• Atmosphere
• /
• v.23 no.1
• /
• pp.85-92
• /
• 2013

We estimate atmospheric radiative heating effect of aerosols, based on AErosol RObotic NETwork (AERONET) and lidar observations and radiative transfer calculations. The column radiation model (CRM) is modified to ingest the AERONET measured variables (aerosol optical depth, single scattering albedo, and asymmetric parameter) and subsequently calculate the optical parameters at the 19 bands from the data obtained at four wavelengths. The aerosol radiative forcing at the surface and the top of the atmosphere, and atmospheric absorption on pollution (April 15, 2001) and dust (April 17~18, 2001) days are 3~4 times greater than those on clear-sky days (April 14 and 16, 2001). The atmospheric radiative heating rate (${\Delta}H$) and heating rate by aerosols (${\Delta}H_{aerosol}$) are estimated to be about $3\;K\;day^{-1}$ and $1{\sim}3\;K\;day^{-1}$ for pollution and dust aerosol layers. The sensitivity test showed that a 10% uncertainty in the single scattering albedo results in 30% uncertainties in aerosol radiative forcing at the surface and at the top of the atmosphere and 60% uncertainties in atmospheric forcing, thereby translated to about 35% uncertainties in ${\Delta}H$. This result suggests that atmospheric radiative heating is largely determined by the amount of light-absorbing aerosols.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.73-82
• /
• 2017

In this research, we tried to check the applicability of a Chow test to the linear models which are generated in the process of transportation planning or traffic flow analyses. The Chow test is a very popular statistical method which is being used to see if the coefficients from two separate linear regression models are equal or not. In order to prove the effectiveness of the Chow test, we found the linear relationships between speed and density under the situations such as driving in daytime and in nighttime on a rainy day. Based on the two months of Joong-Bu Expressway traffic data, we proved that the Chow test is useful to testify the similarity between two linear regression models. And this statistical tool seems to be able to have a very important role in traffic flow analysis or in transportation planning process. Finally, we expect the Chow test be implemented even to the non-linear regression models or to the multi-variate models.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.770-782
• /
• 2021

Objective: The aim of the present study was to compare the effectiveness of three approaches (the seasonal auto-regressive integrated moving average [SARIMA] model, the nonlinear autoregressive exogenous [NARX] artificial neural networks and Wood's model) to the prediction of milk yield during lactation. Methods: The dataset comprised monthly test-day records from 965 Polish Holstein-Friesian Black-and-White primiparous cows. The milk yields from cows in their first lactation (from 5 to 305 days in milk) were used. Each lactation was divided into ten lactation stages of approximately 30 days. Two age groups and four calving seasons were distinguished. The records collected between 2009 and 2015 were used for model fitting and those from 2016 for the verification of predictive performance. Results: No significant differences between the predicted and the real values were found. The predictions generated by SARIMA were slightly more accurate, although they did not differ significantly from those produced by the NARX and Wood's models. SARIMA had a slightly better performance, especially in the initial periods, whereas the NARX and Wood's models in the later ones. Conclusion: The use of SARIMA was more time-consuming than that of NARX and Wood's model. The application of the SARIMA, NARX and Wood's models (after their implementation in a user-friendly software) may allow farmers to estimate milk yield of cows that begin production for the first time.

• Toxicological Research
• /
• v.16 no.1
• /
• pp.27-31
• /
• 2000

Recently, there is a worldwide concern that a great number of man-made chemicals have a hormone-like action both in humans and in animals. EPA and OECD are developing screening programs using validated test systems to determine whether certain substances may have an effect on humans. In the present study, the establishment of in vivo short-term test system for pubertal female assay with thyroid to detect endocrine disrupting chemicals was tried using a model substance, methoxychlor (MC), a chlorinated hydrocarbon insencticide. Forty female rats were assigned to four groups. MC was administered at dose levels of 0, 8, 40 and 200mg/kg by gavage to female rats from day 21 post partum to the completion of vaginal opening. We evaluated body weight change, age at vaginal opening, onset of estrous cyclicity, age at first esturs, ovary weight, and serum concentrations of thyroxine and thyroid stimulating hormone in female rats. The age at vaginal opening of females receiving 40 200mg/kg was significantly younger than control. The onset of estrus cyclicity and age at first estrus of females receiving 200mg/kg was also younger than controls. There was no effect of treatment on body weight, ovary weight, and hormone concentration. Based on these results, it can be concluded that application of MC at dose level of 40mg/kg affects the vaginal opening and application of MC at dose level of 200mg/kg accelerates the vaginal opening and the onset of estrus cylicity.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.2
• /
• pp.221-236
• /
• 2016

