• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.1-8
• /
• 2011

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. Gas welding is very important and useful technology in fabrication of an railroad car and vehicles structure. However fatigue strength of the gas welded joints is considerably lower than parent metal due to stress concentration at the weldment, fatigue strength evaluation of gas welded joints are very important to evaluate the reliability and durability of railroad cars and to establish a criterion of long life fatigue design. In this paper, ${\Delta}-N_f$ curve were obtained by fatigue tests. Using these results, the accelerated life test (ALT) is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of plug and ring gas welded joints and data analysis by statistical reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• Journal of the Korean Home Economics Association
• /
• v.41 no.4
• /
• pp.111-126
• /
• 2003

The purpose of this study was to investigate the clothing consumption pattern and satisfaction of the university students. 509 subjects were surveyed during the period of 2002, for statistical analysis, t-test, ANOVA(LSD), X²-test were used by SPSSWIN program. The results of this study were following; Number of clothing showed significant difference according to sex, income, and major Female students had more clothes than male students, but female student was not satisfied with thier number of clothing. University students spend the money below one hundred thousandwon on the purchase of clothing and they depend upon their parents for the cost. Their resources of fashion information are display of shop. Clothing consumption pattern showed significant difference according to sex and female students purchased on sale more frequently than male students. The needs of university students for formal wear was high. The reason for not wearing the clothes they have showed significant difference according sex, male students din't wear their clothes for ragging or unsuitableness of size but female students din't wear because thier clothes were old fashion or they lose interests in thier clothes. The tendency to have ethetic, easycare and high quality clothing of female student was stronger than that of male students. It is necessory business develop high quality formal wear at a low price, made in practical textiles and activative designed skirts for university students.

• Journal of ILASS-Korea
• /
• v.20 no.4
• /
• pp.247-253
• /
• 2015

Recently, the engine calibration technique has been much more complicated than that of the past engine case in order to satisfy the strict emission regulations. The current calibration method for the diesel engine which has an increasing market is both costly and time-consuming. New engine calibration method is required to develop for high-quality diesel engines with low cost and release it at the appropriate time. This study provides the optimal calibrating technique for complex engine systems using statistical modeling and numerical optimization. Firstly, it design a test plan based on Design of Experiments, a V-optimality methodology which is suitable looking for set-points, and determine the shape of test engine response. Secondly, it uses functions to make linear regression model for data analysis and optimization to fit the models of engines behavior. Finally, it generates the optimal calibrations obtained directly from empirical engine models using Grey Relational Analysis and compares the calibrations with data. This method can develop a process for systematically identifying the optimal balance of engine emissions.

• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.1025-1039
• /
• 2010

Measuring displacement response for civil structures is very important for assessing their performance, safety and integrity. Recently, video-based techniques that utilize low-cost high-resolution digital cameras have been developed for such an application. These techniques however have relatively low sampling frequency and the results are usually contaminated with noises. In this study, an integrated visual-inertial measurement method that combines a monocular videogrammetric displacement measurement technique and a collocated accelerometer is proposed for displacement and velocity measurement of civil engineering structures. The monocular videogrammetric technique extracts three-dimensional translation and rotation of a planar target from an image sequence recorded by one camera. The obtained displacement is then fused with acceleration measured from a collocated accelerometer using a multi-rate Kalman filter with smoothing technique. This data fusion not only can improve the accuracy and the frequency bandwidth of displacement measurement but also provide estimate for velocity. The proposed measurement technique is illustrated by a shake table test and a pedestrian bridge test. Results show that the fusion of displacement and acceleration can mitigate their respective limitations and produce more accurate displacement and velocity responses with a broader frequency bandwidth.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.5
• /
• pp.212-217
• /
• 2014

Recently, the use of renewable energy has been increased due to growing concern on the energy-saving at buildings and the reduction of $CO_2$ emission. In the field of architecture, to reduce the energy consumption of heating, cooling and hot water supply, heat pump systems with renewable energy has been developed and used in various applications. However, there have been many of researches on the large-scale commercial heat pump systems, but the research and the field application of a compact heat pump system is rare. Therefore, in order to develop the compact heat pump for the small-scale residential building, this study conducted the performance test and feasibility study for a hybrid heat pump using the heat source of air, solar and ground. In the results of experiments through a trial product, the average COP of cooling mode with ground heat source was 4.75, and it of heating mode was 4.03. Furthermore, the average COP of cooling mode with air heat source was 2.60, and it of heating mode was 2.92. Finally, payback period of the system was calculated as 9.2 years.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.776-781
• /
• 2008

