• Environmental Analysis Health and Toxicology
• /
• v.9 no.3_4
• /
• pp.91-101
• /
• 1994

In order to evaluate the ecotoxicological harzardousness of synthetic surfactants on Han river, Jung-ryang and Jin-Wi stream, we used the Ecotoxicological Risk Quotient (ERQ). The chemical harzardousness is evaluated by the balance of the toxicity and concentration in the environment.. Then, ERQ is defined as follows; ERQ = - log ( Concentration in the environment / Effective concentration in the test ) ERQ of chemical is a logtrighmic value of ratio of a chemical concentration and the toxicity in the laboratory. In case of small ERQ, tie chemical harzardousness is high. If ERQ equals O, the same biological effect as in the laboratory test will be observed in the enviromment by the chemicals. ERQ values of the chemicals were calculated using the maximum concentration in water environment which were cited from the annual report by our ministry of environment, and EC$_{50}$ of Daphnia magna (water flea; acute immobilization test) LC$_{50}$ of Oryzias latipes (fish; acue toxicity test) and EC$_{50}$ of chlorella vulgaris (alga; growth inhibition test), which were taken from the annual report of "Chemical in environment" by Japan EA. Liner alkylbenzene sulfonate (determined to MBAS) showed the high average values with more than 2.0 to three species in Han river and Jin-wi stream, and these results mean to be favorable to environmental safety. The areas of Jung-ryang stream were polluted, as the average values of ERQ were less than 2.0 with equal to three species, and attention should be paid. Therefore, they must be inspected again because their concentration in the environment may have changed during that period. The chemical harzardousness can be numerated with ERQ, and it can be a help to find the chemicals that should be kept under observation and to see whether the chemical pollution is improved or worsened. The determination of the chemical concentration in the environment and toxicity are essential for the effective use of ERQ.se of ERQ.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.747-750
• /
• 2004

After launching, spacecraft is exposed to extreme environments. So spacecraft should be tested after design/manufacture to verify whether components can be operated functionally. Acceleration transferred from launch vehicle to spacecraft produces quasi-static load, sine vibration and random vibration. Random vibration is also induced by acoustic vibrations transferred by surface of spacecraft. And shock vibration is produced when spacecraft is separated from launch vehicle. To verify operation of spacecraft under these launch environments, separation shock test, sine vibration test, acoustic vibration test and random vibration test should be performed. This paper describes these launch environment test requirements.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.2
• /
• pp.94-104
• /
• 1996

The satellite experiences the launch environment such as vibration, acceleration, shock induced by rocket and the orbit environment such as high vacuum, no gravity, high temperature and cryogenic. Therefore, the satellite should be designed and manufactured to endure such environments. Also, special care must be taken on the assembly of parts and subsystem. Finally, we describe the environment test of microsatellite to ensure the reliable operation during launch period as well as in-orbit operation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.397-403
• /
• 2015

This paper presents a new SOC test compression scheme in Embedded Deterministic Test (EDT) compression environment. Compressed test data is brought over the TAM from the tester to the cores in SOC and decompressed in the cores. The proposed scheme allows cores tested at the same time to share some test channels. By sharing free variables in these channels across test cubes of different cores decompressed at the same time, high encoding efficiency is achieved. Moreover, no excess control data is required in this scheme. The ability to reuse excess free variables eliminates the need for high precision in matching the number of test channels with the number of care bits for every core. Experimental results obtained for some SOC designs illustrate effectiveness of the proposed test application scheme.

• Corrosion Science and Technology
• /
• v.17 no.5
• /
• pp.211-217
• /
• 2018

Natural degradation of grounding-electrode in soil environment should be monitored for several decades to predict the lifetime of the grounding electrode for efficient application and management. However, long-term studies for such electrodes have many practical limitations. The conventional accelerated corrosion test is unsuitable for such studies because simulated soil corrosion process cannot represent the actual soil environment. A preliminary experiment of accelerated corrosion test was conducted using existing test standards. The accelerated corrosion test that reflects the actual soil environment has been developed to evaluate corrosion performances of grounding-electrodes in a short period. Several test conditions with different chamber temperatures and salt spray were used to imitate actual field conditions based on ASTM B162, ASTM B117, and ISO 14993 standards. Accelerated degradation specimens of copper-bonded electrodes were made by the facile method and their corrosion performances were investigated. Their corrosion rates were calculated to $0.042{\mu}m/day$, $0.316{\mu}m/day$, and $0.11{\mu}m/day$, respectively. These results indicate that accelerated deterioration of grounding materials can be determined in a short period by using cyclic test condition with salt spray temperature of $50^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.15-18
• /
• 2004

