• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.96-101
• /
• 2015

In the previous study, we investigated the physical properties of new organic fillers made from major agricultural byproducts, including rice husks, peanut husks and garlic stems, and we estimated that rice husk was the best candidate for use as new organic fillers in paperboard. In this study, an organic filler prototype was produced with rice husk and the mill trials were carried out in a white liner chipboard (duplexboard) mill. The rice husk organic filler was added to the middle ply of SC $350g/m^2$ to determine the optimal conditions for the manufacture of rice husk organic fillers. The mill trials were performed three times and the bulk improvement and drying energy reduction were measured to identify the functionality of the rice husk organic filler compared to that of the commercial wood powder. In the first mill trial, the test failed because the surface roughness of the duplexboard had deteriorated after the rice husk organic filler was added to the OCC stock. As all of the particles remaining on the 60 mesh sieves were removed and the particle size was decreased by increasing the length of the grinding process, the surface roughness of the duplexboard did not be deteriorated in the second mill trial. However, the bulk improvement and drying energy reduction were not observed. In the final mill trial, as the particle size of the rice husk organic filler was controlled by increasing the portion of particles passing through the 60 mesh sieves and remaining 100 mesh sieves, higher bulk improvement and drying energy reduction were acquired compared to the commercial wood powder.

• The Journal of the Korean dental association
• /
• v.50 no.4
• /
• pp.203-210
• /
• 2012

Objective: The aim of this study was to investigate the incidence of the C-shaped canal of permanent mandibular second molar (PMSM) in Korean sub-population using Cone-Beam CT (CBCT) data and analyze the types of C-shaped canal. Materials & Methods: The protocol for this study was approved by the Institutional Review Board at the Pusan National University Hospital (E-2011039). Among the CBCT images taken of patients who visited the St. Bennedict Dental Hospital (Busan, Korea) from May 2008 to April 2011 for implant surgery and surgical removal of impacted teeth, high-quality CBCTs from 705 patients (361 male and 342 female) were screened and 607 PMSMs of 383 patients were evaluated retrospectively. All PMSMs were anatomically analyzed in detail by using image viewer software (EasyDent; Vatech). PMSMs were evaluated in the axial plane to investigate the shape of root and canals. The C-shaped canals were classified into five types. The total incidence, gender ratio, bilateral and unilateral appearance. and the correlation between right-side and left-side occurrences of C-shaped PMSMs were computed and compared statistically using the chi-square test. Results: Among the 607 PMSMs of 383 CBCTs of 187 females and 196 males, 198 PMSMs(32.6%) had C-shaped root and 158 PMSMs(26.0%) had C-shaped canals. The shape of C-shaped root canals at the furcalion level did not have significant change at the level of mid root (P<0.0001). Female had more prevalence of C-shaped root canals than male (P<0.0001). The prevalence of bilateral occurrence of C-shaped root canals was higher than unilateral occurrence. Conclusions: The occurrence of C-shaped PMSMs among a Korean population was 32.6% and was higher than other countries and ethnicities. Understanding the prevalence of PMSMs with a C-shaped root and/or canal in a Korean population may be useful for successful endodontic treatments.

• Analytical Science and Technology
• /
• v.33 no.3
• /
• pp.115-124
• /
• 2020

Marker pens belong to school things that are controlled by the regulation system called safety confirmation under special act on the safety of products for children with the formaldehyde criteria of 20 mg/kg. With nine marker pens available commercially, formaldehyde in marker pen ink was analyzed by present test standard where marking on a fabric swatch with a pen and extracting the swatch in water and derivatization with Nash reagent followed by UV/Vis spectrophotometeric measurement (Nash-UV/Vis method), giving not detected results or a false positive result in case of a colored water extract. However, the contents of formaldehyde in ink of nine marker pens were determinded to range between 3.2 ~ 93.2 mg/kg with three results above the safety criteria of 20 mg/kg by HPLC/DAD measurements on DNPH derivatives of formaldehyde (DNPH-HPLC/DAD method) in ink dissolved directly in water using an ultrasonic bath. Therefore, the DNPH-HPLC/DAD method with the extraction of ultrasonic dissolving ink in water is proposed as a proper method for analyzing formaldehyde in ink. The proposed method has advantages of lower detection limit and accuracy with colored extracts as well as a simple and fast extraction. The accuracy and precision of this method was estimated to be 90.1 ~ 105.4 % and 0.6 ~ 3.3 %, respectively by spiking tests in the ranges of 20 mg/kg and 40 mg/kg using matrixes such as highlighter pen ink, board marker ink, chalk marker pen ink and painter marker ink.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.315-321
• /
• 2015

