• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.640-645
• /
• 2016

The objective of this study was to evaluate the present conventional selection program of a swine nucleus farm and compare it with a new selection strategy employing genomic enhanced breeding value (GEBV) as the selection criteria. The ZPLAN+ software was employed to calculate and compare the genetic gain, total cost, return and profit of each selection strategy. The first strategy reflected the current conventional breeding program, which was a progeny test system (CS). The second strategy was a selection scheme based strictly on genomic information (GS1). The third scenario was the same as GS1, but the selection by GEBV was further supplemented by the performance test (GS2). The last scenario was a mixture of genomic information and progeny tests (GS3). The results showed that the accuracy of the selection index of young boars of GS1 was 26% higher than that of CS. On the other hand, both GS2 and GS3 gave 31% higher accuracy than CS for young boars. The annual monetary genetic gain of GS1, GS2 and GS3 was 10%, 12%, and 11% higher, respectively, than that of CS. As expected, the discounted costs of genomic selection strategies were higher than those of CS. The costs of GS1, GS2 and GS3 were 35%, 73%, and 89% higher than those of CS, respectively, assuming a genotyping cost of $120. As a result, the discounted profit per animal of GS1 and GS2 was 8% and 2% higher, respectively, than that of CS while GS3 was 6% lower. Comparison among genomic breeding scenarios revealed that GS1 was more profitable than GS2 and GS3. The genomic selection schemes, especially GS1 and GS2, were clearly superior to the conventional scheme in terms of monetary genetic gain and profit.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.29-37
• /
• 2015

In this study, the estimation of axial load and total axial load was conducted using Bridge Weigh-in-Motion(BWIM) technique which generally consists of devices for measuring the strain induced in the bridge by the vehicles. axle detectors for collecting information on vehicle velocity and axle spacing. and data acquisition equipment. Vehicle driving test for the development of the BWIM system is necessary but it needs much cost and time. In addition, it demands various driving conditions for the test. Thus, we need a numerical-simulation method for resolving the cost and time problems of vehicle driving tests, and a way of measuring bridge response according to various driving conditions. Using a bridge model reflecting the dynamic characteristic contributes to increased accuracy in numerical simulation. In this paper, we conduct a numerical simulation which reflects the dynamic characteristic of a bridge using the Bridge Weigh-in-Motion technique, and suggest overload vehicle enforcement technology.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.270-275
• /
• 2012

This paper presents a portable and compact optical device which can conveniently be used to perform a functional analysis of human liver function. The proposed system employed red/green LEDs, as a light source, and CMOS image sensor, which is commonly used in cellular phones. With this system, several blood serum samples have been evaluated for liver functional analysis by measuring light absorption level through the blood serum samples depending on aspartate aminotransferase (AST), alanine aminotransferase (ALT), and total bilirubin concentration. The light absorption through the blood serum samples containing AST, ALT, or total bilirubin can provide their concentrations. The green light absorption is more sensitive to the concentration of AST or ALT, and the red light absorption is more sensitive to the total bilirubuin concentration. Additional calibration steps were performed by using a MATLAB program in order to eliminate the light scattering effects from the extraneous particles existing in each blood serum sample. From the blind test, three standard light intensity curves through each enzyme have been obtained and the enzyme concentration values have been compared to those obtained from a commercially available biochemistry analyzer (Toshiba 200 FR). The average percent difference in the obtained concentrations from two systems for AST, ALT, and total bilirubin concentration came out to be 7.79%, 7.98%. and 7.56%, respectively, with the adjusted coefficient of determination (R2) higher than 0.98. This system can possibly lead to a low-cost and simple system that can be used as a point-of-care (POC) system in a condition without advanced equipments.

• Quality Improvement in Health Care
• /
• v.7 no.1
• /
• pp.60-70
• /
• 2000

Background : The aim of this study was to examine the effectiveness of the critical pathway to diabetic patients who were admitted in the hospital. Methods : For establishment of critical pathway for diabetic patients, we organized the multidisciplinary care team. During 5 months, 31 diabetic inpatients were applied the critical pathway and the results were compared with 11 diabetic inpatients who were treated with conventional way. We assessed the patients satisfaction, knowledge on the disease, compliance of medical regimen, length of stay(LOS) and hospital cost. We used the computer program SAS for statistical analysis. Data were summarized with mean, and analyzed using t-test repeated measures ANOVA and Wilcoxon rank sum test. Results : Length of stay(LOS) was remarkably shortened in critical pathway group compared with the conventional treatment group($7.6{\pm}1.23$ vs $12.0{\pm}4.73$, p<0.000). Although LOS was significantly shortened in critical pathway group, patients satisfaction was much higher than conventional treatment group. There were no significant difference of knowledge on the disease, compliance of medical regimen and blood glucose level between two groups at discharge. Hospital cost of each patients also significantly decreased in critical pathway group(890,000 won vs 1,280,000 won, p<0.05). Conclusion : These results showed that establishment of critical pathway for diabetic inpatients with team approach is the one of the way to improve the quality of diabetic patients management and to enhance the efficiency of hospital management.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.169.1-169.1
• /
• 2010

