• Title/Summary/Keyword: Test 1.1 & 2.1

Search Result 37,586, Processing Time 0.084 seconds

Tribological Performance of A1203/Ni0r Coating

  • Chae, Young-Hun;Kim, Seock-Sam
    • Journal of Mechanical Science and Technology
    • /
    • v.16 no.7
    • /
    • pp.911-918
    • /
    • 2002
  • The tribological performance of A1$_2$O$_3$/NiCr coating deposited on steel (SH45C) was investigated under lubrication. The parameters of sliding wear consist of normal load and coating thickness. Test result showed that there was no evidence of an improved bonding strength in the coating. However, the wear resistance of the A1$_2$O$_3$/NiCr coaling was significantly greater than that of the Al$_2$O$_3$ coating. It was eviclent that the residual stress for the A1$_2$O$_3$coating was higher than that of the A1$_2$O$_3$/NiCr coating from the Scratch test failure of coating. The bond coating played an important role in decreasing the residual stress. Also, it was found that the residual stress had d notable influence on the wear mechanism.

Genetical and Biochemical Studies on White Egg Strains of Silkworm, Bombyx mori (누에 백란 계통의 유전적 특성구명을 위한 유전.생화적 연구)

  • 이은정;임봉학
    • Journal of Sericultural and Entomological Science
    • /
    • v.39 no.2
    • /
    • pp.134-139
    • /
    • 1997
  • To elucidate genetical and biochemical characters of the white egg strains preserved in National Sericultural and Entomology Research Institute(NSERI), RDA of Korea, the genetic segregation ratios in egg colours were investigated by crossing test, and egg pigment precursors were also analyzed by paper chromatography and UV-spectrophotometer scanning. The result obtained by crossing test between the white egg strains and normal one illustrated that the most of white egg strains showed typical segregation ratio of white egg-2(w-2), while maternal inheritance which can be seen in white egg-1(w-1) was not found in any white egg strains. Paper chromatographic analysis showed that egg extracts of all the white egg strains contained 3OH-kynurenine, while kynurenine which is known to existed in white egg-1(w-1) could not be detected at all. From the results of these experiments, it was found that all the white egg strains preserved in NSERI were classified as the white egg-2(w-2) strain.

  • PDF

Testing for Failure Rate Ordering between Survival Distributions

  • Park, Chul-Gyu
    • Journal of the Korean Statistical Society
    • /
    • v.23 no.2
    • /
    • pp.349-365
    • /
    • 1994
  • We develop in this paper the likelihood ratio test (LRT) for testing $H_1 : F_1 \preceq F_2$ against $H_2 - H_1$ where $H_2$ imposes no restriction on $F_1$ and $F_2$ and '$\preceq$' means failure rate ordering. Both one and two-sample problems will be considered. In the one-sample case, one of the two distributions is known, while we assume in the other case both are unknown. We derive the asymptotic null distribution of the LRT statistic which will be of chi-bar-square type. The main issue here is to determine the least favorable distribution which is stochastically largest within the class of null distributions.

  • PDF

Strength Properties of $Al_2O_3$ Ceramics with Textile Machinery (섬유기기용 $Al_2O_3$계 세라믹스의 강도 특성)

  • An, B.G.;Ahn, S.H.;Park, I.D.;Nam, K.W.
    • Journal of Power System Engineering
    • /
    • v.8 no.4
    • /
    • pp.44-48
    • /
    • 2004
  • For many years researchers have been attempting to establish the relations among the preparation history, structure and properties of ceramics. In this study, the strength property of $Al_2O_3$ ceramics with components and giudes of the textile machinery was investigated. The optimized conditions of ressureless sintering were investigated in order to obtain the maximum strength of $Al_2O_3$ ceramics for using at the textile machinery. As the sintering conditions, $1,400{\sim}1,700^{\circ}C$ of temperatures and $30{\sim}150$ minutes of times were applied. Three-point bending test was conducted on the sintered materials to obtain the strength property. From test results, the optimum sintering temperature has $1,600^{\circ}C$. And the optimum sintering time in $1,600^{\circ}C$ has about 100 minutes.

