• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.476-477
• /
• 2014

This paper relates to the automotive silencers reduce noise generated from the actual vehicle for the activity is based on was worth. To do this, the noise from cars to distinguish them by category, characteristics of turbo charger was designed to reduce noise. In order for the design of acoustic modeling using line dynamics, was analyzed using In house & the commercial software programs. Silencers have about several basic elements. Expand, collapse, perforated plate, and the combination are the basic reactive or dissipative elements. Finally, DFSS(design for six sigma) method was designed. and it was verified in vehicle test. The new developed silencers showed good performance vehicle test results. also, the net cost also indicated excellent results compared with other company.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.88-98
• /
• 1992

Real automobiles have been utilized to study the occupant behaviors and the response of the structures in the crash environment. Since various parameters are involved in the automobile crashworthiness, a number of experiments must be conducted. The experiments have been contributed to increasing the cost due to the fact that the test is quite expensive. Therefore, computer simulation is adopted to reduce the number of experiments. A few computer programs have been developed specifically to solve the occupant responses in the crash environment. In this research, a software is used to study the occupant dynamic analysis. A modeling of occupant analysis is established for a passenger car and the results are verified through comparisons with real experiments. In the modeling, data are tuned very carefully so that simulated results such as HIC(Head Injury Criterion) and acceleration of each body may approximate to the experimental results. The compared experiment is a barrier test which is carried out by frontal impact. A feedback to the design process is suggested from the result of this research.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.8-16
• /
• 1986

This study was carried out to develop a microcomputer-based data acquisition system for engine performance test. A low-cost data acquisition system was developed utilizing an "APPLE II PLUS" microcomputer. The developed system consists of microcomputer, RPM counter included frequency-to-voltage converter, preamplifier for two load cells and 8-bit analog-to-digital converter with 16 chnnels. The system simultaneously measures engine speed by means of photointerrupter, torque and fuel consumption by means of load cells with variable sample numbers, sampling intervals and repetitions. The system collects, processes and provides data for storing on the $4{\frac{1}{4}}$ inch floppy disk as well as for writing out on the printer.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.24-30
• /
• 1986

In order to collect the engine performance data accurately, rapidly and reliabily, the microcomputer-based engine performance test system was developed and tested. The system measures engine shaft torque and speed, fuel consumption, exhaust gas temperature, engine shaft power and fuel consumption ratio. The system consisted of 32 channels 8 bit A/D converter, time clock, dynamic strain amplifier and signal conditioning circuits to amplify and filter the electrical signal from transducers. Most of transducers were devised for low cost, easy setting and self-manufacturing. The system has been installed on a small kerosene engine (DAEDONG NA50B).

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.347-360
• /
• 2008

In this paper, a Hardware-In-the-Loop simulator to simulate attitude control of space craft using momentum wheels is developed. The simulator consists of a spherical air bearing system allowing rotation and tilt in all three axes, three momentum wheels for actuation, and an AHRS (Attitude Heading Reference System). The simulator processes various types of data in PC104 and wirelessly communicates with a host PC using TCP/IP protocol. A simple low-cost momentum wheel assembly set and its drive electronics are also developed. Several experiments are performed to test the performance of the momentum wheels. For the control performance test of the simulator, a PID controller is implemented. The results of experimental demonstrations confirm the feasibility and validity of the Hardware-In-the-Loop simulator developed in the current study.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.4
• /
• pp.341-348
• /
• 1990

This paper describes an algorithm for evaluating the Loss of Load Probability (LOLP) and calculating the production cost for all the generators in the system using Fast Hartley Transform (FHT). It also suggests the deconvolution procedure which is necessary for the generation expansion planning. The FHT is as fast as or faster than the Fast Fourier Transform (FFT) and serves for all the uses such as spectral, digital processing, and convolution to which the FFT is normally applied. The transformed function using FFT has complex numbers. However, the transformed function using FHT has real numbers and the convolution become quite simple. This method has been applied for the IEEE reliability test system and practical size model system. The test results show the effectiveness of the proposed method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.139-142
• /
• 2001

As microeletronics technology continues to progress, there is also a continuous demand on highly integration and miniaturization of systems. For example, it is desirable to package several integrated circuits together in multilayer structure, such as multichip modules, to achieve higher levels of compactness and higher performance. Passive components (i.e., capacitors, resistors, and inductors) are very important for many MCM applications. In addition, the low-temperature co-fired ceramic (LTCC) process has considerable potential for embedding passive components in a small area at a low cost. In this paper, we investigate a method of statistically modeling integrated passive devices from just a small number of test structures. A set of LTCC inductors is fabricated and their scattering parameters (5-parameters) are measured for a range of frequencies from 50MHz to 5GHz. An accurate model for each test structure is obtained by using a building block based modeling methodology and circuit parameter optimization using the HSPICE circuit simulator.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.292-294
• /
• 2006

Many processes have been introduced to join PE pipes, but most of these methods have lots of disadvantages such as costs and lack of reliability, etc. Recently due to the benefits of cost, safety and reliability, the butt welding has been paid much attention to joint PE pipes. In case of butt welding, the heat plate which is used to melt PE pipes is the most critical equipment. In this study, after developing the heat plate of new shape, the PE double wall pipes with misalignments were butt-welded by using the conventional and developed heat plates and comparison of weld-zones and tensile test was performed. As the results of tensile test, weld-zones using developed heat plate have strength of $147.7{\sim}251.0%$ of weld-zones using conventional heat plate.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.533-538
• /
• 2000

This study has been carried out to develop a CRT die using hot forging. The conventional CRT die made by casting has defects such as void and inclusion. These defects of the cast die make micro-spots on the surface of the CRT which affect the quality of the final product. So, a hot forging process is developed to avoid these defects of CRT die by the model material test and the rigid-plastic FEM. Firstly, model material tests are carried out with plasticine billets in order to investigate the material flow pattern in the die cavity and to get the reasonable initial values for designing the preform in the FE simulation. And then a finite element analysis has been performed to Predict the preform and the forging load of a CRT die. We also suggest an integrated die-set which combines two die-sets into one die-set to save manufacturing time and cost in case of similar die-size.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1065-1072
• /
• 2010

Case studies published in Korea versus the low ground fault is applied on the bridge based on theory or experience in the design of pile bearing capacity by the value of the expression is designed to conduct field tests Disclosure Load bearing capacity value, the result of applying a reasonable construction cost savings of approximately 10 eokyeowon Has, in the design of site investigation was insufficient to require additional efforts. Apply the appropriate value from the extra support in the design of accurate ground survey and air speed to cut the budget and social technology can ensure the reliability was unknown.