• Communications for Statistical Applications and Methods
• /
• v.24 no.3
• /
• pp.241-254
• /
• 2017

Drawing a sample can be costly or time consuming in some studies. However, it may be possible to rank the sampling units according to some baseline auxiliary covariates, which are easily obtainable, and/or cost efficient. Ranked set sampling (RSS) is a method to achieve this goal. In this paper, we propose a modified approach of the RSS method to allocate units into an experimental study that compares L groups. Computer simulation estimates the empirical nominal values and the empirical power values for the test procedure of comparing L different groups using modified RSS based on the regression approach in analysis of covariance (ANCOVA) models. A comparison to simple random sampling (SRS) is made to demonstrate efficiency. The results indicate that the required sample sizes for a given precision are smaller under RSS than under SRS. The modified RSS protocol was applied to an experimental study. The experimental study was designed to obtain a better understanding of the pathways by which positive experiences (i.e., goal completion) contribute to higher levels of happiness, well-being, and life satisfaction. The use of the RSS method resulted in a cost reduction associated with smaller sample size without losing the precision of the analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3721-3725
• /
• 2010

In this paper, the cost-benefit analysis is used to compare policy alternatives on whether the Korea National Museum of Contemporary Art should be incorporated or not. Alternative 1 (Current State) is to remain as it is. Alternative 2 (Incorporation State) is to change its legal status from government agency into incorporation. To make the process of incorporating, some assumptions are introduced: (1) no labor workforce reductions, (2) wage increase, (3) keeping publicness. These assumptions reduce the resistance from worker and provides them incentives to accept the incorporating process. Those assumptions also reflect the direction of policy of the government. After estimating the net present values of each alternative, it turns out that the NPV of Alternative 2 (Incorporating State) is larger than that of Alternative 1 (Current State). This result holds after doing sensitivity test using different discount rates.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.186-193
• /
• 2018

Generally, it is difficult to operate moveable-weir due to the expensive cost of the facility management and manpower consumption. Also, when it is installed in a remote area, there is a problem that the cost of connection for power system increases as well as the operating cost. Therefore, this paper proposes an optimal design algorithm to replace an existing power system with an Eco-friendly power supply system for movable-weir using PCS, PV module and lithium-ion battery. Also, this paper proposes a modeling method of environment-friendly power supply system for a movable-weir based on the PSCAD/EMTDC S/W and implements 5[kW] prototype environment-friendly power supply system. As a result of the performance test using the S/W modeling and the prototype system, it is confirmed that the proposed system has stable characteristics in the independent operation mode and the interconnection mode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.548-553
• /
• 2013

EHPS(Electro-Hydraulic Power Steering) is a system to generate the steering operation force from the electric motor connected directly to the oil pump. To optimize the manufacturing cost and efficiency of the performance of the steering system is very important. Until now, the development of the hydraulic system is implemented by the field test which needs a significant time and cost. In this paper, flow measurement of an external gear pump is performed. Then using the experimental results, an approximate model expressed by flow rate characteristics is proposed to calculate the discharge flow rate. Proposed approximate model is verified by comparing with the experimental data and AMESim results. As the experimental data and AMESim results agree well, the approximate model data can be used as an alternative to highly cost experimental procedure.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2010

High VOC(Vehicle Operating Cost) is the main reason for the rehabilitation of paved road and VOC is composed of fuel consumption, lubricant oil consumption, parts consumption, etc. Fuel consumption is one of the largest components of VOC and the roughness of road represents the deterioration level of the road. For these reasons, the fuel consumption is measured for different IRI(International Roughness Index) in this study. The fuel consumption was measured by processing the voltage signal of fuel injector of vehicle and the speed was measured with GPS. The change rate of fuel consumption for different IRI can be calculated with the results of this test. It's concluded that fuel consumption(L/100km) of medium and large passenger car increases 7 times fast of the increase of IRI(m/km) around 3.5m/km in the speed range of 40 ~ 100km/h, and fuel consumption is the best at 60km/h.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.25-48
• /
• 1996

Mixed Model Assembly Lines (MMALs) are increasingly used to produce differentiated products on a single assembly line without work-in-process storage, Usually, a typical MMAL consists of a number of (1) stations doing exactly the same operation on every job, (2) stations involving operations with different choices, and (3) stations offering operations that are not performed on every job, or that are performed on every job but with many options. For stations of the first type there is no sequencing problem at all. However, for the second type a set-up cost is incurred each time the operation switches from one choice to another. At the third type of stations, different models, requring different amounts and choices of assembly work, creates an uneven flow of work along the line and variations in the work load at these stations. When a subsequence of jobs requires more work load than the station can handle, it is necessary to help the operations at the station or to complete the work elsewhere. Therefore, a schedule which minimize the sum of set-up cost and utility work cost is desired. So this study has developed Fixed Random Ordering Rule (FROR), Fixed Ascending Ordering Rule (FAOR), Fixed Descending Ordering Rule, and Extended NHR (ENHR). ENHR is to choose optimal color ordering of each batch with NHR, and to decide job sequence of the batch with it, too. As the result of experiments, ENHR was the best heuristic algorithm. NHR is a new heuristic rule in which only the minimum addition of violations from both partial sequence and unassigned sequence at every branch could be considered. And this is a heuristic sequencing rule for the third type of stations at MMAL. This study developed one more heuristic algorithm to test the performance of NHR, which is named as Practical Heuristic Rule (PHR).

