• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.129-137
• /
• 2004

A small size - low priced supersonic wind tunnel of which test section size is 30mm by 35.6mm and run time is 20sec is developed. This educational supersonic wind tunnel is an intermittent blowdown type with an exchangeable nozzle block. In this study, the proper sized and low priced commercial parts are used to reduce the total cost of supersonic wind tunnel. A nozzle design and small supersonic wind tunnel design process has been established, and it is confirmed that a given supersonic flow field has been obtained and proved by experiment.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2298-2306
• /
• 2017

A PMS (Power Management System) controls vessel's power systems to improve the system efficiency and to protect a blackout condition. The PMS should be developed with considering the type and the capacity of the vessel's power system. It is necessary to test the PMS functions developed for vessel's safe operations under various sailing situations. Therefore, the function tests in cooperation with practical power systems are required in the PMS development. In this paper, a hardware-in-the-loop (HIL) simulator is developed for the purposes of the PMS function tests. The HIL simulator can be more cost-effective, more time-saved, easier to reproduce, and safer beyond the normal operating range than conventional off-line simulators, especially at early stages in development processes or during fault tests. Vessel's power system model is developed by using a MATLAB/SIMULINK software and by communicating between an OPAL-RT's OP5600 simulator. The PMS uses a Modbus communication protocol implemented using LabVIEW software. Representative tests of the PMS functions are performed to verify the validity of the proposed HIL-based test platform.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2375-2380
• /
• 2013

In this paper, we have implemented the unified fuel heater and performance evaluation system for diesel cars. In order to strengthen an engine starting of diesel car, we need to assembly the fuel filter and heater. Especially, this assembly fuel heater is very important in winter, it is necessary for heating to operate the diesel engine. The heater for unifying the sensor and heater body can advance the performance of car and reduce the production cost. Finally, the performance test chamber is needed to evaluate the performance of heater.

• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.618-620
• /
• 2017

Currently, IoT mobile applications are growing fast in number and complexity. As a result, the applications quality issue became crucial, hence to ensure their quality a proper testing is highly required. Testing such mobile applications is always tedious, time-consuming and expensive. To cope with these issues, we propose a testing approach using activity diagram with data flow information. The main functionality of IoT applications is exposing the meaningful data obtained from the sensors to the users by doing a lot of analysis, comparison, and computation. Therefore, our focus is on identifying and selecting the most appropriate paths at which calculation is taking place and the paths at which predicate exists. In our case study, we have used a real-world IoT mobile application and identified a total of ten test paths with two predicate uses and two computation uses through an example. With applying only this four critical paths, we can adequately test the application's core functionalities while significantly reduce the testing effort and cost.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.103-109
• /
• 2014

This paper represents the s-cam manufacturing process with the high-carbon steel like S45C using laser welding system. Laser welding of the high-carbon steel is generally difficult because of hardening of the weld zone. Also, existing s-cam manufacturing process, electric resistance welding system, have some problems like increase of production and development cost. To solve those problems, we are introduced the laser welding system with the pre-heating system for precision welding of s-cam with separated shaft and cam part. S-cam manufactured with optimum laser welding conditions is verified the performance like tensile strength, torsional strength and fatigue test. Strength and fatigue test results are described.

• Journal of Biomedical Engineering Research
• /
• v.32 no.1
• /
• pp.32-36
• /
• 2011

The insufflators in endoscopic surgery supply carbon dioxide to make the air-filled cavity in the abdomen. It contains many kinds of pneumatic and electronic parts and they are connected with the air tubes and electrical wires. The printed circuit boards (PCB) perform wiring, holding and cooling tasks in electronic systems. In this study, the PCB is used as the air channel for insufflators to decrease the cost, volume, and the malfunction according to aging of the device. Three layers of PCB made of FR4 are combined with prepreg as adhesive which has the internal airway channel according to the design. By mounting the pressure sensors and valves, the PCB based fluidic system is implemented. After calibration of flow sensor, the flow rate of the gas also can be measured. The climate test, temperature test, and biocompatibility test showed this idea can be used in insufflators for laparoscopic surgery.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.26-37
• /
• 2007