The aim of this paper is to investigate the compressive behavior and characteristics of amorphous metallic fiber-reinforced concrete (AMFRC). Compressive tests were carried out for two primary parameters: fiber volume fractions ($V_f$) of 0, 0.3, 0.6 and 0.8 %; and design compressive strengths of 27, 35, and 50 MPa at the age of 28 days. Test results indicated that the addition of amorphous metallic fibers in concrete mixture enhances the toughness, strain corresponding to peak stress, and Poisson's ratio at high stress level, while the compressive strength at the 28-th day is less affected and the modulus of elasticity is reduced. Based on the experimental results, prediction equations were proposed for the modulus of elasticity and strain at peak stress as functions of fiber volume fraction and concrete compressive strength. In addition, an analytical model representing the entire stress-strain relationship of AMFRC in compression was proposed and validated with test results for each concrete mix. The comparison showed that the proposed modeling approach can properly simulate the entire stress-strain relationship of AMFRC as well as the primary mechanical properties in compression including the modulus of elasticity and strain at peak stress.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.72-81
• /
• 2011

In the present day, the needs of new steel for lightweight car-body have been increased in the automotive industry. however, the resistance spot welding is difficult to apply to the new steel because of the narrow weld current range and defects. As the solutions to these problems, adhesive bonding process is proposed. Adhesive bonding which reduce noise and vibration can be applied to joining the new steel. In this study, crash tests of b-pillar applied the resistance spot welding, structural adhesive bonding, the mixture of the structural adhesives and resistance spot welding were performed. And FEM crash model for b-pillar applied the structural adhesive bonding was developed. The results of experiment and analysis on b-pillar crash test were compared to verify the validity.

• YAKHAK HOEJI
• /
• v.57 no.2
• /
• pp.119-124
• /
• 2013

The aim of this present study was to investigate the antifungal effect of tanshinones isolated from Salvia miltiorrhiza against Candida ablicans, a polymorphic fungus. For the work, tanshinone IIA (TSN), cryptotanshinone (CTS), and dihydrotanshinone I (DTS) were chosen. Initially, their antifungal effect was analyzed by in-vitro susceptibility test. Data from the susceptibility test showed that while all of these three compounds had antifungal activity, DTS was the most potent. At $100{\mu}g$ DTS/ml, there was about 80% CFU (colony forming unit) reduction as compared to DTS-untreated C. albicans yeast cells (P<0.05). Thus, DTS was selected to determine its antifungal activity in a murine model of disseminated candidiasis due to C. albicans. Results showed that DTS enhanced resistance of mice against disseminated candidiasis. During the entire period of 30-day observation, 60% of DTS-given mice groups survived whereas control animals all died within 14 days (P<0.05). Moreover, DTS inhibited the hyphal production, one of the virulence factors of this fungus, from the blastoconidial form of the fungus. Therefore, the tanshinone appears to have antifungal activity specific for C. albicans infection, which could possibly be mediated by the blockage of hyphal production.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.3
• /
• pp.349-356
• /
• 2012

Purpose : This study was designed to investigate the effects of pulsed electromagnetic field on functional recovery and expression of GAP-43 after incomplete spinal cord injury (SCI) in rats. Methods : To confirm the damage of SCI and effects of pulsed electromagnetic field, 20 Sprague-Dawley male rats were used and divided randomly 2groups (SCI, PEMF). Incomplete SCI was induced by using modified NYU drop model. After operation, functional recovery test, immunohistochemistry and western blot analysis were measured at 1, 2, 3 weeks. Pulsed electromagnetic field were apply three weeks (one times a day, five days a week and twenty minutes a session). Results : In the this study, applications of pulsed electromagnetic field after incomplete SCI induced the significant improvement in functional recovery and expression of neurotrophic factor. The results were as follows; Foot print test, PEMF were significantly decreased than the SCI (p<.05). Expression of GAP-43, PEMF were significantly increased than the SCI at 2 and 3 weeks (p<.05). Conclusion : In conclusion, pulsed electromagnetic field were positive effect in functional recovery and expression of GAP-43 after incomplete SCI in rats.

• Computers and Concrete
• /
• v.21 no.2
• /
• pp.157-166
• /
• 2018

This article presents the flexural behaviour of reinforced fly ash (FA)-based geopolymer concrete (GPC) beams with partial replacement of FA for about 10% by weight with paper sludge ash (PSA). The beams were made of M35 grade concrete and cured under three curing conditions for comparison viz., ambient curing, external exposure curing, and oven curing at $60^{\circ}C$. The beams were experimentally tested at the 28th day of casting after curing by conducting two-point loading flexural test. Performance aspects such as load carrying capacity, first crack load, load-deflection and moment-curvature behaviours of both types of beams were experimentally studied and their results were compared under different curing conditions. To verify the response of reinforced GPC beams numerically, an ANSYS 13.0 finite element program was also used. The result shows that there is a good agreement between computer model failure behaviour with the experimental failure behaviour.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.37-44
• /
• 2000

The objectives of the research were to modify and validate a daily water balance model, DIROM, for irrigation reservoirs using field data, and to estimate daily water supply from the reservoirs in the Han river basin. Modified DIROM was applied to three test sites, and validated with field data. The relative errors between the simulated and observed water supply were less than 10 percent. Historical records on daily or ten-day’s storage for 110 reservoirs from the twenty Farmland Improvement Associations, FIA were collected and used to estimate the daily water supply during 1993 to 1997. The results were applied to the other 723 reservoirs that are not owned by FIA. The five-year averaged annual water supply from the reservoirs was estimated to be 180 million ㎥/yr. Maximum yearly water supply was recorded to be 190 million ㎥/yr in 1996.