In this paper, it is implemented the monitoring system for TV advertisement using video watermark. The functions of an advertisement monitoring system are automatically monitoring for the time, length, and index of the on-air advertisement, saving the log data, and reporting the monitoring result. The performance of the video watermark used in this paper is tested for TV advertisement monitoring. This test includes LAB test and field test. LAB test is done in laboratory environment and field test in actually broadcasting environment. LAB test includes PSNR, distortion measure in image, and the watermark detection rate in the various attack environment such as AD/DA(analog to digital and digital to analog) conversion, noise addition, and MPEG compression The result of LAB test is good for the TV advertisement monitoring. KOBACO and SBS are participated in the field test. The watermark detection rate is 100% in both the real-time processing and the saved file processing. The average deviation of the watermark detection time is 0.2 second, which is good because the permissible average error is 0.5 second.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.206-213
• /
• 2007

In this paper, The monitoring system for TV advertisement is implemented using video watermark. The functions of the advertisement monitoring system are monitoring the time, length, and index of the on-air advertisement, saving the log data, and reporting the monitoring result. The performance of the video watermark used in this paper is tested for TV advertisement monitoring. This test includes LAB test and field test. LAB test is done in laboratory environment and field test in actually broadcasting environment. LAB test includes PSNR, distortion measure in image, and the watermark detection rate in the various attack environment such as AD/DA(analog to digital and digital to analog) conversion, noise addition, and MPEG compression. The result of LAB test is good for the TV advertisement monitoring. KOBACO and SBS are participated in the field test. The watermark detection rate is 100% in both the real-time processing and the saved the processing. The average deviation of the watermark detection time is 0.2 second, which is good because the permissible average error is 0.5 second.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.3-9
• /
• 2022

The role of the integrated development environment is very important in software development of a development project. After many developers develop different modules, software product is completed through compile, debugging, integration, testing, and distribution. However, bugs and various issues in the development process cause problems such as quality deterioration of software product and dissatisfaction with requirements. So the need for automated testing to avoid these problems and improve quality has increased. In this study, we propose test automation modules of four perspectives to improve quality throughout the test automation in an integrated development environment. Each automation module operates through the tool chain of an integrated build framework implemented on the devops.

• Korean Journal of Veterinary Service
• /
• v.30 no.1
• /
• pp.155-164
• /
• 2007

This study was conducted to investigate the prevalence of canine heartworm infections, canine brucellosis and hematologic values from 153 free roaming dogs in the area of Gwangju city from March to November 2006. Nineteen (12.4%) of 153 samples tested with modified Knott's technique showed positive reaction for microfilariae. Polymerase chain reaction using specific primers for D immitis amplified the expected product from all samples of 19 microfilaremic canine blood samples as determined by the modified Knott's test for microfilariae. The seasonal infection rates of microfilariae were higher in the spring season (10/19, 52.6%) than in the other seasons. The major hematological findings in microfilaremic dogs were mild leukocytosis and mild monocytosis. A total of 100 dogs randomly selected from 153 free roaming dogs were negative for canine brucellosis by serological test using immunochromatographic antibody test kit.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.1
• /
• pp.23-32
• /
• 1988

The exposure level of respirable dust and silica for the coal workers of underground coal mines in Taebaek area was evaluated. Personal air samplers were attached to the coal workers-drillers, coal cutters, their helpers, haulers, and separators. Normality and lognormality of respirable dust and silica concentrations were tested by Kolmogorov-Smirnov one-sample test, differences of means of respirable dust and silica concentration were tested by group-t-test and paired t-test, and relation between respirable dust and silica concentration were tested by regression test.