• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.1
• /
• pp.13-21
• /
• 2017

This paper describes a design scheme of a system that tests or polls from the students at online class. By online test, the teacher can test the pre-knowledge level of the students and know how much students understand the lecture of the class. As the number of test increases, the burden of the preparation of setting question, evaluation of the test, and management of the test results is increased. In this environments, an online test management system make it easy to test and evaluate, and thus it would be a good tool for maintaining and managing the total procedure of the test or poll of the students. For evaluating the design of the system, we made a test system prototype and performed evaluations of the online test system. The online test and evaluation system provides a good tool for testing and evaluation of student's knowledge at the class with easy and fast way.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.833-840
• /
• 2003

The stability of structure, effectiveness of design and construction are very important factors in soil-structure design. The design-parameter is based on the test through laboratory-test and field-test. There are two ways to obtain the design-parameter. One is to through test, and the other is through relative documents and references. Recently, statistics has been used to get reliable data. In this study, Kriging method as Geostatistics and the theory of Bayesian's inference are used and the design-parameters are obtained. As the result of this study to the design-parameter is reliable and information about soil condition and soil properties in design and construction is easily found.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.259-260
• /
• 2019

Through Korean Smart-Navigation Project we are tasking with a VDES test network construction and service solution development. In this task, we design a structure that interoperates the VDES network with the service host/client simulator which is communication framework for efficient and reliable and seamless service. The proposed structure includes interface design between VDES test equipments which is VDES shore station, mobile station, gate way, service host and client. And detailed design includes message definition, interface design, operation scenario, equipment design and implementation for VDES test network. After implementing these test equipments with proposed design, we will firstly proceed the test equipment integration and interface test indoors for VDES test network. After fully verifing the VDES test network through indoor tests, we will construct the VDES shore station and mobile station and conduct the sea area tests by 2020.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.980-986
• /
• 2007

Boundary scan test structure(JTAG IEEE 1149.1 standard) that supports an internal scan chain is generally being used to test CUT(circuit under test). Since the internal scan chain can only have a single scan-in port and a single scan-out port; however, existing boundary test methods can not be used when multiple scan chains are present in CUT. Those chains must be stitched to form a single scan chain as shown in this paper. We propose an efficient boundary scan test structure that adds a circuit called Clock Group Register(CGR) for multiple clocks testing within the design of multiple scan chains. The proposed CGR has the function of grouping clocks. By adding CGR to a previously existing boundary scan design, the design is modified. This revised scan design overcomes the limitation of supporting a single scan-in port and out port, and it bolsters multiple scan-in ports and out ports. Through our experiments, the effectiveness of CGR is proved. With this, it is possible to test more complicated designs that have high density with a little effort. Furthermore, it will also benefit in designing those complicated circuits.

• Geomechanics and Engineering
• /
• v.7 no.2
• /
• pp.201-212
• /
• 2014

Due to the sea-crossing bridge span is generally large and main pier pile foundations are located in deep water and carry large vertical load, sea-crossing bridge main pier pile foundations bearing mechanism and load deformation characteristics are still vague. Authors studied the vertical bearing properties of sea-crossing bridge main pier pile foundations through pilot load tests. Large tonnage load test of Qingdao Bay Bridge main pier pile program is designed by using per-stressed technique to optimize the design of anchor pile reaction beam system. Test results show that the design is feasible and effective. This method can directly test bearing capacity of main pier pile foundations, and analysis bearing behaviors from test results of sensors which embedded in the pile. Through test study the vertical bearing properties of main pier pile foundation and compared with the generally short pile, author summarized the main pier pile foundations vertical bearing capacity and the main problem of design and construction which need to pay attention, and provide a reliable basis and experience for sea-crossing bridge main pier pile foundations design and construction.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.42-46
• /
• 2018

The subject of this study dealt with the structural safety analysis regarding the measured thrust test equipment as noted on a small engine. In this work, the structural design and analysis of steel and aluminum alloy structure for a small engine test of equipment were performed. Firstly, the structural design requirements of the engine test equipment were identified and investigated. After the structural design was reviewed, next the structural analysis of the engine test equipment was performed by the utilization of the finite element analysis method. The study was performed to determine that the stress and displacement analysis was appropriately managed regarding the applied load condition. As a result, it was determined that through the structural analysis, this study has confirmed that the designed engine test equipment is approved for safety, and meets its design purpose at this time.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.144-153
• /
• 2016

This paper aims to demonstrate the design, structure analysis, and hydrostatic pressure test of the cylinder used in 2000m water depth. The cylinder was designed in accordance with ASME pressure vessel design rule. The 1.5 times safety factor required by the general rule was applied to the design of the cylinder, because ASME rule is so excessive that it is not proper to apply to the hydrostatic pressure test. The finite element analysis was conducted for the cylinder. The cylinder was produced according to the design. The hydrostatic pressure test was conducted at the hyperbaric chamber in KRISO. The results of finite element analysis(FEM) and those of the hydrostatic pressure test were almost the same, which showed that the design was exact and reliable.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.1
• /
• pp.8-15
• /
• 1993

A concrete disign of memory circuit is presented aiming at the application of sliding diagonal test patterns. A modification of sliding diagonal test pattern includes the complexity reduction from O(n$^{32}$) to O(n) using parallel test memory concept. The control circuit design was based on delay-element, and verified via logic and circuit simulation. Area overhead was evaluated based on physical layout using a 0.7 micron design rule resulting in about 1% area increase for a typical 16Mbit DRAM.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1531-1535
• /
• 2008

The Tester of Autonomous station control system is a system which can test the main function of Autonomous station control system through the data field. The purpose of this paper is to meet the system requirements and design a main function, menu and user interface using Use-case. The main function is a time-deadline test, a schedule broadcast test, a route control test and a version-up test, etc. The design of Autonomous station control system tester plays a primary role of the important document for the upcoming future system development of the tester.

• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.66-75
• /
• 2020

The purpose of this study is to norm the engineering design competency test. To achieve the purpose of the study, a survey was conducted on engineering college students nationwide using engineering design competency test developed in the precedent study, and a total of 2,859 questionnaires were analyzed. The main results are as follows. First, the national average of engineering design competency scores was 158 out of 240 points. Second, there was no significant difference between genders in engineering design competency by background variables. On the other hand, there was a significant difference by major. It was found that mechanical and construction majors have higher engineering design competency than IT and chemical/material engineering majors. Also, the scores of engineering design competency increased as the grade went up. Third, the number of courses related to engineering design did not affect by engineering design competency, but the actual number of times of experience in engineering design was affected by engineering design competency.