  • PDF

The relation between phonetic differences of Korean learners' production of English vowels, pronunciation intelligibility and speaking proficiency test scores (한국인 학습자 영어 모음 발화의 음성학적 차이와 발음 이해도, 말하기 점수와의 관계)

  • Kim, Ji-Eun
    • Phonetics and Speech Sciences
    • /
    • v.9 no.2
    • /
    • pp.1-7
    • /
    • 2017
  • The purpose of this study is to investigate the relations between phonetic differences among Korean learners' production of English front vowels, pronunciation intelligibility and speaking proficiency test score. To do so, thirty Korean university students were asked (1) to read English text book paragraphs and (2) describe a picture. Two English native raters and one Korean rater evaluated Korean subjects' English pronunciation intelligibility and speaking. In addition, subjects' English vowel productions were acoustically analyzed(F0, F1, F2, vowel duration, intensity). The results of the study show that the vowel quality and pitch of the unstressed vowels and lax vowel are related to the pronunciation intelligibility. In addition, the scores of pronunciation intelligibility and speaking are highly related.

Volume Resistivity Properties due to the Curing Condition of Silicone Gel for Semiconductor (반도체용 실리콘 젤의 경화조건에 따른 체적고유저항 특성)

  • 조경순
    • Journal of the Korea Computer Industry Society
    • /
    • v.3 no.12
    • /
    • pp.1747-1758
    • /
    • 2002
  • In order to study the electrical properties of silicone gel due to the curing condition, AC breakdown test is researched. For experiment, we have made up several samples cured during each 30[Min], 1[H], 2[H] at 100[$^{\circ}C$], 125[$^{\circ}C$], 150[$^{\circ}C$], 160[$^{\circ}C$], 170[$^{\circ}C$], 180[$^{\circ}C$]. The equipment for this test can measure the dipole output voltage to 50[kV], with increasing rate of about 3[kV] per second. A material of electrode using to the breakdown test is a copper(purity : 99%), the gap between electrodes is to 1[mm]~3[mm], and it thickness is 0.2[mm]. As a result of the experiment, the electrical properties of specimen cured at 170[$^{\circ}C$] for 2[H] is superior.

  • PDF

Prevalence of Heartworm disease in Dogs of Daejeon Area (대전지역 사육견의 심장사상충 감염실태 조사)

  • 장승익;송운재;하숙희;이상준;정년기;문병천
    • Korean Journal of Veterinary Service
    • /
    • v.27 no.2
    • /
    • pp.133-137
    • /
    • 2004
  • This study was attempted to survey on the prevalence of canine heartworm(Dirofilaria immitis) infections among 206 dogs (male 92, female 114) in Daejeon area from March to December 2003. Blood samples taken from dogs were examined for the presence of D immitis microfilaria by the modified Knott's test and an antigen test( $AGEN^{TM}$ canine heartworm). The result obtained from this experiment were summarized as follows; 1. Eighteen(8.7%) of the 206 examined dogs were microfilaria positive, while twenty five dogs(12.1%) were antigen test positive. 2. The infection rates of heartworm in dogs at the age of <2, 2∼4 and $\geq$5 were 3.8%, 18% and 25%, respectively. 3. The infection rates of heartworm in dogs by housing of indoor and outdoor were 3.3% and 36.4%, respectively. 4. The regional infection rates were Dong-gu(13/29, 44.8%), Seo-gu(7/92, 7.6%), Yuseong-gu(2/33, 6.1%), Jung-gu(1/17, 5.9%) and Daedeok-gu(2/35, 5.7%). 5. The seasonal infection rates were summer(June∼August, 16.7%), autumn (September∼October, 14%), spring(March∼May, 9.4%) and winter(November∼December. 7.7%).7.7%).

