• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.187-192
• /
• 2010

Background and Objectives : LED(Light emitting diode) is recently introduced as a energy-saving light source in many area including agriculture and environment. In medical field it is known as bright and safe light source in surgical lighting including headlight. This study is aimed to test effectiveness and cost-saving of mountain-climbing headlight in comparison with xenon headlight. Materials and Methods : Internet market-available mountain-climbing headlight was compared with medical xenon headlight regarding heat generation after 30 minutes' usage, intensity of illumination and possible burn to the perioral skin. To get temperature data, 5 cases of tonsillectomy were done with the aid of LED headlight, while another 5 tonsillectomies were done using xenon headlight. Results : The temperatures of all light sources were below 45 degrees Celcius until finish of the surgery without burn or complications. No differences in operation time with both headlights. The maximal intensities of illumination were 24000 Lux for xenon, 20000 Lux for LED. Conclusion : Mountain-climbing headlight could be safe and helpful light source with low cost in simple oral surgery.

• Architectural research
• /
• v.7 no.1
• /
• pp.49-54
• /
• 2005

Conventional studies have focused on the reduction in the water-cement ratio, the use of various admixtures, etc., to ensure the durability of reinforced concrete structures against such deterioration factors as carbonation and chloride attack. However, improvement in the concrete quality alone is not considered sufficient or realistic for meeting the recent demand for a service life of over 100 years. This study intends to improve the durability of reinforced concrete structures by improvement in the reinforcing steel, which has remained untouched due to cost problems, through subtle adjustment of the steel components to keep the cost low. As a fundamental study on the performance of Cr-bearing rebars in steel reinforced concrete structures exposed to corrosive environments, The test specimens were made by installing 8 types of rebars in concretes with a chloride ion content of 0.3, 0.6, 1.2, 2.4 and $24kg/m^3$. Corrosion accelerated curing were then conducted with them. The corrosion resistance of Cr-bearing rebars was examined by measuring crack widths, half-cell potential, corrosion area and weight loss after 155 cycles of corrosion-accelerating curing. The results of the study showed that the corrosion resistance increased as the Cr content increased regardless of the content of chloride ions, and that the Cr-bearing rebars with a Cr content of 5% and 9% showed high corrosion resistance in concretes with a chloride ion content of 1.2 and $2.4kg/m^3$, respectively.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.12
• /
• pp.15-23
• /
• 2019

Purpose : We will develop the distribution method of wide oil extract technology to develop repellent using this technology and study mosquito repellent persistence. Research design, data and methodology : A positive control group containing purified water, ethanol and picaridin was prepared, and the experimental control group was prepared in the same proportion as the positive control group, and 0.6% of broad oil was added. The results were summarized using the calculation method according to the avoidance effect and statistically tested by t-test using the excel statistics program. Results : Experiments on skin surface area and voice control of participants showed that men had 8.9% wider skin surface area than women, and voice control tests showed that women were bitten by mosquitoes five times more than men. Both the positive and the experimental control groups had a valid duration of up to three hours, but from the time of five hours, the positive control group had 77% and the experimental control had 90%, indicating a difference of 14.4% over the positive control group. Conclusions : The mosquito repellents developed in this study on the basis of safety and continuity are cost-effective in terms of mosquito repellent, and in addition fragrance, odor removal, perfume, ink, skin care and massage effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.474-485
• /
• 2011

In this Study, the results of survey of evaluation cases on 10 GIS software were used as quality level index of GIS software in order to evaluate the quality of GIS (Geographic Information System) software. On the basis of such evaluation, analysis on the cost of improving the defectiveness accumulated of GIS software test cases was made. I am attempting to deduce the results that can be used assertively in promoting the justification for quality investment of enterprises or industrial units by quantitatively computing the cost essential in securing the quality by measuring the investment and effects on the quality through this.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.3011-3022
• /
• 2009

The analytic test results are as follows. This thesis categorized into independent variables, multiple factors, such as asset attributes, cost reduction expectation, corporate IT competence, service qualities, system adequacy, information security, easy system management, uncertain IT, supplier capacity, intra-industry competition. And, this research thesis categorized into moderators, the factor, such as the adequacy between suppliers and customers industries. And, this categorized into dependent variables, multiple factors, such as the effects of ASP introduction. But, it was analyzed that only cost reduction expectation out of independent variables had not positive effects on the effects of ASP introduction. And, it was confirmed that the higher communications between suppliers and customers' industries, and the higher fulfillment of contracts, suppliers' service qualities, and suppliers' cooperation with customers had the adjusting effects on factors of ASP-based introduction.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.779-788
• /
• 2020