A virtual engine test based on "Numerical test cell" can extremely reduce the time and cost for the development of a hardware by coupling multidisciplinary analysis. This paper introduces the development activities of full engine simulation programs in U.S.A. and Europe, with the their related techniques(the engineering models, the simulation environment and high performance computing) based on the NPSS(Numerical Propulsion System Simulation). NASA Glenn research conte. leads the development efforts of NPSS by assembling the current codes and improving their Auctions. VIVACE(Value Improvement through a Virtual Aeronautical Collaborative Enterprise), a consortium of universities, research centers and companies in Europe, is developing the PROOSIS(PRopulsion Object Oriented Simulation Software). The capability for the domestic development is also estimated by surveying the current status.

• Women's Health Nursing
• /
• v.18 no.3
• /
• pp.200-208
• /
• 2012

Purpose: This study was aimed to examine the gap between predicted cesarean section rate and real cesarean section rate and it's determining factors of 44 tertiary hospitals. Method: This study is a cross-sectional analysis using the data of 25,623 deliveries in 2009 drawn from homepage of Health Insurance Review and Assessment Service. Data were analyzed with t-test, F-test, Scheff$\acute{e}$ test, and logistic regression. Result: There were statistically significant differences in the gap of cesarean section rate (more gap indicates higher quality of delivery) by grade of nurse staffing and delivery cases. Hospitals with nurse staffing grade 1 to 2 had more possibility to be classified into higher grade in quality of delivery (OR 5.67, 95% CI 1.07-30.08). Also hospitals with over 500 delivery cases had more possibility be classified into higher grade in quality of delivery (OR 4.92, 95% CI 1.14-21.23, respectively). Conclusion: The finding suggests that grade of nurse staffing may influence the real cesarean section rate because nurses do a vital role to prevent unnecessary cesarean section. Further study is required to provide evidence that nurse staffing influence on patient outcome and cost-effectiveness in order to obtain adequate number of nursing staffs.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.2
• /
• pp.36-46
• /
• 2012

Structure Insulated Panel (SIP) is an wooden structure material with which structure and insulation functions are satisfied. Hence, it would be a cost-effective model to implement low energy house which has higher insulation and structure performance and which the wall thickness is able to be reduced. In this study, performance of thermal insulation and fire resistance were evaluated in order to verify applicability to low energy house. Fire resistance test is performed on vertical load bearing members for partitions, and the test results satisfy one hour of fire resistance condition according to KS F 2257. The members include two layers of fireproof gypsum board with thicknesses of 12.5mm attached to SIP. Thermal insulation performance is satisfied with the 2012 standard ($0.225W/m^2{\cdot}K$). As the performance of resistance and thermal insulation are satisfied, SIP is expected to be applied to low energy building materials. In the future, the structural safety will be confirmed by structural performance and seismic performance test and the guidelines for distribution will be drawn up.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.30-37
• /
• 2012

This paper presents the performance investigation and design technology of a Line Start-up Permanent Magnet Synchronous Motor (LSPMSM) with super premium efficiency, including a design consideration and evaluation for motor start-up, key performance, and advanced finite element analysis FEA) for the design, improvement and verification, prototype build and test, design and test data comparison with a $Premium^{(R)}$ Efficient Induction Motor (PEIM). To assess the design technology, the LSPMSM prototype was built amended from a PEIM with the same frame, stator punching and rated output. Based on the prototype test, two novel design improvements and analyses have been done to eliminate noise and vibration. Additionally, the comparisons with the PEIM on the power factor, efficiency, frame size and active material consumption indicated that a significant performance improvement and active material cost reduction can be achieved by the LSPMSM.