• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.101-106
• /
• 2007

In this paper, the authors demonstrate a new idea to take the place of the real pressure vessel test, which should be carried out in a high pressure experiment unit before the real sea trial test. The idea is to make a pressure vessel model as a replica of the real pressure vessel test, which can reduce the cost of making a pressure vessel and large pressure experiment unit. The pressure vessel model was designedbased on linear-elastic, buckling equations and Finite Element Analysis. The manufactured pressure vessel model was investigated and monitored while the pressure test was being conducted. After the test, the result and the validity of the pressure vessel model as a replica of the real pressure vessel test was studied.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.78-84
• /
• 2009

This paper presents development results of integrated operating program and its simulator for an inshore test miner. The inshore test miner drives on the seabed and collects manganese nodules. For operating the test miner, integrated operating program (IOP) is needed for remote control and monitor of the miner in real-time. However, it is hard to develop the practical IOP for the test miner system, because the system is big, expensive, and unique. So a simulator was developed as a test substitute in order to save time and to reduce cost. Using test results of the simulator, the IOP of the test miner was developed. The developed IOP consists of remote program, host program, monitoring program and database program. The operating program was developed using PXI and Labview of NI. The experimental results are presented to show the applicability of the developed program.

• Smart Media Journal
• /
• v.10 no.3
• /
• pp.54-59
• /
• 2021

Flight data acquired through flight instrumentation equipment during aircraft development play an important role in aircraft development and performance improvement. Therefore, as the reliability of flight instruments is required, inspection systems to check the soundness of flight instruments are very important. In this paper, we analyze the existing test system for flight data instrumentation equipment and present improvements in the hardware and software aspects of the test system. Based on this, we design and implement a test system with improved performance and present test results. Test system with improved performance improves cost savings, flexible application, and maintenance compared to the existing test system. Therefore, the robustness of the instrumentation equipment can be obtained, which can be expected to improve the reliability of flight data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.1013-1014
• /
• 2010

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.115-125
• /
• 1999

Much efforts are being process at many ways for digitization cadastral maps that will be the base map of Parceled Based Land Information Systems. But, current digitizing systems need too much time and cost digitizing about 720,000 cadastral maps. That's way we develop new digitization system for cadastral maps by using scanning and vectorizing methods. In this paper, we treat scanner test and vectorizing program that are the most important parts of new digitization system for cadastral maps. we analyze needs of Korean Cadastral Survey Corporation, and discuss algorithms and functions of developed programs. Using newly developed scanner test program, user could test various scanners, and use inexpensive scanner if it satisfy the accuracy needed. And vectorizing program will reduce much time and cost, because it is designed and customized practically to he adequate to cadastral maps and to improve work speed, accuracy and usage.

• Land and Housing Review
• /
• v.6 no.3
• /
• pp.147-152
• /
• 2015

Site coefficient and amplification factor of current domestic Seismic Design Code based on American Seismic Code, have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. By previous studies, the measured spectral acceleration of the result of dynamic centrifugal test and analysis was smaller than the design spectral acceleration for the period over 1.5 sec. Accordingly, in this study structural analysis and design using dynamic centrifugal test result for pile foundation were achieved, and the quantity of concrete and reinforcement of wall frame was compared with each other. Comparison results of cost using KBC the design spectral acceleration of SC, SD site and SDS, the quantity of reinforcement using SDS for SD site was 17~23% smaller than using the design code SD site.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.373-376
• /
• 2016

The Mini Parasep SF fecal parasite concentrator (MPSFC) is a new modification of the closed concentration system, which can easily be adopted in any routine clinical pathology laboratory. Here we describe our experience with the system in diagnosing Opisthorchis viverrini. A total of 199 fecal samples was submitted for routine examination in the clinical pathology laboratory of Suranaree University of Technology hospital, Nakhon Ratchasima province, Thailand, during August to October 2015. Out of all samples examined, 10 (5.03%) were positive with intestinal parasites including O. viverrini (2.01%), followed by Strongyloided stercoralis (1.51%), Hookworm (0.5%), Taenia spp. (0.5%), and Entamoeba coli (0.5%). Regarding the distribution of intestinal parasites in relation to the methods used, and found that 4 samples (2.01%) were positive using the direct wet smear method while 10 (5.03%) were positive with the Mini Parasep SF method; the difference was statistically significant ($X^2$-test = 116.506, p-value =0.001). Mean time for processing using the Parasep system was 6.03 min/sample, the conventional direct wet smear method at 0.3 min/sample. Cost per test, conventional direct wet smear method costing less than the Parasep method at USD 0.74/sample versus USD 1.47/sample. This first report of O. viverrini detection using MPSFC indicates that Parasep concentration test is useful in the routine laboratory, increasing the yield of parasites as compared to direct microscopy, but with greater processing time and cost. Further comparisons between the Parasep concentration test and common methods for O. viverrini detection are required, particularly concerning use in epidemiological surveys.