ATMS calculates section travel time using two-way communication system called DSRC(Dedicated Short Range Communications) which collects data of RSE (Road Side Equipment) and Hi-pass OBU (On-board Unit). Travel time estimation in urban area involves uncertainty due to the interrupted flow. This study not only analyzed real-time data but also considered pattern data. Baek-Je-Ro street in Jeon-Ju city was selected as a test site. Existing algorithm was utilized for data filtering and pattern data building. Analysis results repoted that travel time estimation with 20% of real-time data and 80% of pattern data mixture gave minimum average difference of 37.5 seconds compare to the real travel time at the 5% significant level. Results of this study recommend usage of intermixture between real time data and pattern data to minimize error for travel time estimation in urban area.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.74-82
• /
• 2007

The M-Method that measures the speed of actuator with counting the number of Reaction wheel Tacho Pulse has the many advantages such that a realization is simple and measuring time is uniform, but it also has the disadvantage that measuring speed becomes worse as the wheel speed goes lower. On the contrary, the T-Method that measures the time duration between the pulses is more accurate at lower-speed and its time delay is smaller than M-Method, but its realization is more difficult than M-Method because measuring time is varying with wheel speed variation. Thought M/T Method mixing M-Method with T-Method is widely used in order to measure the speed in the motor industrial area, one of two methods has been used in the spacecraft design area. Therefore, we try to apply both methods together to measuring the speed of Reaction Wheel, the core actuator for low earth orbit satellite. This paper provides the Reaction Wheel simulation board located in the Spacecraft Dynamic Simulator, ground support test set.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.6
• /
• pp.1465-1475
• /
• 2016

In order to secure safe meals, the hazards of microorganisms associated with food poisoning accident should be monitored and controlled in real situations. It is necessary to determined the correlation between existing common bacteria number (aerobic plate count; APC) and RLU (relative light unit) in cookware. In this paper, we investigate the correlation between ATP (RUL) and APC (CFU) by using three types of transform (inverse, square root, log transforms) of raw data in two steps. Among these transforms, the log transform at the first step has been found to be optimal for the data of cutting board, knife, soup bowl (stainless), and tray (carbon). The square root-inverse and the square root-square root transform at the second step have been shown to be optimal respectively for the cup and for the soup bowl (carbon) data.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.205-218
• /
• 2009

The purpose of this study was to analyze what effects the service quality of the food and beverage section have on its organization value in the value-oriented hotel business, how the organization value influence work performance, and what causal relationships exist among variable factors such as service quality, organization value, and work performance for helping get the hotel business more profitable through guiding service improvements. For conducting the study, full-time staff working at the restaurants of premium hotels in Seoul participated in the test as samples from January 10th to January 22nd, 2009. The statistical data analyses were completed using the SPSS 12.0 program, and frequency analyses, reliability analysis, factor analysis, multiple regression analysis were conducted. The main results of this study were as follows. First, service quality of the food and beverage section in the hotel business caused positive effects on organization values. Second, it was found that the organization value and service quality also positively influenced work performance. Third, among service quality, organization value, and work performance, service quality had a direct effect on business performance, and organization value played an indirect role to cause effects on work performance through service quality. Accordingly, all of the workers engaging in the hotel business, including board of directors, ordinary managers and staff working at the food and beverage section, are highly required to recognize how keenly important service quality is for the hotel business.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.5
• /
• pp.29-46
• /
• 2006