A ground heat exchanger in a GSHP system is an important unit that determines the thermal performance of a system and its initial cost. The Size and performance of this heat exchanger is highly dependent on the thermal properties. A proper design requires certain site-specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This paper is part of a research project aiming at constructing a database of these site-specific properties, especially ground effective thermal conductivity. The objective was to develop and evaluation method, and to provide this knowledge to design engineers. To achieve these goals, thermal response tests were conducted using a testing device at nearly 150 locations in Korea. The in-situ thermal response is the temperature development over time when a known heating load imposed, e.g. by circulating a heat carrier fluid through the test exchangers. The line-source model was then applied to the response test data because of its simplicity. From the data analysis, the range of ground effective thermal conductivity at various sites is $1.5{\sim}4.0\;W$/mK. The results also show that the ground effective thermal conductivity varies with grouting materials as well as regional geological conditions and groundwater flow.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1955-1961
• /
• 2008

A lot of researches on a linear induction motor(LIM) have been advanced to realize a traction system with high efficiency and performance for railway transit for a long time. However, most of them are limited in design of a LIM part such as Primary and Secondary. At a LIM which is traveling, the change of an air-gap(It occurs by a construction tolerance of a secondary reaction plate) becomes the cause which decreases a smoother ride and the efficiency of railway transit system. Therefore, uniform air-gap operation of LIM is important issue to improve the system efficiency. However, the researches which control the air-gap length of the LIM with technical and high-cost problem have been not advanced a lot. Therefore, in this research, it is introduced an air-gap control system for performance test machine of a scale-downed LIM which is able to control the air-gap length of the LIM and monitor a variety of performance changes of the propulsion system, and conducted a research on feasibility of the system based on characteristic analysis.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.179-184
• /
• 2002

We consider the heterogeneous fleet vehicle routing problem (HVRP), a variant of the classical vehicle routing problem (VRP). The HVRP differs from the classical VRP in that it deals with a heterogeneous fleet of vehicles having various capacities, fixed costs, and variables costs. Therefore the HVRP is to find the fleet composition and a set of routes with minimum total cost. We give an integer programming formulation of the problem and propose an algorithm to solve it. Although the formulation has exponentially many variables, we can efficiently solve the linear programming relaxation of it by using the column generation technique. To generate profitable columns we solve a shortest path problem with capacity constraints using dynamic programming. After solving the linear programming relaxation, we apply a branch-and-bound procedure. We test the proposed algorithm on a set of benchmark instances. Test results show that the algorithm gives best-known solutions to almost all instances.

• Journal of the Korean housing association
• /
• v.4 no.2
• /
• pp.33-43
• /
• 1993

The purpose of this study is to support satisfaction for reasonable management method to elevate the enhancement of management attitude and the satisfaction of management state for Multi-family Housing. This study was intended to find out variables which influence on the satifaction and attitude of resident to the management of Apartment, and to investigate variables influencing on the satisfaction and attitude of resident to the management of Apartment. In this study, survey research method is employed. The sample is taken from 336 APT. resident's living in Seoul, from 13th of Sep. to 20th of Sep, in 1993. Used statistica] method are Frequency, Percentage, 1-test, One-way Anova, Duncan-test, Multip]e Regression. The major finding were as follows: 1) The work of management of Multi-family Housing was classified into three type ; a)administration management b) maintenance management c) community-life control. 2) The management attitude of Apartment inhabitant is very high, especially .the attitude of maintenance management is the higest. But they disagree with the raise of management cost necessary to maintenance management. 3) The satisfaction of administration management, maintenance management, community-life control management is all low in the management condition of Apartment.'1'he management method of present Apartment shows a little problem.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.8-14
• /
• 2015

Transmission of a tracked vehicle designed for multiple functions such as steering, gear-shifting, and braking is a core component of heavy vehicle to which the power is transferred based on combined technology of various gears, bearing, and fluid machineries. Robustness and durability of transmission, however, have been issued due to a large number of driving units and sub-components inside its body. Particularly, transmission housing is important structure which supports the transmission, and is made of aluminum alloy. Thus, structural robustness against such mechanical loading or vibration must be attained. Structural reliability evaluation through FEM analysis can save time and cost of the actual tests. In this study, structural evaluation is conducted on output housing of transmission, which is core component of tracked vehicle, using the simulation program. In addition, transmission dynamo test is performed to evaluate structural robustness of the output housing against the vibration which can be produced during the transmission operation.