• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.89-97
• /
• 2004

Many strains of Staphylococcus aureus were isolated from pus samples from primary, secondary, and tertiary medical institutions and were subjected to an antibiotic sensitivity test. Ciprofloxacin, clindamycin, erythromycin, gentamicin, oxacillin penicillin, tetracycline, trimethoprim/sulfamethoxazole, vancomycin and teicoplanin were used for the antibiotic sensitivity test. The strains showed hightest resistance to penicillin(91%), but all of strains tested were susceptible to vancomycin and teicoplanin. The isolated multi-drug(penicillin-tetracycline-ciprofloxacin-clindamycin-erythromycin- oxacillin-gentamicin) resistant S. aureus were analyzed genotypically using an AP-PCR(Arbitrarily Primed polymerase chain reaction) with an arbitrary 3 primers. Based on the result for genotype analysis, the genotypes identified by S1 primer did not coincide with those of S2 or E2 primers. Genotypes identified by S2 primer did not coincide with those of S1 or E2 primers. Also genotypes identified by the E2 primer did not coincide with those of S1 or S2 primers. Therefore, an analysis of AP-PCR test with multiple primers will provide more sensitive identification. A strain from a secondary medical institution and a strain from a tertiary medical institution which showed the same genotype for S1, S2, and E2 primers are required for further epidemiological study.

• Korean Journal of Pharmacognosy
• /
• v.46 no.3
• /
• pp.229-233
• /
• 2015

The anti-nociceptive effect of an ethanol extract and its various solvent fractions from Curcuma longa Linne ethanol extract was studied using the writhing test in mice. Different fractions by various solvent extraction from Curcuma longa Linne ethanol extract were administered orally 1 hr or time-course (0.5, 1, 2 and 5 hr) before intraperitoneal injection of acetic acid. After treatment with 30% ethanol extract and n-butanol fraction, CB-1, at a dose of 250 mg/kg, the significant writhing responses were 87.5 ± 13.4 (inhibition rate 31%, p<0.01) and 75.1 ± 11.1 (inhibition rate 41%, p<0.01) lower than the control group. At the dose of CB-1 50 mg/kg and 250 mg/kg, CB-1 showed a similar activity comparing to diclofenac of 10 mg/kg. A time-course experiment was performed, which involved oral administration of CB-1 (250 mg/kg) at 0, 0.5, 1, 2, and 5 hr before acetic acid intraperitoneal injection. The most effective time of CB-1 was 30 min before treatment and persisting until 2 hr. This study showed that Curcuma longa Linne has anti-nociceptive properties comparable with those of diclofenac, which suggests promise for the treatment of intractable visceral pain in humans. Major components of the active fraction are identified as curcumin, cyclocurcumin and demethoxycurcumin.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.2
• /
• pp.99-114
• /
• 2020