Multi-Walled Carbon nanotubes (MWCNT) coupled with Silicone Rubber (SR) can represent applicable strain sensors with accessible materials, which result in good stretchability and great sensitivity. Employing these materials and given the fact that the combination of these two has been addressed in few studies, this study is trying to represent a low-cost, durable and stretchable strain sensor that can perform excellently in a high number of repeated cycles. Great stability was observed during the cyclic test after 2000 cycles. Ultrahigh sensitivity (GF>1227) along with good extensibility (ε>120%) was observed while testing the sensor at different strain rates and the various number of cycles. Further investigation is dedicated to sensor performance in the detection of human body movements. Not only the sensor performance in detecting the small strains like the vibrations on the throat was tested, but also the larger strains as observed in extension/bending of the muscle joints like knee were monitored and recorded. Bearing in mind the applicability and low-cost features, this sensor may become promising in skin-mountable devices to detect the human body motions.

• Environmental and Resource Economics Review
• /
• v.16 no.1
• /
• pp.171-197
• /
• 2007

In this paper we provide a methodology that permits test of feasibility of Porter hypothesis under limited data environment by utilizing two types of output distance function: Shephard distance function and directional distance function. The production technology supported by Porter hypothesis is embodied in the directional distance function. The average annual marginal abatement cost for $SO_2$ obtained by estimating the directional distance function is higher than the one obtained with the Shephard distance function by about 50 percent in the Korean electric power industry over the period 1970~1998. This result implies that feasibility of Porter hypothesis depends upon whether investment in production capital and process can bring more than a 50 percent increase in the average productivity.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2593-2602
• /
• 1972

Plastic pipes Wrapped with synthetic filter are recently used for drainage or Collecting of Underground water. But it's use is possible only for small size of diameter less than 300mm, because large size plastic pipes are not readily availabe. For large diameter infiltration gallery, porous concrete pipes are now used, but it's heavy weight brings difficulties in making, moving and setting of the pipes. With it's conventional method of filter setting, fine sands are brought into the pipes to make trouble to lifting pumps and channels Therefore, initial construction cost and maintenance cost become high. To solve-this problem, new method is developed and tested. Small PVC pipes(diameter 14mm) are assembled at the site of construction to newly devised I beam type circls. The size of circular inpiltration gallery is optionally determined by I beam type circle which support small PVC pipes and is made of PVC amterial. This gallery are wrappd with syntheitc filter to prevent sand instruction. In this test, the diameter of 300, 400, 500mm were used. I beam type circles were made with PVC plated with thickness. t=6, 9, 12mm. Water quantity collected through the PVC circulor gallery are measured and the strengths of the gallery. 1. Allowable setting depth of gallery pipe below graund for the case of t=6mm, D=500mm is 2.72m. 2. Collected water quantity depends on soil texture, depth of water grandient of water surface, filter material angle of setting etc. 3. About 126% of water quantity collected from the one gallery pipe measured in two gallery pipes of two parallel installation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.1
• /
• pp.119-126
• /
• 1993

We study a manufacturing process that is quite common in semiconductor wafer fabrication of semiconductor chip production. A machine is used to process a job consisting of J wafers. Each job requires a setup, and the i$_{th}$ setup for a job is sucessful with probability P$_{i}$. The setup is prone to failure, which results in the loss of expensive wafers. Therefore, a tiral run is first conducted on a small batch. If the set up is successful, the test is passed and the balance of the job can be processed. If the setup is unsuccessful, the exposed wafers are lost to scrap and the mask is realigned. The process then repeats on the balance of the job. We call this as send-ahead policy and consider general policies in which the number of wafers that are sent shead depend on the cost of the raw wafer, the sequence of success probabilities, and the balance of the job. We model this process and determine the expected number of good wafers per job,the expected time to process a job, and the long run average throughput. An algorithm to minimize the cost per good wafer subject to a demand constraint is provided.d.d.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.535-542
• /
• 2010

Various difficulties have been increased in the construction of public structure; like the road in the overcrowding urban area, because of civil complaint, cost and period of construction. In oder to overcome these social problems, the tunnel has been planned the road design. Despite the resolution, there are many technical problems when constructed near facilities. The design of new tunnel below the existing service reservoir is applied to the ambient vibration blasting using Plasma. The result of test blasting was exceeded the standard ("2kine"). So it was considered a countermeasure for the vibration reduction applied to change the controlled blasting method, reduce the charge, add the pre middle horizontal hole in the cut blasting site, and so on. The result was satisfied the standard. Accordingly, if the quality of blasting process can be managed well, the application of this alternative method is highly effective one. Also, based on cost analysis between two methods, the alternative method is very competitive.