• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.686-693
• /
• 2013

Generation Expansion Planning (GEP) is one of the most important decision-making activities in electric utilities. Least-cost GEP is to determine the minimum-cost capacity addition plan (i.e., the type and number of candidate plants) that meets forecasted demand within a pre specified reliability criterion over a planning horizon. In this paper, Differential Evolution (DE), and Opposition-based Differential Evolution (ODE) algorithms have been applied to the GEP problem. The original GEP problem has been modified by incorporating Virtual Mapping Procedure (VMP). The GEP problem of a synthetic test systems for 6-year, 14-year and 24-year planning horizons having five types of candidate units have been considered. The results have been compared with Dynamic Programming (DP) method. The ODE performs well and converges faster than DE.

• Journal of Information Processing Systems
• /
• 제19권5호
• /
• pp.563-575
• /
• 2023

Trajectory planning is a key technology for unmanned aerial vehicles (UAVs) to achieve complex flight missions. In this paper, a terminal constraints conversion-based Gauss pseudospectral trajectory planning optimization method is proposed. Firstly, the UAV trajectory planning mathematical model is established with considering the boundary conditions and dynamic constraints of UAV. Then, a terminal constraint handling strategy is presented to tackle terminal constraints by introducing new penalty parameters so as to improve the performance index. Combined with Gauss-Legendre collocation discretization, the improved Gauss pseudospectral method is given in detail. Finally, simulation tests are carried out on a four-quadrotor UAV model with different terminal constraints to verify the performance of the proposed method. Test studies indicate that the proposed method performances well in handling complex terminal constraints and the improvements are efficient to obtain better performance indexes when compared with the traditional Gauss pseudospectral method.

• 한국도로학회논문집
• /
• 제18권3호
• /
• pp.109-114
• /
• 2016

PURPOSES : The demand for extending national highways is increasing, but traffic monitoring is hindered because of resource limitations. Hence, this study classified highway segments into 5 types to improve the efficiency of short-term traffic count planning. METHODS : The traffic volume trends of 880 highway segments were classified through R-squared and linear regression analyses; the steadiness of traffic volume trends was evaluated through coefficient of variance (COV), and the normality of the data were determined through the Shapiro-Wilk W-test. RESULTS : Of the 880 segments, 574 segments had relatively low COV and were classified as type 1 segments, and 123 and 64 segments with increasing and decreasing traffic volume trends were classified as type 2 and type 3 segments, respectively; 80 segments that failed the normality test were classified as type 4, and the remaining 39 were classified as type 5 segments. CONCLUSIONS : A theoretical basis for biennial count planning was established. Biennial count is recommended for types 1~4 because their mean absolute percentage errors (MAPEs) are approximately 10%. For type 5 (MAPE =19.26%), the conventional annual count can be continued. The results of this analysis can reduce the traffic monitoring budget.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 International Symposium
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• 자동차안전학회지
• /
• 제16권2호
• /
• pp.6-13
• /
• 2024

This paper presents a method of longitudinal motion planning of autonomous vehicles to deal with the non-signalized crosswalk environment. Based on the traffic laws, vehicles should slow down when passing the non-signalized crosswalk to prepare for situations where a nearby pedestrian starts to cross. If a pedestrian is in the crossing phase, vehicles should stop in front of the stop-line and wait until the pedestrian finishes the crossing maneuver. To realize these behaviors in autonomous vehicles, the driving mode and corresponding driving strategy are determined when vehicles encounter the crosswalk. The driving mode is determined according to the behavioral status of the nearby pedestrian. Longitudinal motion for the stopping or passing maneuver is planned according to the determined driving mode. The proposed algorithm has been validated via autonomous driving tests with our test vehicle in a real world. The test results show that the proposed algorithm enables the test vehicle to follow the traffic laws and behave safely against crossing pedestrians in the non-signalized crosswalk.

• 토지주택연구
• /
• 제3권3호
• /
• pp.271-278
• /
• 2012

전 지구적인 기후변화와 지구 온난화에 따라 서구 선진 국가들을 중심으로 저탄소 녹색성장(green growth)이 이슈로 등장하고 있고 이 전략은 미래의 성장동력으로까지 발전되고 있다. 저탄소 사회를 달성하기 위하여 세계 각국은 교토의정서를 체결하고 온실가스배출량을 2008년부터 2012년까지 1990년도 수준의 5.2%까지 줄이도록 선언하였다. 한편 급속한 도시개발과 불투수면적의 증가는 도시의 물순환의 변화를 초래한다. 본 연구에서는 녹색도시 개념을 검토하고 기존의 연구를 바탕으로 도시 및 단지수준에 적합한 물순환 계획요소를 검토하였다. 추가적으로 본 연구에서는 SWMM5-LID 수문모형을 이용하여 시범유역에 물순환 효과를 분석하였다. 물순환 분석은 개발전, 개발후, 녹색도시계획요소적용후(LID시설 적용후)에 대한 시범유역의 도시유출연속모의를 통하여 수행되었다.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.159-167
• /
• 2015

