• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.4
• /
• pp.231-236
• /
• 2013

This study was conducted to investigate the yield response of soybean to drought stress in 1984 and 1986 at the experiment field of the National Academy of Agricultural Science using experiment plots with different soil water tension and fertilizer levels. The average yield response factor (YRF) of soybean to evapotranspiration (ET) calculated as [(Ya/Ym)/(ETa/ETm)], where Ya, average yield; Ym, maximum yield; ETa, average ET; and ETm, maximum ET, was 0.91 with the range from 0.74 to 1.16. Relationship between yield index (YI=[Ya/Ym]) and evapotranspiration index (ETI=[ETa/PET]) was $YI=0.87{\cdot}(ETI)+0.09$. Relationship between YI and the maximum soil water tension (Hmax) was $YI=1.23-0.23{\cdot}{\log}$ (Hmax). Relationship between YI and the days of drought stressed (Dr) was $YI=0.877{\cdot}{\exp}$ ($-0.01{\cdot}Dr$). The relation between YI and fertilizer level (F) was $YI=-0.21{\cdot}F2+0.36{\cdot}F+0.33$, under very serious drought condition as the maximum soil water tension was 0.3 MPa.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.27-33
• /
• 2002

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.146-150
• /
• 2005

In this paper, friction of air-jet textured yams is investigated. Using a friction measuring apparatus fabricated inhouse, dynamic friction forces of the yams under yarn-to-metal (YM) and yam-to-yam (YY) rubbing modes are measured. The influence of processing variables of air-jet texturing viz., overfeed, air pressure, dry/wet texturing and normal/core-and-effect texturing on dynamic friction is analysed. The results indicate that friction force increases with increasing rubbing speeds and yam input tension. YM dynamic friction decreases initially and then starts to increase at higher overfeeds. YY dynamic friction increases with increasing overfeed. YM dynamic friction decreases with an increase in air pressure while an opposite trend is observed for YY friction. Wet textured yams have higher friction than dry textured yams. Core wetted coreand-effect textured yams have higher friction than normal textured yams.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.43-49
• /
• 1999

Separation of soluble oil was investigated during filtration of cutting oil emulsion using various commercial ultrafiltration membranes. The surface properties of membranes used were hydrophilic hydrophobic and modified surfaces by various surfactant pretreatments. Conditions varied include stirring speed transmeembrane pressure membrane type and surfactant type for pretreatment. The results give some indication of mechanisms occurring at the membrane surface. Surfactant pretreatments significantly improved water flux and UF flux of hydrophilic regenerated cellulose(up to 2.4x for YM100) and hydrophobic polysulfone (up to 2.2x for PTHK) membranes depending on surfactant type and operating conditions. The UF flux enhancement was attributed to membrane swelling and reduction of interfacial surface tension between oil droplets and membrane surface. unexpectedly the hydrophilic membranes revealed greater flux enhancement than the hydrophobic membranes. The results also showed a greater improvement in UF flux at lower operating pressure.