• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.189-196
• /
• 2010

Domestic software test maturity level is the most Level 2 below based on TMMi. The first condition of enhancement of test maturity is that know exactly what the current maturity. There is no Level 1 definition in TMMi, but even the same level of maturity level of an organization, there are clear differences. In this study, grasp a maturity level of Level 1 organization, while less effort to improve in Level organization, the ways to achieve Level 2 is presented. Sub practices with dependencies in Level 2 is grouped with the corresponding process areas and define a Level 1 newly at 3 phases. If sub practices with dependencies are tied and improve a process, it will produce the effect which attains the practices all at once. Verify the adequacy of three phases, as a result, an organization clearly identify Test Maturity Level 1, we know that the organization can set specific improvement goals and direction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.135-143
• /
• 1999

This investigation evaluates effects of notch depth, fatigue precrack length and side groove in impact specimen for estimation of a valid K1d by instrumented Charpy impact test. Specimen material is 6005-T6. for notch depth 2.0mm and 2.5mm specimens or within about 2mm fatigue precrack length with notch depth 2.0mm and 2.5mm specimens or within about 2mm fatigue precrack length with notch depth 2.0mm , dynamic fracture toughness [$K_{1d,(1)}$] obtained by crack initiation load($P_m$) should be used. Dynamic fracture toughness of side grooved specimens are overestimated to that of standard impact specimen about 15 %-20%. It is confirmed that the formula of dynamic fracture toughness obtained by impact absorbed energy is inappropriate for ductile materials.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.295-305
• /
• 2005

To improve the aerodynamic effciency of TR-E2, a new configuration so called TR-E2Sl was introduced. TR-2251 is composed of different wing airfoil section and T-tail shape compared with TR-E2. Wind tunnel test for TR-EBS1 had been performed by changing the incidence angles of wing and deflection angles of control surfaces such as elevator and rudder. Also the on/off effect of ventral fin attached underneath of AFT fuselage was tested. Test result showed that variations of wing incidence angle did not cause any severe differences in aerodynamic characteristics. Longitudinal and directional characteristics of TR-E2S1 show stable for the pitch and yaw motions. However, the lateral stability of TR-E2S1 is not stable for a certain control surface deflection.

• Laser Solutions
• /
• v.2 no.1
• /
• pp.61-67
• /
• 1999

This study introduces the new concept in the evaluation criteria of the $CO_2$ laser Tailored Blank weldability, The materials used are 0.7mm, 1.5mm thick low carbon automotive galvanized steels. Welding tests were conducted for both similar thickness(0.7mm-0.7mm, 1.5mm-1.5mm) and dissimilar thickness(0.7mm-1.5mm) cases. The criteria developed for optimum welding conditions were based on relationship between results of die press forming test, weld transverse tensile test Erichsen test and weld penetration measurements. Application of the developed criteria(fracture ratio, strength ratio and D/To) in obtaining optimum welding condition revealed that a weld which satisfied any of the criteria did not fracture during actual die press test.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.7-13
• /
• 1975

In other to determine the optimum condition for the alkali digestibility test, the milling degree of samples,the concentrations of potassium hydroxide,the temperature and the length of time for soaking were discussed.The results obtained from these experiment are summarized as follows; 1.Over 90 minute-milled samples in a new test tube miller showes the stable alkali digestibility values. 2.The optimum conditions for the alkali digestibility test were shown as 1.8 percent for the simultaneous treatment of Indica and Japonica varieties,1.4 percent or below for only Japonica and/or soft group varieties,and 2.2 percent of KOH for only Indoca and/ot hard group varieties provided the temperature and soaking time were fixed at \;30^{\circ} and 18 hours respectively.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.51-56
• /
• 2015

This paper presents the procedure of drag prediction for EAV-1, based on a numerical analysis correlated to an in-flight test. EAV-1, developed by Korea Aerospace Research Institute, is a small-sized UAV to test a hydrogen-fuel cell power system. The long-endurance test flight of 4.5 hours provides numerous in-flight data. The thrust and drag of EAV-1 during the flight test are estimated based on the wind-tunnel test results for EAV-1's propeller performance. In addition, the CFD analysis using a commercial Navier-Stokes code is carried out for the full-scale EAV-1. The computational result suggests that the initial CFD analysis substantially under-predicts the in-flight drag in that the discrepancy is up to 27.6%. Therefore, additional investigation for more accurate drag prediction is performed; the effect of propeller slipstream is included in the CFD analysis through "fan disk" modelling. Also, the additional drag from airplane trim and load factor that actually exists during the flight test in a circular path is considered. These supplemental analyses for drag prediction turn out to be effective since the drag discrepancy reduces to 2.3%.

