to give consistent results under the test conditions except for two kind of floors(polished tile, ground steel plate) and one kind of contaminant(glycerol).

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.55-60
• /
• 2022

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.462-467
• /
• 2003

According to the computerization of railway signalling system, necessity of communication protocol for interface between these equipments is increasing. Therefore the research on communication protocol structure that is required according to computerization trend of these signalling goes. In our research the existed protocol currently used was analyzed, and the simulation modeling for performance analysis is deduced. Based on this simulation model the performance analysis and comparison is carried out, and also validation test is executed about new suggested protocol.

• Computers and Concrete
• /
• 제4권1호
• /
• pp.49-66
• /
• 2007

The objective of this paper is to provide experimental data on the propagation of curved crack-surfaces and the respective load-displacement diagrams for the validation of numerical models for cracking of concrete, subjected to three-dimensional stress states. To this end beam-shaped specimens are subjected to combined bending and torsional loading, leading to the formation of a spatially curved crack-surface. The experimental data contain the evolution of the load and of the strains at selected points in terms of the crack mouth opening displacement and the propagation of the crack surface.

• 한국컴퓨터정보학회논문지
• /
• 제13권3호
• /
• pp.57-63
• /
• 2008

디지털 카메라, MP3 플레이어 등과 같은 가전 기기에서 낸드 플래시 메모리에 기반한 다양한 메모리 카드가 인기를 얻게 됨에 따라 기존 호스트 시스템과 새로 개발된 메모리 카드 간의 호환성 문제가 제품의 시장 진입에 큰장애가 되고 있다. 메모리 카드 호환성 테스트를 위한 일반적인 방법은 실제 호스트 시스템을 테스트 베드로 사용하는 것이다. 이를 개선하는 방법으로서 FPGA 기반의 프로토타입 보드를 이용하여 호스트 시스템을 에뮬레이션하는 것을 고려할 수 있다. 그러나 이 방법은 긴 셋업 시간을 필요로 하며, 다양한 호스트 및 장치 시스템을 표현하는데 제약이 있다. 본 논문에서는 Esterel 언어와 통합 시뮬레이션 기법에 기반한 모델을 이용하여 메모리 카드와 호스트시스템간의 호환성 테스트를 위한 통합 검증환경을 제안한다. 또한, 실제 메모리 카드 개발에 대한사례 연구를 통해 제안된 기법의 유용성을 증명한다.