• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.7-13
• /
• 2019

Recently, an automobile market used to natural gas has emerged as fast-growing as the several countries, who holds abundant natural fuel resources, has promoted to supply the national agency for an automobile car. LNG fuel vessel is more efficient in another way as the energy density is high, but it requires a high technology and investment to maintain extreme low temperature. CNG fuel vessel are relatively low-cost alternative to LNG, but poorly economical in terms of energy density as well as showing safety issues associated with compressed pressure. The development of adsorbed natural gas (ANG) has emerged as one of potential solutions. Therefore, it is desirable to reduce the weight of vessel by applying light-weighed a composite carbon fiber in order to response to the regulation of $CO_2$ emission. Herein, this study make the prototype ANG vessel not only based on the optimal design and analysis of material characteristic but also based on the shape design, and it suggest a new type for the composite carbon fiber vessel which verified functional test. Moreover, the detail shape design is analyzed by a finite element analysis, and its verifies the ANG vessel.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.3
• /
• pp.5-11
• /
• 2006

Two large diameter steel cased piles (TS-1 and TS-2) were installed and load-tested with the maximum load of 2000 ton at Kwang-An grand bridge. One of the test piles (TS-1) was socketed into the fresh rock and the other test pile (TS-2) was socketed into the weathered rock. Most loads were carried by the weathered rock layer at the maximum applied load for the test piles. In addition, numerical studies were performed using PENTAGON 3D and ROCKET. Based on this study, the weathered rock layer provided sufficient side resistances and possibility of an alternative embedded layer if weathered rocks are deeply layered over fresh rock, which caused difficulties and cost in construction.

• Strategy21
• /
• s.39
• /
• pp.5-46
• /
• 2016

North Korea's 4th nuclear test on Jan. 6 and following developments once again awakened the world into seriousness of the nuclear matters on the Korean peninsula. On March 2, UNSC adopted Resolution 2270 which is complemented by Seoul government's measures such as withdrawal from the Gaesung Industrial Complex (Feb. 9) and announcement of unilateral sanction (March 8). Seoul government also strongly urged the international community to strangle North Korea's 'financial resources.' The U.S., Japan, China, and other countries have issued unilateral sanctions to complement the UNSC measure. South Korea and the U.S. conducted their annual joint military drill (Resolve-Foal Eagle) in the largest-ever scale. North Korea, however, responded with demonstration of its nuclear capabilities and announcement of de facto 'nuclear-first' politics. North Korea test-fired a variety of delivery vehicles, threatened nuclear strikes against South Korea and the U.S., and declared itself as an 'invincible nuclear power armed with hydrogen bombs' at the 7th Workers 'Party Congress held in May, 2016. Considering the circumstantial evidences, the North's 4th nuclear test may have been a successful boosted fission bomb test. North Korea, and, if allowed to go on with its nuclear programs, will become a nuclear power armed with more than 50 nuclear weapons including hydrogen bombs. The North is already conducting nuclear blackmail strategy towards South Korea, and must be developing 'nuclear use' strategies. Accordingly, the most pressing challenge for the international community is to bring the North to 'real dialogue for denuclearization through powerful and consistent sanctions. Of course, China's cooperation is the key to success. In this situation, South Korea has urgent challenges on diplomacy and security fronts. A diplomatic challenge is how to lead China, which had shown dual attitudes between 'pressure and connivance' towards the North's nuclear matters pursuant to its military relations with the U.S, to participate in the sanctions consistently. A military one is how to offset the 'nuclear shadow effects' engendered by the North's nuclear blackmail and prevent its purposeful and non-purposeful use of nuclear weapons. Though South Korea's Ministry of Defense is currently spending a large portion of defense finance on preemption (kill-chain) and missile defense, they pose 'high cost and low efficiency' problems. For a 'low cost and high efficiency' of deterrence, South Korea needs to switch to a 'retaliation-centered' deterrence strategy. Though South Korea's response to the North's nuclear threat can theoretically be boiled down into dialogue, sanction and deterrence, now is the time to concentrate on strong sanction and determined deterrence since they are an inevitable mandatory course to destroy the North' nuclear-first delusion and bring it to a 'real denuclearization dialogue.'

• Journal of Family Resource Management and Policy Review
• /
• v.13 no.3
• /
• pp.181-205
• /
• 2009

The purpose of this study is to investigate some Influencing factors related to the wealth perception and property increase of 519 women in Seoul. The research was conducted from the end of February 15 to the beginning of January 20, 2009. The figures obtained were analyzed by frequency, percentage, mean, x-test, t-test, F-test, chi-square, and Duncan's F-test with SPSS pc+ The major findings of who study are summarized as follows: l.There were significant differences between the wealth recognition (economic plan affirmative and negative perception of wealth) for women according to social and psychological variables; economic plans have a higher value for married women, older women, those who have followed a postgraduate university course, those with higher income and expenditure, higher life satisfaction, and high and middle satisfaction with their economic life. In particular, economic plans varied significantly according to expectation of wealth in old age, and future economic prospects in the middle group. 2. Increased wealth and economic according to social and psychological variables (marital status, age, education, income, expenditure, life satisfaction, satisfaction with economic life, expectation of wealth in old age, future economic prospects) were shown to be associated with the following methods of increasing property: use of savings banks (p<.001) showed a rate of deposit of 20%-40% (p<.001) saving and thrift was a practice (p<001) that was related to the cost of living; and education expenditure (p<.001) as a property preparation period was exhibited in women aged 25-30 (p<.001). 3. There were significant differences in the recognition of wealth according to strategies for increasing wealth. There were no significant differences between mean of property acquisition and point of expenditure or the property preparation period in the perception of wealth. The related variables in rate of deposits were under 20% according to economic plan and negative wealth perception. In contrast, in the middle and high group, the economic plan and negative wealth perception were 20%-40% in relation to the rate of deposits. Variables related to the action of saving and thrift and property acquisition were practiced in the low and middle group of affirmative wealth recognition and the high group of negative wealth perception. The high group for wealthrecognition and the low group for wealthnegation exhibited little savings, thrift, and property accumulation. Those variables which point an expenditure the cost of living were education expenditure in all groups of negative wealth perception. The women in the study practiced more soundness economic planning according to their increased wealth and economic strategy. This study suggests that women should have positive wealth perception in their lives.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.143-154
• /
• 2012