• Journal of the Korean Arthroscopy Society
• /
• v.17 no.1
• /
• pp.18-23
• /
• 2013

Purpose: The purpose of this study is to evaluate the usefulness of anatomical single bundle anterior cruciate ligament (ACL) reconstruction using outside-in technique by clinical outcome analysis. Materials and Methods: From July 2009 to July 2010, 41 cases of single bundle ACL reconstruction using outside-in technique which were followed minimum 1 year were enrolled. Clinical results were evaluated using International Knee Documentation Committee (IKDC) subjective knee evaluation score, Lysholm score, pivot shift test, one leg hop test, KT-1000 arthrometer test, Telos stress arthrometer test. Results: IKDC subjective knee score and Lysholm score were improved to $86.1{\pm}2.1$ and $91.2{\pm}3.8$ postoperatively (p<0.0001 and p<0.0001, respectively). KT-1000 arthrometer test and Telos stress arthrometer test also were improved to $2.2{\pm}0.9\;mm$ and $2.3{\pm}1.2\;mm$ (p<0.0001 and p<0.0001, respectively). Pivot shift test and one leg hop test revealed good results. Conclusion: Anatomical single bundle anterior cruciate ligament reconstruction using outside-in technique showed good clinical results, so it was considered available method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.187-192
• /
• 1995

Four types of experiments were performed to check the similitude of member behavior between prototype and 1/10 scale models:(1) Test of slender columns with P- effect, (2)Test of short columns with and without confinement steel, (3)Test of simple beams without stirrups, and (4)T-beam test. Based on the results of experiments, the conclusions were made as follows : (1) The P- effect of slender columns can be almost exactly represented by 1/10 acale model. (2)The effect of confinement on short columns by the hoop steel can also roughly simulated by 1/10 scale model. (3)The failure modes of simple beams models were the yielding of tension steel followed by large diagonal tension cracking+compressive concrete failure. (4)The behaviors of prototype and 1/10 scale model in T-beams appear very similar.

• Journal of dental hygiene science
• /
• v.10 no.1
• /
• pp.25-29
• /
• 2010

This study was to estimate the effect of herbal medicines on periodontal disease. To screen effective materials for periodontal disease, we performed a series of test for 15 herbal medicine extracts. MIC test for P. gingivalis, IL-$1{\alpha}$ inhibition test, MMP-1 inhibition test and SOD activation test were carried out for herbal medicine extracts, respectively. The results are as followings : 1) Eunhang, Youkdoogu, Daewhang, Hoobak, Goojulcho, Yongacho, Mokhyang, Sesin, Sancho and Hoehyang extracts were effective for reduce P. gingivalis, 2) Eunhang, Jacyak, Youkdoogu, Hagocho, Hoobak, Guaru and Sanyak extracts showed high IL-$1{\alpha}$ inhibition rates, 3) Eunhang and Youkdoogu extracts have effects on MMP-1 inhibition, 4) Eunhang, Sanyak and Youkdoogu extracts effectively activate SOD. Especially, Eunhang extract has high performance through all estimations and can effectively prevent and treat periodontal disease.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.27-30
• /
• 2001

Electromigration Phenomena in Al-1%Si thin film interconnections under DC and PDC conditions were investigated. Thin film interconnections with $SiO_2$ and PSG/$SiO_2$ dielectric passivation layer were formed by a standard photolithography process method and test line lengths were 100, 400, 800, 1200, and 1600 $\mu\textrm{m}$. The current density of $1.19\times10^7\textrm{A/cm}^2$ was stressed in Al-1%Si thin film interconnections under DC condition. The current density of $1.19\times10^7\textrm{A/cm}^2$ was also applied under PDC condition at the frequency of 1 Hz with the duty factor of 0.5. The electromigration resistance of PSG/SiO2 dielectric passivation test line was stronger than $SiO_2$ dielectric passivation test line. The lifetime under PDC was 2-4 times longer than DC condition. As the thin film interconnection line increased, the lifetime decreased and saturated over the critical length. Failure patterns by an electromigration were dominated by void-induced electrical open and hillock-induced electrical short.