Relationship Between Postpartum Depression and Body Image in Postpartum Women (분만 여성의 산후 우울과 신체상의 관계)

  • Kim, Boon-Han;Jeon, Hye-Won;Jung, Yun
    • Journal of Korean Academy of Nursing
    • /
    • v.32 no.6
    • /
    • pp.906-916
    • /
    • 2002
  • The purpose of this study was to identify the change and difference and relationship of postpartum depression and physical image. Method: The subjects consisted of 86 postpartum women at one general hospital in Seoul. The data was collected from September to November 2001. The instrument used for this study were SRD (Self-Rating Depression Scale) and Norris' Body Image Scale to evaluate depression and body image. The collected data was analyzed with frequency, mean, t-test, paired t-test, ANOVA and Pearson's correlation coefficient. Result: The result of this study were as follows: 1. The mean score of D2 was significantly higher than D1(p=.003). There was no difference significantly B1 and B2(p=310). 2. There was significant correlation between the two, D1-D2(r=.381, p<.01), B1-B2(r=.364, p<.01), D1-B1(r=.579, p<.01), D2-B2(r= .567, p<.01). (*D1: depression of postpartum 1-3days, D2: depression of postpartum 6-8weeks, B1: body image of postpartum 1-3days, B2: body image of postpartum 6-8weeks) Conclusion: There was very high postpartum depression in postpartum women, but body image was positive. Also, there was correlated to postpartum depression and body image. Thus it is necessary to implement nursing intervention focused on to decrease the postpartum depression and to enhance the body image of the postpartum women.

A Test Result on the Positional Accuracy of Kompsat-3A Beta Test Images

  • Oh, Jae Hong;Seo, Doo Chun;Lee, Chang No
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.34 no.2
    • /
    • pp.133-142
    • /
    • 2016
  • KOMPSAT-3A (KOrea Multi-Purpose SATellite-3A) was launched in March 25 2015 with specification of 0.5 meters resolution panchromatic and four 2.2 meters resolution multi spectral sensors in 12km swath width at nadir. To better understand KOMPSAT-3A positional accuracy, this paper reports a test result on the accuracy of recently released KOMPSAT-3A beta test images. A number of ground points were acquired from 1:1,000 digital topographic maps over the target area for the accuracy validation. First, the original RPCs (Rational Polynomial Coefficients) were validated without any GCPs (Ground Control Points). Then we continued the test by modeling the errors in the image space using shift-only, shift and drift, and the affine model. Ground restitution accuracy was also analyzed even though the across track image pairs do not have optimal convergence angle. The experimental results showed that the shift and drift-based RPCs correction was optimal showing comparable accuracy of less than 1.5 pixels with less GCPs compared to the affine model.

Comparison of Electrochemical Corrosion Properties of Permanent Mold Casting GZ21 Alloy and AZ91 Alloy (금형 주조한 GZ21 합금과 AZ91 합금의 부식특성 비교)

  • Kim, Dae Han;Kim, Byeong Ho;Park, Kyung Chul;Chang, In Ki
    • Journal of Korea Foundry Society
    • /
    • v.36 no.2
    • /
    • pp.60-66
    • /
    • 2016
  • In this study, comparison of corrosion properties of the Mg-1.5Ge-1Zn (GZ21) alloy and Mg-9Al-1Zn (AZ91) alloy were investigated. The studied alloys were fabricated by permanent mold casting method. And the potentiodynamic test, hydrogen evolution test, immersion test and A.C Impedance test were carried out in a 3.5% NaCl solution with pH7.2 at room temperature to measure the corrosion properties. The microstructure of GZ21 alloy was composed of ${\alpha}-Mg$ and $Mg_2Ge$ phases and AZ91 alloy was composed of ${\alpha}-Mg$ and $Mg_{17}Al_{12}$ phases. From the test results, the corrosion property was improved by adding Ge. It seemed that the corrosion mechanism was changed from galvanic corrosion (AZ91) to filiform corrosion (GZ21).