We consider a wafer lot transfer/release planning problem from semiconductor wafer fabrication facilities to probing facilities with the objective of minimizing the deviation of workload and total tardiness of customers' orders. Due to the complexity of the considered problem, we propose a two-level hierarchical production planning method for the lot transfer problem between two parallel facilities to obtain an executable production plan and schedule. In the higher level, the solution for the reduced mathematical model with Lagrangian relaxation method can be regarded as a coarse good lot transfer/release plan with daily time bucket, and discrete-event simulation is performed to obtain detailed lot processing schedules at the machines with a priority-rule-based scheduling method and the lot transfer/release plan is evaluated in the lower level. To evaluate the performance of the suggested planning method, we provide computational tests on the problems obtained from a set of real data and additional test scenarios in which the several levels of variations are added in the customers' demands. Results of computational tests showed that the proposed lot transfer/planning architecture generates executable plans within acceptable computational time in the real factories and the total tardiness of orders can be reduced more effectively by using more sophisticated lot transfer methods, such as considering the due date and ready times of lots associated the same order with the mathematical formulation. The proposed method may be implemented for the problem of job assignment in back-end process such as the assignment of chips to be tested from assembly facilities to final test facilities. Also, the proposed method can be improved by considering the sequence dependent setup in the probing facilities.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.161-170
• /
• 2021

The study aims to investigate the mediating effect of strategic planning on the relationship between managerial skills and the performance of small- and medium-sized enterprises (SMEs) in Punjab, Pakistan. Stratified proportionate probability sample method was used to select the 265 SMEs. The study applied a structural equation model (SEM) to analyze the proposed research hypotheses by using PLS-SEM. This research examines the direct and indirect effects of strategic planning on the performance of SMEs using the SEM test. The results indicate the positive effect of managerial skills on SMEs' performance and also suggested that strategic planning mediates the relationship between managerial skills and SMEs' performance. In addition, the role of managerial skills on the usage of the company's resources is highly influential through strategic planning. Strategic planning has been found to impact significantly and positively on the relationship between managerial skills and performance of SMEs in Punjab, Pakistan. The findings suggested that, in devising appropriate strategies for SMEs, the effect of managerial skills on the utilization of the firm's resources can be more effective to the firm's performance. In short, the utilization of a firm's resources through a proper planning is more essential for the sustainability of SMEs.

• 지역사회간호학회지
• /
• 제7권2호
• /
• pp.410-419
• /
• 1996

This study was reviewed from 1000 articles related to family planning from 1970 to 1990 and 20 articles associated with natural family planning from 1980 until the present. The purpose of natural family planning(NFP) is to identify the time ovulation of women themselves, to have intercourse with periodic abstinence, and to deliver a healthy child. The ultimate goal of NFP is to promote the family's health. The NFP method is described as periodic abstinence of intercourse to avoid pregnancy by identifying the ovulation time in the menstration cycle. Clinical symptoms and signs of reflection underlying changes in Estrogen and Progesterone are the change of basal body temperature, the change of cervical mucus and cervix, abdominal pain and breast tenderness. The types of NFP are the calender rthythm method, basal body temperature methods, cervical mucus method, symptothermal method, cyclo-thermal method and home based ovulation test kits. Recently the cyclo-thermal method involved. It is calendar rhythm method applied to B.B.T. For the cervical mucus method, when the estrogen level in the blood concentration is increased, the mucus begins to excrete, the amount of moist mucus increases while the mucus is clear, slippery, and smooth. For 3 days, this timing can be considered contraception. Fertility is at a maximum on the day mucus appears, abstinence for 3 days is a type of contraception. Sexual intercourse on a maximum day of mucus maximizes pregnancy potential. But, the contraception depends on the practice of a perfect rule. For basal body temperature methods, at ovulation time, the temperature increases $0.2^{\circ}C-0.5^{\circ}C$. Through the review of literature a high temperature above $0.2^{\circ}C$ for 3 days indicates that the previous 6 day period was ovulation and fertilization. The Symptothermal method is used to determine the prediction of ovulation through the observation of mucus excretion, high temperature, the change of cervical mucus, low abdominal pain, vaginal discharge, and breast change. Home based ovulation test kits are cervico-vaginal fluid aspiration, test a digital electric thermometer, body fluid(blood, saliva, urine) test kits, They are on the market. However, research on the contraception method is still in progress. For pregnancy it is still too early to use home based ovulation test kits because of deficit of reliability and simplicity more research on the technology is needed. It is suggested that NFP methods be included in nursing curriculum in order to educate NFP users how to effectively use NFP methods. Furthermore, this study has implications for the dissemination of NFP methods in terms of Korean policies of family planning and the support of community welfare agences.