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.5
• /
• pp.333-341
• /
• 2014

To supply substitution water, $2m^3$ of capacity of rainwater harvesting system is designed calculating rainfall, catchment area and LPCD and has a effects to 34.4% of substitution water supply and 237 days of service day. Rainwater of drinking water quality was judged to be suitable except for bacteria problem, however, groundwater is exceeded in nitrate nitrogen, the evaporation residue and also bacteria, which means that the rainwater is suitable for use as water supply. In addition, to consider cost-benefit ratio, economic analysis conducted. The result is that B/C ratio of RWHS (10 years) is 1.70. It means total benefit is bigger than cost. Except to social factor in this study, there are a variety of benefit such as flood or drought prevention, educational effects inspiring water conservation awareness.

• The Journal of Information Systems
• /
• v.25 no.3
• /
• pp.31-60
• /
• 2016

Purpose In 2016, the market size of mobile(m-) shopping goes beyeond more than half of a total of online shopping. People use smartphones as the main device for m-commerce. Under the circmustances, this study attempts to address why people prefer to use smartphone-based m-commerce. In other words, it is necessary to understand the main value that smartphone-based m-commerce creates. Drawing on the studies of consumption value, this study focuses on utilitarian value in predicting customers' continuance intention in the context of smartphone-based m-commerce, recognizing that utilitarian value is a key extrinsic motivation in the goal-oriented, performance-oriented shopping contexts. Furthermore, this study identifies factors affecting customers' utilitarian value from the perspective of benefits and costs, following the notion that it represents the result of evaluating a trade-off of benefits and costs caused by smartphone-based m commerce. More specifically, in this study, ubiquitous service, location-based service (LBS), transaction speed, and price utility belong to the benefit dimension, whereas technology anxiety and cognitive effort belong to the cost dimension. Design/methodology/approach To test the proposed hypotheses, the study conducted partial least squares (PLS) analysis with a total of 294 data collected on users with experience in smartphone-based m-commerce. Findings The results show that first, utilitarian value is increased by the benefits, such as ubiquitous service, transaction speed, and price utility. However, LBS has no direct effect on utilitarian value. Second, the noteworthy finding is that ubiquitous service and LBS greatly increase transaction speed. Third, technology anxiety and cognitive effort considered as the cost dimension are negatively associated with utilitarian value but their impacts on it are non-significant. Finally, the results support the argument that utilitarian value is a determinant of continuance intention. Overall, the findings imply that utilitarian value greatly depends on the peception on benefits rather than the aspect of cost in smartphone-based m-commerce. Overall, the findings offer new insight into the studies of m-commerce by considering and verifying the impacts of its benefits and costs simultaneously.

• The Journal of Society for e-Business Studies
• /
• v.12 no.4
• /
• pp.1-15
• /
• 2007

Traceability links are logical links between individual requirements and other system elements such as architecture descriptions, source code, and test cases. These are useful for requirements change impact analysis, requirements conflict analysis, and requirements consistency checking. However, establishing and maintaining traceability links places a big burden since complex systems have especially yield an enormous number of various artifacts. We propose a feature-oriented requirements tracing method to manage requirements with cost benefit analysis, including value consideration and intermediate catalysis using features. Our approach offers two contributions to the study of requirements tracing: (1)We introduce feature modeling as intermediate catalysis to generate traceability links between user requirements and implementation artifacts. (2)We provide value consideration with cost and efforts to identify traceability links based on prioritized requirements, thus assigning a granularity level to each feature. In this paper, we especially present the results of a case study which is carried out in Apartment Ubiquitous Platform to integrate and connect home services in an apartment complex in details.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.463-471
• /
• 2014

As building height and span is getting taller and longer, the researches to increase material's strength and serviceability are continuously performed. This study evaluated mechanical and chemical properties of newly developed high-strength steel (HSS) for building structures, namely HSA800 and verified cost-effectiveness and applicability of HSS for a tall building by comparing the analysis results of normal strength steel (SM490) model. HSA800 was manufactured by TMCP to have a good weldability in spite of HSS and satisfied Korean Industrial Standards (KS). The analysis results for evaluating cost-effectiveness show that total steel quantity could be saved approximately 30% when using HSS compared to SM490. It is expected that HSA800 will contribute to enhance constructability of building.