The characteristics of the Brazilian tensile strengths(σ_t) parallel to the rock cleavages in Jurassic granite from Geochang were analysed. The evaluation for the six directions of rock cleavages was performed using the parameter values on microcrack length and the above strength. The strength values of the five test specimens belonging to each direction were classified into five groups. The strength values of these five groups increase in order of group A < B < C < D < E. The close dependence between the above microcrack and strength was derived. The analysis results of this study are summarized as follows. First, the chart showing the variation and characteristics of strength among the three rock cleavages were made. In the above chart, the strength values of six directions belonging to each group were arranged in order of rift(R1 and R2), grain(G1 and G2) and hardway(H1 and H2). The strength distribution lines of the five groups concentrate in the direction of R1. And the widths among the above five lines indicating strength difference(Δσ_t) are the most narrowest in R1 direction. From the related chart, the variation characteristics among the two directions forming each rock cleavage were derived. G2(2)-test specimen shows higher value and lower value of the difference in strength compared to the case of G1(1)-test specimen. These kinds of phenomena are the same as the case between the test specimen H2(2) and H1(1). The strength characteristics of the above test specimens (2) suggest lower microcrack density value and higher degree of uniformity in the distribution of microcracks arrayed parallel to the loading direction compared to those of test specimens (1). The six strength values belonging to each group were arranged in increasing order in the above chart. The strength values of the test specimens belonging to both group D and E appear in order of R1 < R2 < G1 < H1 < G2 < H2. Therefore, the strength values of group D and E can be indicator values for evaluating the six directions of rock cleavages. Second, the correlation chart between slope angle(θ) and strength difference(Δσ_t) were made. The values of the above two parameters were obtained from the five strength distribution lines connecting between the two directions. From the chart related to rift plane(G1-H1, R'), grain plane(R1-H2, G') and hardway plane(R2-G2, H'), the slope values of linear functions increase in order of R'(0.391) < G'(0.470) < H'(0.485). Among three planes, the charts related to hardway plane show the highest distribution density among the five groups. From the related chart for rift(R1-R2, R), grain(G1-G2, G) and hardway(H1-H2, H), the slope values of linear functions increase in order of rift(0.407) < hardway(0.453) < grain(0.460). Among three rock cleavages, the charts related to rift show the highest frequency of groups belonging to the lower region. Taken together, the width of distribution of the slope angle among the three planes and three rock cleavages increase in order of H' < G < R' < R < G' < H. Third, the correlation analysis among the parameters related to microcrack length and the tensile strengths was performed. These parameters may include frequency(N), total length(Lt), mean length(Lm), median length(Lmed) and density(ρ). The correlation charts among individual parameters on the above microcrack(X) and corresponding five levels of tensile strengths for the five groups(Y) were made. From the five kinds of correlation charts, the values of correlation coefficients(R²) increase along with the five levels of strengths. The mean values of the five correlation coefficients from each chart increase in order of 0.22(N) < 0.34(Lt) < 0.38(ρ) < 0.57(Lmed) < 0.58(Lm). Fourth, the correlation chart among the corresponding maximum strength for group E(X) and the above five parameters(Y) were made. From the related chart, the values of correlation coefficient increase in order of 0.61(N) < 0.81(Lt) < 0.87(ρ) < 0.93(Lm) < 0.96(Lmed). The two parameters that have the highest correlations are median length with maximum strength. Through the above correlation analysis between microcrack and strength, the credibility for the results from this study can be enhanced.

• The Journal of the Korean dental association
• /
• v.15 no.2
• /
• pp.145-151
• /
• 1977

The author performed Snyder test, estimation of salivary flow rate, salivary viscosity test, salivary buffering capacity test, M-R test, oral hygiene ability test, estimation of oral glucose clearance time and plaque reformation test in the 107 male Koreans aged form the age of 20 to 29, in order to detect and control the active cariogenic factors contributing to caries development on the individual basis. Thereafter, the data from 8 kinds of caries activity test were analysed and evaluated. The obtained results were as follows: 1. Snyder test was positive in 86.0% of total tested persons, and among those showing positive Snyder test reaction, slight caries activity was appeared in 39.1%, moderate caries activity in 23.9%, and marked caries activity in 37.0%. 2. Salivary flow rate was under the average flow amount in 53.3%. 3. Salivary buffering capacity was low in 22.4%. 5. Buffering capacity of dental plaque was high in 12.5%. 6. Oral hygiene ability was insufficient in all persons tested. 7. Oral glucose clearance time was long in 42.1%. 8. Plaque reformation rate was high in 8.4% of the 107 persons tested.

