• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.703-711
• /
• 2016

The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.

• Journal of Haehwa Medicine
• /
• v.15 no.2
• /
• pp.1-7
• /
• 2006

Objectives : Comparison acupuncture treatment with Acupuncture & Moxibustion combined treatment for frozen shoulder 20 case patients Methods : Efficacy evaluation using Apley scratch test(ROM), Martin.A.N'Improvement rate Results : 1. Acupuncture & Moxibustion combined treatment group were better than acupuncture treatment group in Martin.A.N' Improvement rate. 2. Acupuncture & Moxibustion combined treatment group were better than acupuncture treatment group in Apley scratch test(ROM). but this study need to many case frozen shoulder investigation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.264-268
• /
• 2007

This article presents the performance evaluation case study of circuit-switched WCDMA R5MSC(Mobile Switching Center) Server and CS-MGW(Circuit Switched Media Gateway) in 3'rd generation mobile telecommunication (UMTS : Universal Mobile Telecommunication System). The presented work adopted circuit switching scenarios recommended by 3GPP(Third Generation Partnership Project) and terrestrial spectrum calculation parameters and its values defined in ITU-R M.2023 and M.1390 to do the case study on performance evaluation of circuit switched system (R5 MSC Server and CS-MGW) in WCDMA core network. This paper describes test results by using simulator which substitutes for wireless section (MS, Node-B, RNC).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.20-27
• /
• 2001

The purpose of this study is to investigate and compare the validity and the reliability of the visual simulation method using the internet. For this. the evaluation of the artificial and natural landscape through the medium of color slides are compared with the internet survey. Data is analysed through the comparison of t-test between the two media by landscape type, and spatial image is analysed by factor analysis algorithm. Principle component analysis using Varimax Method is applied for extraction and factor rotation respectively. The results of this study can be summarized as follows; There are no statistical differences between the two methods with artificial and natural landscape in the total data that included second tests. Factors covering the spatial image are found to be \`aesthetic\`, \`spatial shape\`, and \`familiarity\`. Total variance is obtained as 66.4%. There are no statistical differences between the two methods in 2/3 of the cases. In the case of far view of artificial landscape, the results of the t-test show that the two methods are exactly the same. Especially in the case of the artificial far landscape shows no difference of all factors between two methods. There are no differences between first and second tests of the same media and the same landscape type. And it shows the reliability of this method. These results suggest that the probability that the internet can be used as a medium of landscape evaluation and gathering information on anyone\`s landscape image. Simulation techniques with the internet survey method should be further developed for practical application.

• Toxicological Research
• /
• v.18 no.3
• /
• pp.267-273
• /
• 2002

Fructose 1,6-diphosphate(FDP), a glycolytic metabolite, is reported to ameliorate inflammation and inhibit the nitric oxide production in murine macrophages stimulated with endotoxin. It is also reported that FDP has cytoprotective effects against hypoxia or ischemia/reperfusion injury in brain and heart, and may play a protective role in ultraviolet B (UVB, 280~320 nm)-injured keratinocyte by attenuating prostaglandin (PG)-E$_2$production and cyclooxygenase (COX)-2 expression, which are possibly through blocking the intracellular reactive oxygen species (ROS) accumulation. Therefore FDP is considered to act as a potent antioxidant especially in the skin. We conducted the several safety tests (single-dose toxicity, primary skin irritation test, eye irritation test, skin sensitization test, phototoxicity test, photosenitization test and human patch test) to see if FDP is safe in case used for the skin application. Our data obtained hitherto suggest that FDP is very safe if applied to the skin.

• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.90-100
• /
• 2015

Reliability growth rate (or reliability growth curve slope) have the two cases of trend as a constant or changing one during the reliability growth testing. The changing case is very common situation. The reasons of reliability growth rate changing are that the failures to follow the NHPP (None-Homogeneous Poisson Process), and the solutions implemented during test to break out other problems or not to take out all of the root cause permanently. If the changing were big, the "Goodness of Fit (GOF)" of reliability growth curve to test data would be very low and then reduce the accuracy of assessing result with test data. In this research, we are using Duane model and AMSAA model for assessing test data and projecting the reliability level of complex and repairable system as like construction equipment and vehicle. In case of no changing in reliability growth rate, it is reasonable for reliability engineer to implement the original Duane model (1964) and Crow-AMSAA model (1975) for the assessment and projection activity. However, in case of reliability growth rate changing, it is necessary to find the method to increase the "GOF" of reliability growth curves to test data. To increase GOF of reliability growth curves, it is necessary to find the proper parameter calculation method of interesting reliability growth models that are applicable to the situation of reliability growth rate changing. Since the Duane and AMSAA models have a characteristic to get more strong influence from the initial test (or failure) data than the latest one, the both models have a limitation to contain the latest test data information that is more important and better to assess test data in view of accuracy, especially when the reliability growth rate changing. The main objective of this research is to find the parameter calculation method to reflect the latest test data in the case of reliability growth rate changing. According to my experience in vehicle and construction equipment developments over 18 years, over the 90% in the total development cases are with such changing during the developing test. The objective of this research was to develop the newly assessing method and the process for GOF level increasing in case of reliability growth rate changing that would contribute to achieve more accurate assessing and projecting result. We also developed the new evaluation method for GOF that are applicable to the both models as Duane and AMSAA, so it is possible to compare it between models and check the effectiveness of new parameter calculation methods in any interesting situation. These research results can reduce the decision error for development process and business control with the accurately assessing and projecting result.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.51-60
• /
• 2013

With the recent changes in the environment of weapon systems acquisition, the systems development is becoming more susceptible to a variety of risks. To cope with this situation, US DoD has been emphasizing the importance of constantly applying the test and evaluation (T&E) process throughout the whole life cycle of the weapon systems. In particular, the safety requirements are called for attention while dealing with system risks. To this end, the present paper is aimed at studying the T&E process which incorporates the systems safety in weapon systems development. Analyzing and modeling the relevant processes has made it possible to achieve the objective. As a case study, the model results were applied to the development of unmanned aerial vehicles.

• Journal of the Korean Society of Safety
• /
• v.7 no.3
• /
• pp.73-82
• /
• 1992

This paper was concerned with the risk evaluation of oxidizing substances by burning test method. The samples were prepared the heaped cone-shaped mixtures of solid oxidizing sub-stance with sawdust, and ignition of the sample was made on contact with heating wire inside the combution chamber that the temperature and humidity of atmosphere can be kept at $25^{\circ}C$ and 60% respectively. Accordingly, it were measured the combustivity effect of mixing ratio and amount of sample weight on the burning rate. As a result of burning test of these samples, it could be noticed that the case when the sawdust has so and 30 wt.% in the mixing ratio shows effective combustivity, and as the amount of sample weight was increasing, It showed more rapid burning time. So the average burning time could be obtained by considering the weighting factors to the parameters of the mixing ratio and the amount of sample weight. Finally, it was compared with the effects of cation and anion of oxidizing substances and also applied analytically to the classification and evaluation of oxidizing sub-stances as dangerous goods.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.10-13
• /
• 2008

Fuel cell systems have witnessed remarkable development in recent years as they offer a clean and efficient alternative for power generation. Testing was conducted to determine the safety performance of a residential fuel cell system when subjected to abnormal operation condition, especially for voltage sag and fuel cut. In case of voltage sag to 198V, its arriving time at rated power had shown a slight lag but there wasn't any noticeable change when operating it between rated voltage(220V) and 10% voltage sag(198V). In case of fuel cut, it also showed stable shut-down characteristics. The test results are being used to develop a new safety evaluation for residential fuel cell system.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.305-306
• /
• 2003

In the case of the geosynthetics usage to soil structure, there are some damages by compaction. And these damages by the installation compaction result in the unexpected changes of short and long term properties of the structure. So in the case of index test, there are some problems to the exact evaluation on the installation damage. Therefore, to the more definite evaluation on the installation damage of geosynthetics, the real site installation damage test is encouraged. (omitted)