• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.153-154
• /
• 2020

It can be replaced with a smart work service centering on tasks that do not require on-site work among container terminal tasks. Here, the cloud service is helpful for small and medium-sized stevedoring companies as it reduces the cost and time required for initial system construction, and allows you to pay usage fees as needed. This study introduces a case study on the development of web services that comply with industry standards so that advanced ICT can be used in connection with the terminal operation system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.135-140
• /
• 2010

This paper presents a sensorless speed control of BLDC Motor using terminal voltage of the one phase. Rotor position information is extracted by indirectly sensing the back EMF from only one of the three terminal voltages for a three-phase BLDC motor. Depending on the terminal voltage sensing rotor position, active filter is used for position information. This leads to a significant reduction in the component device of the sensorless circuit. Therefore this is a advantage for the cost saving and size reduction. With indirect sensing methods based on detection of the terminal voltage that require active filtering, the position information needs the six divider section by PLL circuit, the binary counter and johnson counter by the EPLD. Finally, this algorithm can estimate the rotor position information similar to Hall-sensor sticked the three-phase BLDC motor. As a result, the method described that it is not sensitive to filtering delays, allowing the motor to achieve a good performance over a wide speed range. In addition, a simple starting method and a speed estimation approach are also proposed. Experimental and simulation results are included to verify the proposed scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.549-552
• /
• 2015

The Korean government establishes a strategy to develop the Busan New Port as a world ranking two transit-oriented port. This paper aims at presenting an efficient Inter-Terminal Transportation system in the Busan New Port as a method of achieving the government strategy. It proposes four systems to treat Inter-Terminal Transportation in the port; Double stack Multiple Trailer System (DMTS) Rail-based transportation system, Private road for Inter-Terminal Transportation, and platform for Inter-Terminal Transportation. This is shown to highly potential for efficient Inter-Terminal Transportation in the port.

• Journal of Navigation and Port Research
• /
• v.45 no.2
• /
• pp.75-86
• /
• 2021

This paper intends to evaluate the policies which are considered necessary to enhance the T/S competitiveness of Busan's port, and thereby present suggestions to the government which would best implement the results of this research. This research first raises the claim that the majority of the following four conditions: location of the port, port productivity/service level, status of network with overseas ports, and cost competitiveness, should be satisfied in order to maintain a competitive T/S port. Based on these four conditions, seven policies, which are individually pertinent to the four conditions, have been drawn up for proposal, and they are also analyzed in the survey, where all the eligible samples participate to ensure if they are effective in enhancing the T/S competitiveness of Busan. Proposed important policies are a) Terminal operator integration, b) port infrastructure expansion, c) global carriers owned terminal operation, d) enhancement of national carrier's competitiveness, e) feeder carriers' owned terminal operation in new port, f) institutional support for effective and convenient environments for handling T/S cargo, and g) volume incentive expansion. From the analysis by which all the relevant parties (Carriers, Terminal Operators, Port Authority) are answered, it was found that all the seven policies have relevance in strengthening the transshipment competitiveness of Busan's port. Whereas in the analysis that uses AHP methodology to compare the significance among the different policies, it was found that terminal operator integration has the highest priority in terms of increasing transshipment competitiveness.