• Journal of Oriental Neuropsychiatry
• /
• v.25 no.4
• /
• pp.411-422
• /
• 2014

Objectives: A large number of patients require psychiatric therapy. We attempted to determine the present situation regarding psychotherapy and neuropsychological tests for dementia in Korean medicine for the benefit of the Health Insurance Review and Assessment Service (HIRAS). The aim of this study was to aware of the current status about psychotherapy and neuropsychological test for dementia in Korean medicine. Methods: We searched the medical practice records for psychotherapy and neuropsychological tests in oriental neuropsychiatry between 2009 and 2013 using the Health Insurance Review and Assessment Service (HIRAS) database. The search categories were: IJeongByunGi (Medical practice code:59001), JiUnGoRoen (59002), Kyungjapyungji (59003), OhJiSangSeung (59004), neuropsychological test for dementia (29005). Results: 1. The number of patients treated with Korean Medical Psychotherapy increased annually by 151%. The total number of patients treated with Korean Medical Psychotherapy was 4,289 in 2013. 2. The total cost for patients treated with Korean medical Psychotherapy in the public health medical insurance budget was 268,032,000 won in 2013. The average medical cost for one therapy was 17,000 won in 2013. 3. The number of patients in local clinics is increasing faster than the number in Korean medical hospitals. 4. The age group between 20~30 years of age, for both men and women, is the group with the greatest density in Korean Medical Psychotherapy. 5. Neuropsychological Testing for Dementia in Korean Medicine is slowly decreasing. Conclusions: The prevalence of mental illness in Korea is increasing, therefore, the demand for Korean Medical Psychotherapy has increased recently. Authorizing Korean Medical psychiatrists to utilize Korean mental Health resources is essential. This study could be helpful in understanding the current status for the purpose of expanding Korean Medical Psychotherapy.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.39-46
• /
• 2010

In 2007, Iowa department of transportation (DOT) initiated to run the falling weight deflectometer (FWD) network-level testing along Iowa highway and road systems and to build a comprehensive database of deflection data and subsequent structural analysis, which are used for detecting pavement structure failure, estimating expected life, and calculating overlay requirements over a desired design life. Iowa's current FWD networklevel testing protocol requires that pavements are tested at three-drop level with 8-deflection basin collected at each drop level. The test point is determined by the length of the tested pavement section. However, the current FWD network-level program could cover about 20% of Iowa's highway and road systems annually. Therefore, the current FWD network-level test protocol should be simplified to test more than 20% of Iowa's highway and road systems for the network-level test annually. The main objective of this research is to investigate if the minimum number of drop levels and test points could be reduced to increase the testing production rate and reduce the cost of testing and traffic control without sacrificing the quality of the FWD data. Based upon the limited FWD network-level test data of eighty-three composite pavement sections, there was no significant difference between the mean values of three different response parameters when the number of drop levels and test points were reduced from the current FWD network-level testing protocol. As a result, the production rate of FWD tests would increase and the cost of testing and traffic control would be decreased without sacrificing the quality of the FWD data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.86-96
• /
• 2000

The representative area among the ones whose cost increases as the integration ratio increases is the test area. As the relative cost of hardware decreases, the BIST method has been focued on as the future-oriented test method. The biggest drawback of it is the increasing test time to obtain the acceptable fault coverage. This paper proposed a BIST implementation method to reduce the test times. This method uses an input grouping and test point insertion method, in which the definition of test point is different from the previous one. That is, the test points are defined on the basis of the internal nodes which are the reference points of the input grouping and are merging points of the grouped signals. The main algorithms in the proposed method were implemented with C-language, and various circuits were used to apply the proposed method for experiment. The results showed that the test time could be reduced to at most $1/2^{40}$ of the pseudo-random pattern case and the fault coverage were also increased compared with the conventional BIST method. The relative hardware overhead of the proposed method to the circuit under test decreases as th e size of the circuit to be tested increases, and the delay overhead by the BIST utility is negligible compared to that of the original circuit. That means, the proposed method can be applied efficiently to large VLSI circuits.