• Journal of The Korean Association of Information Education
• /
• v.24 no.4
• /
• pp.301-311
• /
• 2020

A model of cooperative learning, Pair Programming was applied to regular class for middle school students. Algorithm and programming skill were taught through the pair programming for two week and the achievement was analyzed based on 4Cs(Critical thinking, Communication, Collaboration, Creativity) proposed by the NEA(National Education Association). The control group was statistically significant on Critical Thinking between pre-test and post-test1, while the experimental group was statistically significant on all measurements of 4Cs. Between pre-test and post-test2, the control group showed overall little difference in range of 0.2 points on the 4Cs average scores. while the experimental group was statistically significant on all measurements of 4Cs. Between post-test1 and post-test2, there was no significant difference on 4Cs average scores in both groups. The experimental group showed higher score results on all 4Cs than the control group. This study verifies that the benefits of Pair Programming on 4Cs.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.72-80
• /
• 2005

A recycled aggregate contains impurities that affect negative effects on physical properties of concrete. Therefore, a test method for examining impurities content in recycled aggregate is necessary before use of recycled aggregate. In this study, the test method by visual examination for separating impurities in recycled fine and coarse aggregates was developed. The results of the test are as follow: 1. The current KS F 2576 was necessary for comprehensive revision including types of tested recycled aggregate, definition of terminology, quantity of sample, and test method. 2. Visual examination is appropriate for larger than impurity panicle size of 1.2mm, and the larger panicle size the shorter time was required. 3. For the impurity content test by visual examination, the easiness and accuracy of the test can be obtained from the condition of sample weight of 30 grams with particle size of 2.5mm to 5mm for recycled fine aggregate and the condition of sample weight of 1 kilogram with panicle size of larger than 5mm for recycled coarse aggregate.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.2
• /
• pp.61-72
• /
• 2008

Objectives : The aim of this study was to evaluate effects of herbal medicine and other associated factors for abnormal liver function tests(especially total bilirubin, AST, ALT, and ${\gamma}$GT) levels in outpatients at an oriental medical clinic. Methods : A cross-sectional study based on clinical records was conducted on 504 patients at one Oriental medical clinic in Seoul, Korea. They were tested a liver function tests for screening and 497 patients ranging from the age of 4 to 74 were chosen for the study. Patients with basal liver disease or DM were excluded during the screening process. Patients were classified into case(abnormal) and control(normal) groups by normal liver function test references. Results and Conclusions : In this study, Significant correlations for abnormal total bilirubin levels was age, for abnormal AST was gender, for abnormal ALT were gender, smoking, marriage status, and job, for abnormal ${\gamma}$GT were age, gender, obesity, alcohol, smoking, marriage status, and job using the Chi-square test(p<0.05). There was no significant correlations for abnormal LFTs by using herbal medication history, and intake duration. After controlling other covariates, logistic regression analysis showed that the significant associated factors for abnormal total bilirubin levels were age(odds ratio[OR]=0.87, 95% confidence intervals [CI]=0.87-0.99). For abnormal AST levels was obesity(OR=2.45, CI=1.2-4.9), for abnormal ALT levels were age(OR=1.01, CI=0.99-1.03), male gender(OR=3.31, CI=1.62-6.76), and obesity(OR=3.71 CI=2.28-6.08). For abnormal ${\gamma}$GT levels were male gender(OR=4.83 CI=1.34-17.43), obesity(OR=3.29, CI=1.74-6.22), alcohol (OR=2.51, CI=1.19-5.28), and smoking(OR=2.29, CI=1.16-4.50). Herbal medication history was not as a risk factor for all abnormal liver function tests. Therefore, people who are male, obese, alcohol drinker and smoker will have higher liver function test levels. But intake of herbal medication or the duration of intake may not be the risk factor for abnormal liver function test results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.160-166
• /
• 2013