• Journal of Korean Port Research
• /
• v.5 no.2
• /
• pp.19-37
• /
• 1991

This work aims to : establish a model of the container physical distribution system of Pusan port comprising 4 sub-systems of a navigational system, on-dock cargo handling/transfer/storage system, off-dock CY system and an in-land transport system : examine the system regarding the cargo handling capability of the port and analyse the cost of the physical distribution system. The overall findings are as follows : Firstly in the navigational system, average tonnage of the ships visiting the Busan container terminal was 33,055 GRT in 1990. The distribution of the arrival intervals of the ships' arriving at BCTOC was exponential distribution of $Y=e^{-x/5.52}$ with 95% confidence, whereas that of the ships service time was Erlangian distribution(K=4) with 95% confidence, Ships' arrival and service pattern at the terminal, therefore, was Poisson Input Erlangian Service, and ships' average waiting times was 28.55 hours In this case 8berths were required for the arriving ships to wait less than one hour. Secondly an annual container through put that can be handled by the 9cranes at the terminal was found to be 683,000 TEU in case ships waiting time is one hour and 806,000 TEU in case ships waiting is 2 hours in-port transfer capability was 913,000 TEU when berth occupancy rate(9) was 0.5. This means that there was heavy congestion in the port when considering the fact that a total amount of 1,300,000 TEU was handled in the terminal in 1990. Thirdly when the cost of port congestion was not considered optimum cargo volume to be handled by a ship at a time was 235.7 VAN. When the ships' waiting time was set at 1 hour, optimum annual cargo handling capacity at the terminal was calculated to be 386,070 VAN(609,990 TEU), whereas when the ships' waiting time was set at 2 hours, it was calculated to be 467,738 VAN(739,027 TEU). Fourthly, when the cost of port congestion was considered optimum cargo volume to be handled by a ship at a time was 314.5 VAN. When the ships' waiting time was set at I hour optimum annual cargo handling capacity at the terminal was calculated to be 388.416(613.697 TEU), whereas when the ships' waiting time was set 2 hours, it was calculated to be 462,381 VAN(730,562 TEU).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.229-236
• /
• 2009

This paper intended to find rational alternatives for contracting-out of duties of the Busan port Pier Management Corporation, which is facing the merger and abolition, and of which main functions include the management of port facilities such as International Passenger Terminal, Cruise Terminal and Coast Passenger Terminal. This paper searched appropriate term, needs (merits), proper scope and cost of the contracting-out of that port facilities. The result of the analysis indicated that the best policy is to privatize the Busan port Pier Management Corporation itself to make it an private incorporated company.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.11-20
• /
• 2002

The tendency of the technology that is aggregated voice and data circuit is VoP, especially VoIP. But if we try VoP, we have to throw away well structured and well known TDM resources. In this case CLEC and ILEC will encounter lots of troubles about standardization of progress of network evolution, heavy cost of network construction and so on. Therefore in this paper, I suggest designing VoDSL terminal and its operation environment (such as DSLAM) based on TDM. This designed VoDSL terminal can be installed with the DSLAM between PSTN and ISP without any additional facilities. This is more convenient low cost, operation and easier to construct than VoP.

• Proceedings of KOSOMES biannual meeting
• /
• 2009.06a
• /
• pp.95-103
• /
• 2009

This paper intended to find rational alternatives for contracting-out of duties of the Busan port Pier Management Corporation. tint is facing the merger and abolition, and whose main functions include the management of port facilities such as International Passenger Terminal, Cruise Terminal, and Coast Passenger Terminal. For this purpose. the paper searched appropriate term, needs (merits), proper scope and cost if the contracting-out of that port facilities. The result of the analysis indicated that the best policy is to privatize the Busan port Pier Management Corporation itself to make it an private incorporated company.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.15-27
• /
• 2011

The canals of China·Northern Europe are different from those of Korea in the phases of the times and physical environment as follows. As the coefficient of river regime is high and the slopes of river is high in our country, the sediments are much deposited on the floor and river channels are meandered and the depth of water are low. So we should dredge the river floor and should construct the dams and lock gates. These will cause streams to be late and to be flooded. The rising and falling of groundwater tables may be fatal to the buildings. The ecosystem will be ruined by water pollution and rising of water levels. We are concerned about the economy of the canals, the low velocity of the canals, reduction of the transportation cost, transshipment cost and terminal cost, tourism·leisure-typed waterway and extreme cost of waterway development. It is proper for us to put in good order and control waterway simply by means of annual schedule, not to construct canal.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.2
• /
• pp.61-68
• /
• 2006

Many researchers have worked for the sensorless control of SynRM in recent years. However they commonly requires large calculations which induced from its complexity. For low cost application as like home appliance, it is difficult to utilize because of the cost problem. Therefore, it is necessary to introduce simplified sensorless control scheme that is composed of least calculation to estimate the rotor position. In this paper the sensorless control is performed using the characteristics of SynRM structure in which the linkage flux varies with rotor position, so the rotor position can be detected by the change of linkage flux. The estimation of linkage flux can be acquired from the integration of the motor terminal voltage which is commonly used method for the reliability of the estimation. However this estimation method has demerits in low speed operation therefore in that region the motor terminal voltage is compensated by the phase current. A digital simulation (MATLAB) and experiment were performed to confirm the adequacy of the proposed control scheme.