• 대한의용생체공학회:의공학회지
• /
• 제14권4호
• /
• pp.315-320
• /
• 1993

This paper deals with a subject for implementation of L+ayer 1 and Layer 2(LAPD) of ISDN user-network interface on the basis of CCITT recommandation I.411, I.412, I.441 (Q.921), I.450(Q.930) and I.451 (Q.931) for ultrasonic image transfer. For the implementa tion of LAPD protocol of ISDN in this study. PC-CARD based hardware(TA :Terminal Adopt) is proposed and operating system (PC-XINU) supporting the Multiprocessing is transplanted to it. As the Service Access Point(SAP) is accessed by using the port of XINU and Layers which consist of transmitting and receiving part are independantly processed for each other in this proposed system. It can be easy and flexible to implement LAPD protocol for the message transfer.

• 한국식품과학회지
• /
• 제22권2호
• /
• pp.227-228
• /
• 1990

올찰(일반계)과 한강찰벼 (다수계)를 대상으로 $80-120^{\circ}C$에서의 취반속도를 분석하였다. 취반속도상수는 한강찰벼가 올찰보다 약간 큰 값을 보였으나 취반의 활성화에너지 값은 차이를 보이지 않았다. 취반온도 $100^{\circ}C$ 이하에서의 활성화에너지 값은 $100^{\circ}C$ 이상에서 보다 약 1.6배 큰 값이었다. 취반완료점으로부터 구한 z-값과 $Q_{10}$값도 서로 차이를 보이지 않았다.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 추계학술발표대회(하)
• /
• pp.807-810
• /
• 2003

현재 무선랜은 AP(Acess Point)간 이동시 2계층 로밍을 이용하여 이동성을 제공한다. 그러나 무선랜의 AP간 로밍은 같은 서브넷 내에서는 동일한 IP로 MAC Layer의 접속만을 변경하여 이동성을 제공할 수 있지만, 다른 서브넷으로 이동할 경우에는 DHCP를 이용하여 IP를 새로 할당 받아야 한다. 최근 Hotspot 등 무선랜이 활성화 되어감에 따라 서브넷간 이동시에도 IP 이동성 제공을 위해서는 무선랜에 Mobile IP 도입이 필요하다. 또한 무선 인터넷 사용자의 급증으로 차세대 인터넷 프로토콜로 주목받고 있는 IPv6를 이용하여 이동성을 제공하려는 연구가 활발히 진행되고 있다. 본 논문에서는 SIP 기반의 VoIP 단말기에 FMIPv6를 적용하여 VoIP의 서브넷 간이동성을 제공하기 위하여 핵심프로토콜인 FMIPv6 프로토콜과 SIP 프로토콜을 설계하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.50-56
• /
• 2005

This paper develops a sensorless BLDCM drive for frequently startup. The position information is based on detecting the zero-crossing point of the BEMF that can be directly obtained from the terminal voltage of the floating phase without voltage-dividing and filtering. As a result, this approach makes it possible to detect the rotor position over a wide speed range, especially at a lower speed. A fast startup procedure is also discussed because the induced BEMF signals are not present when motor is at rest. Experimental results shows that the schemes implemented are feasible and the performance achieved are satisfactory.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.339-349
• /
• 2000

Inchon Port is the second largest import-export port of Korea, and has the point at issue such as the excessive logistics cost because of the limits of handling capacity and the chronic demurrage. There are few research activities on the analysis and improvement of the whole port operation, because Inchon Port not only has the dual dock system and various facilities but also handles a various kind of cargo. The purpose of this paper is to develop the simulation program as a long-term strategic support tool, considering the dual dock system and the TU(Terminal Operation Company) system executed since March, 1997 in Inchon Port. The basic input parameters such as arrival intervals, cargo tons, service rates are analyzed and the probability density functions for these parameters are estimated. The main mechanism of simulation model is the discrete event-driven simulation and the next-event time advancing. The program is executed based on the knowledge base and database. From the simulation model, it is possible to estimate the demurrage status through analyzing various scenarios and to establish the long-term port strategic plan.

• 대한임베디드공학회논문지
• /
• 제15권3호
• /
• pp.111-118
• /
• 2020

We investigate the optimization problem of transmit power control and MMSE Receiver filter for multi access points environment. Previous work showed that increasing the number of access points decreases the transmit power consumption. Accordingly, transmit power control algorithm was developed in such a way that the transmit power is minimized, while each terminal meets Signal to Interference and Noise Ratio Requirement. In this work, we further reduce the transmit power consumption by optimizing the transmit power level and the MMSE receiver filter together. We showed that the proposed joint optimization algorithm satisfies the necessary and sufficient conditions to be standard interference function, which guarantees convergence and minimum transmit power consumption. We observed that the proposed algorithm outperforms the algorithm which only optimizes the transmit power.

• 전기의세계
• /
• 제31권2호
• /
• pp.132-140
• /
• 1982

Designing the capacitor-run motor for balanced operation is accompanied with the excessive capacitor value and low capacitor terminal voltage of condenser. As a solution for this problems, It was reported the design by equal volt-ampere method. The running characteristics of capacitor-run motor by this method due to the balancing point selection, however, has a room to be studied further. This paper deals with the determination of the winding ratio and capacitor value of a permarient-split capacitor motor by balanced operation and equal volt-ampere method at the different load points. The analysis of the running characteristics of a motor and its designing method also presented for both cases. It concluded that the running characteristics due to the equal volt-ampere operation are very close to the balanced operation.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1349-1355
• /
• 1999

A power distribution facility map is drawn on cadastral map. Besides, grid lines are added on the map for sectionalization. For automatic recognition of the map, we first extract recognizing regions. In this paper, we propose an extraction method of recognizing regions by partially extending thinned image. The proposed method is consist of three phases, binarization phase, thinning phase and partial extending phase. The first phase generate a binary image using threshold value which is obtained by histogram analysis. The binary image contains many part of recognizing regions, but not all. The second phase generate thinned image which is generated by appling thinning operator to the binary image. And the third phase extends thinned image from terminal point until satisfying termination condition. The proposed method is tested on several power distribution facility maps, and the results are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.104.2-104
• /
• 2001

In the intelligent integrated systems, the delay time must be reduced using highly parallel processors, as well as high throughput performance. In this paper, we propose a new concept for building 3D highly parallel processors using multi-layer printed wiring boards with built-in soldering heater (BISH-PWB). The proposed BISH is realized with the long and narrow cupper wiring pattern on the internal layer in the terminal pattern area. Based on the linearity of the cupper resistance vs. temperature, we can measure the BISH, temperature and its calorific value from the heater voltage and current measurements. If we provide the BISH temperature control systems for each BISH, selective multi-point soldering can be realized with same ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.167.2-167
• /
• 2001

This paper presents guidance and control laws which guarantee a minimum fuel consumption and have obustness against various disturbances during a terminal-landing phase on the lunar surface. The nonlinear robust tracking control system is designed to track the reference profiles, which are expressed by exponential functions. An adjustment law in the tracking controller is given in the form of the differential equations with respect to the controller´s variable gains. Computer simulations are performed to examine the tracking accuracy, the robustness in a thrust failure mode, and the vertical soft landing at a pre-assigned point on the lunar surface. The results of numerical simulation show the effectiveness of the present control law.