The wireless low-floored tram is an innovative transportation system which is environment-friendly and highly energy-efficient. In addition, the system has various advantages such as low construction cost, improvement of urban landscape, revitalization of surrounding commercial area, elevated convenience for passengers, etc. Therefore, more than ten local governments have proposed tram construction projects in Korea. Accordingly, many research and development projects are ongoing funded by government including the developments of tram vehicle, tram trackway, signal system, etc. The embedded rail system are commonly used in order to provide leveled roadway surface in urban area. It is effective to reduce the noise and vibration, caused at the interface between the wheel and track, to minimize the construction period, and to lower the maintenance cost. This paper investigated the design and construction processes for tram trackway and figured out the constructability for the test track with embedded rail system for the first time in Korea. The performance to reduce the noise and vibration were quantitatively measured in the test track with embedded rail system. In addition, the results were compared to the ones for track with conventional rail system.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.7-14
• /
• 2005

This paper describes development of automatic flight control system for an unmanned target drone. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed. The performance of automatic flight control system is verified by flight test.

• Journal of Technology Innovation
• /
• v.11 no.1
• /
• pp.79-97
• /
• 2003

R&D expenditure of Korean firms has been increasing drastically since 1980 and occupied 84% of total R&D expenditure in 1994. After 1994, however, the growth rate of industry R&D expenditure has dropped below single digit. R&D concentration rate of upper 20 companies declined from 61.9% in 1999 to 49.8% in 2001. The technology trade balance has diverged by 2.8 billion dollars in 2000 compared to around 0.3 billion dollars in 1985. We find several reasons on declining the industry R&D growth rate in Korea. First, we carefully say there might be an crowding out effect in increasing government R&D investment from Granger causality test between industry R&D and government R&D. Second, the decreasing benefit of tax credit since 1992 on industry R&D expenditure has caused the decrease of industry R&D growth rate. Third, the type of R&D cost becomes to similar to matured countries type of cost, which means the portion of capital expenditure has been decreased since late of 1980s. Therefore, industry R&D growth rate gets to saturation point. We draw several policy implications from the changing structure of business R&D of Korean company. Firstly, to stimulate industry R&D investment Korean government needs to strengthen tax credit policy. Secondly, to induce foreign direct investment Korean government needs to establish technology infrastructures and high quality of manpower. To utilize foreign technology resources Korean government need to introduce global R&D program executed by foreign scientist as an Project Leader.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2015

The industry has rapidly growth and energy supply technology advanced are become main factor which to contribute of the harmonic losses. This problem is one aspect that may affect the capability of the transmission line and also to the efficiency of electricity. This paper proposes a new scheme to allocate the cost pertaining to transmission loss due to harmonics. The proposed method, called as Generalized Harmonic Distribution Factor, uses the principle of proportional sharing method to allocate the losses among the transmission users especially for industry consumers. The IEEE 14- and 30 bus test system is used to compare the proposed method with existing method. The results showed that the proposed method provided a scheme better in allocating the cost of transmission loss, which could encourage the users to minimize the losses.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.82.1-82.1
• /
• 2010

Recently, Molten carbonate fuel cells(MCFCs) have been developing to get a good durability and economic feasibility for commercialization. To achieve these objectives, the cost of nickel based electrodes should be reduced. Regular anode thickness used in MCFCs is normally 0.7mm. Thus, in our study, the purpose was to reduce anode thickness up to 0.3 mm keeping MCFC performance on standard levels. In-situ sintering has been used, with 2 different fabrication methods (method A and B) and 2 different supports (support 1 and 2). Voltage losses at different temperature (600,620,640,$650^{\circ}C$) and after 1000 hours showed the higher performance that can be obtained using method B and support 2. After single cell test, an open-circuit voltage(OCV) of 1.075 V and a closed-circuit voltage(CCV) of 0.829V were obtained, at current density of $150mV/cm^2$. Also the voltage loss ratio at different cell temperature was lower in the case of method B and support 2. According to these results, the cost of anode fabrication can be reduced in the future, contributing for the economical feasibility of MCFCs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1945-1948
• /
• 2004

This paper describes the design and construction of a micro robotic system addressing such important aspects as versatility and low cost for rapid development and test of new control algorithm. The design and structure of micro robots are presented in detail. The supervision oriented concept is designed for controlling a group of micro robots. In this concept, the vision system recognizes the environment and the host computer decides the micro robot action based on the information from the vision system. In addition, the micro robots can be implemented cheaply and small in size because the structure of supervision oriented system is simplest. The experimental results and the performance of the proposed micro robotic system are discussed.