Purpose: Since 1994, Asian Health Services, the Korean American Community Advisory Board, and the Center for Family and Community Health (University of California at Berkeley) have conducted periodic, population-based surveys on Korean American community health in Alameda County, California. The present study examines changes in health care access and utilization between 1994 and 2002 among Korean American adults in Alameda County, California. Method: We reanalyzed data from the 1994 and 2002 Korean Health Surveys. The primary variables of interest, health care access and utilization, were operationalized in terms of health insurance coverage, routine check-ups, a usual source of health care and reported barriers to health care. The frequency distribution of each indicator was calculated and its standard error was estimated using SUDAAN. The differences between 1994 and 2002 were examined with chi-square test. Results: Compared to 1994, Korean Americans in Alameda County were more likely to have health insurance coverage in 2002 (74.0% vs. 82.7%). Korean Americans in Alameda County were more likely to have received a recent (prior two years) routine health checkup in 2002 (50.4% vs. 57.2%). Health checkups increased over time for males, for adults with more than 12 years of education, and for employed adults. Also, compared to 1994, employed adults were more likely to have a usual source of health care in 2002 (66.5% vs. 78.4%). In both 1994 and 2002, high cost (58.0% vs. 47.8%) was the most commonly cited barrier to health care, and the next most frequently cited barriers were language (29.2% vs. 27.7%) and no time (29.2% vs. 30.3%). Conclusion: To improve health care utilization and health conditions, it is important to investigate factors related to health care and to monitor changing trends. Ongoing surveillance of health-related factors can contribute to the development of health education programs to reduce morbidity and mortality due to chronic disease, and thereby lead to improvements in health status among Korean Americans.

• Economic and Environmental Geology
• /
• v.37 no.4
• /
• pp.401-411
• /
• 2004

The Earth's total magnetic field was calculated from on board TAM(Three-Axis Magnetometer) observations of KOMPSAT-1 satellite between June 19th and 21st, 2000. The TAM's telemetry data were transformed from ECI(Earth-Centered Inertial Frame) to ECEF(Earth-Centered Earth-Fixed Frame) and then to spherical coordination. Self-induced field from the satellite bus were removed by the symmetric nature of the magnetic field. The 2-D wavenumber correlation filtering and quadrant-swapping method were applied to eliminate the dynamic components and track-line noise. To test the validity of the TAM's geomagnetic field, ${\phi}$rsted satellite's magnetic model and IGRF2000 model were used for statistical comparison. The correlation coefficients between KOMPSAT-1/${\phi}$rsted and KOMPSAT-1/IGRF2000 models are 0.97 and 0.96, respectively. The global spherical harmonic coeffi-cient was then calculated from the KOMPSAT-1 data degree and order of up to 19 and compared with those from IGRF2000, $\phi$rsted, and CHAMP models. The KOMPSAT-1 model was found to be stable to degree & order of up to 5 and it can give new information for the low frequency components of the global geomagtic field.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.7-16
• /
• 2005

Rejected Takeoff Accidents are not common. but if occurred, it leads to big disaster From the year of 1959, when Jet Transport service opened, to the year of 2000, Rejected Takeoff accidents/incidents occurred total of 94 cases. All cases led to overrun, and major cause is to initiate stopping maneuvers over $V_1$, takeoff decision speed, according to National Transport Safety Board of America. Similar results are represented in Aviation Safety Reporting System of National Aeronautics and Space Administration. So I believe that it is worth studying if Airplane Flight Manual, which is the reference Performance criteria, is appropriate to operations of line pilots. The definition of $V_1$ has been revised a couple of times and Rejected Takeoff Certification Standards for Transport Airplanes was changed in 1998. It shows that up to now there are some portions unreasonable. This study focused on gathering the pilot's tendency for current Rejected Takeoff Procedures of K airlines and analyze the factors they concern. I chose B777 airplane and actually measured the recognition and reaction time of the rejected takeoff transitions through Simulators. And compared the results with the data of flight test and Airplane Flight Manual.