Purpose: The purpose of this study was to compare the fracture strength of traditional metal-ceramic crowns and full zirconia crowns according to the occlusal thickness. Materials and methods: A mandibular first molar resin tooth was prepared with 1.5 mm occlusal reduction, 1.0 mm rounded shoulder margin and $6^{\circ}$ taperness in the axial wall. Duplicating the resin tooth, 64 metal dies were fabricated. 48 full zirconia crowns were fabricated using Prettau zirconia blanks by ZIRKONZAHN CAD/CAM and classified into six groups according to the occlusal thickness (0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm). 16 metal-ceramic crowns were fabricated and classified into two groups according to the occlusal porcelain thickness (1.0 mm, 1.5 mm). All crowns were cemented on each metal die and mounted in a universal testing machine. The load was directed at the functional cusp of each specimen until catastrophic failure occurred. One-way ANOVA, Tukey multiple comparison test (${\alpha}=.05$) and t-test (${\alpha}=.05$) were used. Results: The results were as follows. 1. The test 1 group (646.48 N) showed the lowest fracture strength (P<.05), and the value of the test 2.3.4.5 groups (866.40 N, 978.82 N, 1196.82 N, 1222.41 N) increased as thickness increased, but no significant difference were found with the groups (P>.05). The value of test 6 group (1781.24 N) was significantly higher than those of the other groups (P<.05). 2. There were no significant differences of the fracture strength of metal ceramic crowns according to occlusal porcelain thickness 1.0 mm (2515.71 N) and 1.5 mm (3473.31 N) (P<.05). Conclusion: Full zirconia crown needs to be 1.0 mm or over in occlusal thickness for the posterior area to have higher fracture strength than maximum bite force.

• Communications for Statistical Applications and Methods
• /
• v.17 no.1
• /
• pp.79-88
• /
• 2010

Introductory statistic class proposes two tests for the equality of two population means according to the homogeneity of their variances. However, in practice, the variances are also unknown and practitioners often test their homogeneity before they do two sample t-test. This is also true in many popular statistical packages such as SAS and SPSS. In this paper, we study the type I error of this two stage procedure and propose a procedure to control it at a given significance level.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.2
• /
• pp.166-173
• /
• 2004

Objectives : Cervical cancer is the second most frequent cancer among women in Busan. The Pap smear test could have a significant effect on detecting cervical cancer, and enhancing their rate of use is an important strategy for reducing the incidence and mortality of cervical cancer. This study aimed to evaluate the factors associated with the past use of the Pap smear test in Korean women. Methods : A population-based survey was carried out in Busan between November 1999 and March 2000. 1,673 participants were randomly selected from 2,684 women in Busan, using a 2-stage cluster sampling method, and interviewed in their homes. Their socio-demographic characteristics, smoking, drinking, familial cancer history, Pap smear screening history, reproductive and menstrual factors, sexual habits and use of contraceptive methods data were collected by a trained interviewer using a questionnaire. The use of the screening test was defined by a self-report from the participants on how many times they had had a Pap smear test in their lifetime, and when they had received their latest examination. Results : Of the 1,673 respondents (62.3% response rate), 57.6% had had a Pap smear test during her life (mean number, 2.3). Among the health examination participants(1,064), 961(90.3%) reported having sexual experience and 70.9% of these had had a Pap smear test. In a multiple logistic regression analysis, statistically significant relationships were observed for age groups and the Pap smear test rate (odds ratio, OR for 35-44 years=2.45; OR for 45-54 years=3.41; OR for 55 years=2.60; reference, under 34 years). The married or cohabiting women were more likely to have used the Pap smear test than those separated or widowed (OR=1.73). Among the reproductive behavioral measures, the number of births (OR for 3 births=4.22; OR for 2 births=3.95; OR for 1 births=3.38; reference, 0 births) and husband's extra-marital affairs (OR=1.50) were associated with the rates of use of Pap smear tests. Conclusion : It appears that the most important contributing factors to cervical cancer screening were age, marital status and number of births. A positive association was also observed for the husband's extra-marital affairs. This study enabled us to systematically assess the relationship between Pap smear rates and risk factors for cervical cancer. It is hoped that this study will make a significant contribution to the accumulating scientific evidence on the identification of factors associated with cervical cancer screening in Korea.