• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.43-48
• /
• 1986

To improve the accuracy of the interpolation point of the digital terrain models, this paper compared the methods of terrain data acquisition and the equations of the curved surface

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2012

Due to the increasing demand to utilize water fronts and water resource effectively, a multi-dimensional model that provides detailed hydraulic characteristics is required in order to improve the decision making process. An EFDC model is a kind of multi-dimension model, and it requires detailed 3D (3-dimensional) terrain in order to simulate the hydraulic characteristics of stream flow. In the case of 3D terrain creation, especially river reaches, measurement resolution and spatial interpolation methods affect the detailed 3D topography which uses input data for EFDC simulation. Such results make hydraulic characteristics to be varied. This study aims to examine EFDC simulation results depending on the 3D topographies derived by separate measurement resolution and spatial interpolation methods. The study area is at the confluence of the Nakdong and Kuemho Rivers and the event rain implemented was Typhoon Ewiniar in 2006. As a result, in the case of the area-elevation curve, the difference by means of the interpolation methods was significant when applying the same measurement resolution, except at 160m resolution. Furthermore, when the measurement resolution was 80m or above, the difference in a cross-section was occurred. Meanwhile, the water level changes between interpolation methods were insignificant by the measurement resolution except when the Kriging method was used for the 160m measurement data. Velocity changes emerged according to the interpolation methods when measurement resolution was 80m or above and the Kriging method resulted in a velocity that had a considerable gap in relation to the results from other methods at a measurement resolution of 160m.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.968-970
• /
• 1995

The Information Diffusion Neural Networks is proposed to regenerate the 3-dimensional terrain elevation data from contour lines. Contours in paper map are an expression of terrain elevation in highly compressed form. A real time regeneration of terrain data for each grid points from the the contour information is required for various applications. In the proposed neural networks, the elevation information on contours is diffused to neighbor units through updating its output toward that of neighbor units. An interpolation of terrain information is achieved from such computation mechanithm. Terrain data regeneration simulation has been done with sampled terrain data on contour lines.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.341-345
• /
• 2010

It is known that the accuracy of DEM is related with terrain morphology, sampling density, and interpolation method. However, the theoretical reasons for these correlations have rarely been accounted for so far. This study aimed to verify a theoretical basis that DEM accuracy can be assessed based on approximation theory when we generate a DEM using lots of precise and accurate source data such as digital maps and LIDAR data.

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.323-329
• /
• 2014

Since the terrain of Korea is complex, micro- as well as meso-climate variability is extreme by locations in Korea. In particular, air temperature of agricultural fields is influenced by topographic features of the surroundings making accurate interpolation of regional meteorological data from point-measured data. This study was carried out to compare spatial interpolation methods to estimate air temperature in agricultural fields surrounded by rugged terrains in South Korea. Four spatial interpolation methods including Inverse Distance Weighting (IDW), Spline, Ordinary Kriging (with the temperature lapse rate) and Cokriging were tested to estimate monthly air temperature of unobserved stations. Monthly measured data sets (minimum and maximum air temperature) from 588 automatic weather system(AWS) locations in South Korea were used to generate the gridded air temperature surface. As the result, temperature lapse rate improved accuracy of all of interpolation methods, especially, spline showed the lowest RMSE of spatial interpolation methods in both maximum and minimum air temperature estimation.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.7-10
• /
• 2008

We present a technique for constructing a digital elevation model (DEM) from contours. The elevation of each ground point in DEM is computed by interpolating the heights of the two adjacent contours of the point. The technique decomposes each sub-domain between adjacent contours into a set of sub-regions. The decomposition is accomplished by constructing a medial axis of the sub-domain. Each sub-region in the decomposition is classified into a variety of terrain features like hillsides, valleys, ridges, etc. The elevations of points are interpolated with different methods according to terrain features they belong to. For a given point in hillside, an approximate gradient line passing through the point is determined and the elevation of the point is interpolated from the known elevations of the two adjacent contours along the approximate gradient line. The univariate monotone rational Hermite spline is used for the interpolation. The DEM constructed by the technique is to be used to orthorectify the high-resolution KOMPSAT3 imagery.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.1
• /
• pp.41-50
• /
• 1990

The purpose of this thesis lies in proving the practicality of photogrammetry and in promoting photogrammetry in earthwork which plays a major role in civil engineering projects. Analysis of accuracy in the determination of ammount of earthework was done by applying interpolation methods in digital terrain model. As a result of analysis of the data acquisition method, in cross-section method produced acceptable accuracy from Simpson's three-eighths rule and prismoidal rule. In results DTM, we have obtained the fact that earthwork calculation accuracy was increased by applying two or more interpolation methods. Therefore, the method by digital terrain model using aerial photograph has proved to be more efficient.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.95-102
• /
• 2002

Spatial interpolation has become a common procedure in converting temperature forecasts and observations at irregular points for use in regional scale ecosystem modeling and the model based decision support systems for resource management. Neglection of terrain effects in most spatial interpolations for short term temperatures may cause erroneous results in mountainous regions, where the observation network hardly covers full features of the complicated terrain. A spatial interpolation model for daytime hourly temperature was formulated based on error analysis of unsampled site with respect to the site topography. The model has a solar irradiance correction scheme in addition to the common backbone of the lapse rate - corrected inverse distance weighting. The solar irradiance scheme calculates the direct, diffuse and reflected components of shortwave radiation over any surfaces based on the sun-slope geometry and compares the sum with that over a reference surface. The deviation from the reference radiation is used to calculate the temperature correction term by an empirical conversion formula between the solar energy and the air temperature on any sloped surfaces at an hourly time scale, which can be prepared seasonally for each land cover type. When this model was applied to a 14 km by 22 km mountainous region at a 10 m horizontal resolution, the estimated hourly temperature surfaces showed a better agreement with the observed distribution than those by a conventional method.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.51-56
• /
• 2011

In this paper, we presents an algorithm which restores lost data or increases resolution of a DTM(Digital terrain model) using fractal theory. Terrain information(fractal dimension and standard deviation) around the patch to be restored is extracted and then with this information and original data, the elevations of cells are interpolated using the random midpoint displacement method. The results of the proposed algorithm are compared with those of the bilinear and bicubic methods on a fractal terrain map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.393-400
• /
• 2009

Recently demand for the 3D modeling technology to reconstruct real world is getting increasing. However, existing geospatial data are mainly based on the 2D space. In addition, most of the geospatial data provide geometric information only. In consequence, there are limits in various applications to utilize information from those data and to reconstruct the real world in 3D space. Therefore, it is required to develop efficient 3D mapping methodology and data for- mat to establish geospatial database. Especially digital elevation model(DEM) is one of the essential geospatial data, however, DEM provides only spatially distributed 3D coordinates of the natural and artificial surfaces. Moreover, most of DEMs are generated without considering terrain properties such as surface roughness, terrain type, spatial resolution, feature and so on. This paper suggests adaptive and flexible geospatial data format that has possibility to include various information such as terrain characteristics, multiple resolutions, interpolation methods, break line information, model keypoints, and other physical property. The study area was categorized into mountainous area, gently rolling area, and flat area by taking the terrain characteristics into account with respect to terrain roughness. Different resolutions and interpolation methods were applied to each area. Finally, a 3D digital map derived from aerial photographs was integrated with the geospatial data and visualized.