Geothermal heat pump(GHP)system has been extensively disseminated due to the recent increasing demand over new and renewable energy. However, the economics and system reliability has been key issues and barriers to insure a better system performance as designed originally. The building integrated designs of geothermal heat pump system are test and optimize GHP system by evaluating its performance in virtual reality. System design is an iterative process that will help optimize the cost efficiency of the system. One of the primary goals is to minimize the energy imbalance between the amount of energy extracted from the ground and the energy reject to it. This will reduce the land area required to install the GHX, reduce the cost of installing it and ensure the long-term efficiency of the system. Commissioning is the process of ensuring that are designed, installed, functionally tested, and capable of being operated and maintained to performance in conformity with design intent. In this paper, Study on introduction of Initial commissioning method of Geothermal Heat Pump(GHP) system using ISO performance data has been introduced. Also KIER GHP Simulator is used to simulate actual heat pimp operating condition and test commissioning method. Result should that the experiment data base could verify the applicability of the commissioning method, and also were able to suggest a better ways to GHP commissioning.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.594-600
• /
• 2017

HVDC transmission systems can be configured in many ways to take into account cost, flexibility and operational requirements. [1] For long-distance transmission, HVDC systems may be less expensive and suffer lower electrical losses. For underwater power cables, HVDC avoids the heavy currents required to charge and discharge the cable capacitance of each cycle. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may still be warranted, due to other benefits of direct current links. HVDC allows power transmission between unsynchronized AC transmission systems. Since the power flow through an HVDC link can be controlled independently of the phase angle between the source and the load, it can stabilize a network against disturbances due to rapid changes in power. HVDC also allows the transfer of power between grid systems running at different frequencies, such as 50 Hz and 60 Hz. This improves the stability and economy of each grid, by allowing the exchange of power between incompatible networks. This paper proposed to establish Korean HVDC technology through a cooperative agreement between KEPCO and LSIS in 2010. During the first stage (2012), a design of the ${\pm}80kV$ 60MW HVDC bipole system was created by both KEPCO and LSIS. The HVDC system was constructed and an operation test was completed in December 2012. During the second stage, the pole#2 system was fully replaced with components that LSIS had recently developed. LSIS also successfully completed the operation test. (2014.3)

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.73-82
• /
• 2006

Nowadays, the general stripping work of form has brought some problems; increase of total constructing cost resulted from the man-dependent form work procedure and environmental issues by wasting the debonded form. In this study, to effectively reduce unnecessary cost and resolve the environmental problems caused by these kinds of reason, a permanent form method using stainless steel fiber was introduced then its material and structural characteristics were evaluated. In the case of material characteristic, the permanent form had a good ductile behavior in the result of flexural test of the permanent form panel and pull-out test of insert bolt which is installed in the permanent form and perfect bonding capacity with a field concrete. In the case of structural characteristic, compressive and tensile behavior of the permanent form was evaluated. It also showed a good structural behavior in the view of load-deflection relationship, crack patterns and additional strengthening effect.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.11-19
• /
• 1999

The design procedure as well as some test results of a low-cost commercial radome for mobile DBS(Direct Broadcasting Satellite) receiving antenna system are presented in this paper. At first the complex permittivity of dielectric material should be measured in order to select a material for radome design. The complex permittivities of low-cost plastics supplied by domestic vendors are measured and presented. And then the transmission losses of the sheets are calculated. The calculated results are verified by the measurements of wave transmission test of that sheets. Two kinds of radomes, ABS single-layer and A-Sandwich((PET-Foam-ABS), are fabricated and measured practically. The transmission losses of single-layer and A-sandwich radome are 1.5dB and 0.6dB respectively at the maximum wave incident angle of 57 degree. Also the calculated crosspolarization caused by A-sandwich radome is under 20dB.

• Korean journal of food and cookery science
• /
• v.14 no.1
• /
• pp.76-83
• /
• 1998

The purpose of this study was to evaluate the foodservice management practices and productivity in elementary schools in order to provide basic information for an efficient food service management. This approach was achieved using a variety quantitative and qualitative information including general foodservice management, managerial and operational factors, and the productivity in elementary school foodservice systems. The labor productivity in 28 school foodservice system was assessed and related to a number of influencing variables within the system. The productivity measurement was based upon the total meal equivalents as a ratio of the total direct and non-direct labor hours required to prepare these meals. Twenty-eight elementary schools located in Seoul and Kangnung were surveyed to get data for the variables. Questionnaire and a survey form were mailed. Statistical methods used in this study were descriptive analysis, $\chi$$^2$-test, 1-test and one-way ANOVA analysis. Elementary schools in Seoul were all located in urban areas, whereas elementary schools in Kangnung were in urban areas (40.0%), provincial areas (40.0%) and in isolated areas (20.0%). Total average number of meals including children and staff was 928.2${\pm}$ 650.0 with a yery significant difference (p<0.001) between Seoul and Kangnung. The average cost of school meal in Seoul and Kangnung were 1191.0 won and 1526.2 won, respectively. The result of Pearson Correlation analysis indicated that labor cost per meal, 1-week meal equivalents and meal equivalents per labor were significantly correlated with the productivity.

• Journal of Distribution Research
• /
• v.11 no.1
• /
• pp.69-97
• /
• 2006

This research aimed to establish and test a empirical model for antecedents and consequences of manufacturer's degree of channel concentration in multiple channels from strategic perspective. For this purpose, I suggested new concept of channel concentration based on related literature review and developed the measurement index of channel concentration. Second, I examined and applied the transaction cost theory and market power theory to provide broad understanding of multiple channel structure and to explain it. Finally, I present the theoretical and managerial implications to the firms that build up channel strategy under multiple channel contexts on this research results. For the purpose of these goals, eight hypotheses were drawn from the previous researches. To verify these hypotheses, 248 data were collected as samples, and the data were tested by reliability test, factor analysis, and covariance structure analysis. Empirical findings strongly support that strategic management of distribution channel especially are important in multiple channels. The overall implications to researchers and practitioners are presented, and limits and further study direction were discussed as a final.