• Computers and Concrete
• /
• v.20 no.6
• /
• pp.663-670
• /
• 2017

The post-tensioned (PT) flat plate slab system is commonly used in practice, and this simple and fast construction method is also considered to be a very efficient method because it can provide excellent deflection and crack control performance under a service load condition and consequently can be advantageous when applying to long-span structures. However, a detailed design guideline for evaluating the lateral behavior of the PT flat plate slab system is not available in current design codes. Thus, typical design methods used for conventional reinforced concrete (RC) flat plate slab structures have inevitably been adopted in practice for the lateral load design of PT flat plate structures. In the authors' previous studies, the unified equivalent frame method (UEFM) was proposed, which considers the combined effect of gravity and lateral loads for the lateral behavior analysis of RC flat plate slab structures. The aim of this study is to extend the concept of the UEFM to the lateral analysis of PT flat plate slab structures. In addition, the stiffness reduction factors of torsional members on interior and exterior equivalent frames were newly introduced considering the effect of post-tensioning. Test results of various PT flat plate slab-column connection specimens were collected from literature, and compared to the analysis results estimated by the extended UEFM.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.105-112
• /
• 2019

In addition to the recent business field, the importance of leadership in universities is becoming an increasingly important issue. Purpose of our study is to recommend the significance of authentic leadership by analyzing the effect of leader 's authentic leadership on follower' s project work climate and project performance. As a result of the previous studies that authentic leadership among university students as a quasi-social worker mitigates the role of leader and the tension between the members in the team, this study tries to examine the moderation effect of work climate on the relationship between the follower's authentic leadership and project performance. Therefore, a survey was conducted for students enrolled in some universities. A total of 175 questionnaires were used for the structural equation using STATA 14.0. The results of this study is summarized in three points. Our finding is as follow. The authentic leadership of the leader has a positive influence on the follower' s authentic leadership while the followers' authentic leadership had a positive effect on the project performance.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.45-52
• /
• 2017

The precast concrete (PC) method has many advantages in fast construction, quality control, etc. In domestic construction market, however, its application has been quite limited because of the concerns about structural integrity and seismic performances due to the discrete connections between precast concrete members. By applying the post-tensioning method, the precast beam-column connection can be well tightened, allowing improved structural integrity, and proper seismic performances can be also achieved. In this study, reversed cyclic tests have been conducted on the beam-column connection specimens, where the test variables included the compressive strength of grouting mortar and the tensile strengths of prestressing strands, based on which their seismic performances have been examined in detail. The post-tensioned PC beam-column connections showed good seismic performances comparable to that of the monolithic reinforced concrete connection specimen. When 2400 MPa prestressing strands are applied to the beam-column connection, it is preferable to adjust the prestress level similar to that applied for the 1860 MPa prestressing strands to avoid premature local crushing failures at the beam-column connections.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.3
• /
• pp.41-49
• /
• 2022

Background: In patients with forward head posture (FHP), the head is positioned forward, causing increased tension in the muscles and structures of the head, neck, and shoulders. This can result in joint dysfunction that may lead to abnormal afferent information. The purpose of this study was to investigate the effect on foot pressure through the isometric hip abduction (IHA) bridge exercise using elastic bands in patients with FHP. Methods: Twenty patients with FHP were randomly assigned to a study group that applied joint mobilization, soft tissue mobilization, a deep neck flexor strengthening exercise, and the IHA bridge exercise using an elastic band. A control group was also constituted, and members were given joint mobilization, soft tissue mobilization therapies, and the deep neck flexor strengthening exercise. Ten patients were assigned to each group. The static foot pressure and dynamic foot pressure of each patient were measured before and after the intervention, and the interventions for each group were applied twice a week for 4 weeks. Results: Both the study group and the control group showed significant differences in static and dynamic foot pressure before and after the interventions (p<.05). There were no significant differences in foot pressure between the study and control groups. Conclusion: : The results of this study revealed that there were no significant differences between the group doing the IHA bridge exercise using the elastic band and the control group. However, the intervention methods applied to both the groups were effective in improving the body center control of FHP patients.

• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.107-120
• /
• 2022

The bracing members capable of active control against seismic loads to reduce earthquake damage have been widely utilized in construction projects. Effectively reducing the structural damage caused by earthquake events, bracing systems equipped with retrofitting damper devices, which take advantage of the energy dissipation and impact absorption, have been widely used in practical construction sites. Shape Memory Alloys (SMAs) are a new generation of smart materials with the capability of recovering their predefined shape after experiencing a large strain. This is mainly due to the shape memory effects and the superelasticity of SMA. These properties make SMA an excellent alternative to be used in passive, semi-active, and active control systems in civil engineering applications. In this research, a new system in diagonal braces with slit damper combined with SMA is investigated. The diagonal element under the effect of tensile and compressive force turns to shear force in the slit damper and creates tension in the SMA. Therefore, by creating shear forces in the damper, it leads to yield and increases the energy absorption capacity of the system. The purpose of using SMA, in addition to increasing the stiffness and strength of the system, is to create reversibility for the system. According to the results, the highest capacity is related to the case where the ratio of the width of the middle section to the width of the end section (b₁/b) is 1.0 and the ratio of the height of the middle part to the total height of the damper (h₁/h) is 0.1. This is mainly because in this case, the damper section has the highest cross-section. In contrast, the lowest capacity is related to the case where b₁/b=0.1 and the ratio h₁/h=0.8.

• Smart Structures and Systems
• /
• v.29 no.1
• /
• pp.17-28
• /
• 2022

The cable component of cable-stayed bridges is gradually impacted by weather conditions, vehicle loads, and material corrosion. The stayed cable is a critical load-carrying part that closely affects the operational stability of a cable-stayed bridge. Damaged cables might lead to the bridge collapse due to their tension capacity reduction. Thus, it is necessary to develop structural health monitoring (SHM) techniques that accurately identify damaged cables. In this work, a combinational identification method of three efficient techniques, including statistical analysis, clustering, and neural network models, is proposed to detect the damaged cable in a cable-stayed bridge. The measured dataset from the bridge was initially preprocessed to remove the outlier channels. Then, the theory and application of each technique for damage detection were introduced. In general, the statistical approach extracts the parameters representing the damage within time series, and the clustering approach identifies the outliers from the data signals as damaged members, while the deep learning approach uses the nonlinear data dependencies in SHM for the training model. The performance of these approaches in classifying the damaged cable was assessed, and the combinational identification method was obtained using the voting ensemble. Finally, the combination method was compared with an existing outlier detection algorithm, support vector machines (SVM). The results demonstrate that the proposed method is robust and provides higher accuracy for the damaged cable detection in the cable-stayed bridge.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.15-24
• /
• 2022

In this research, the case of modern wooden structures since 1950 with span of 30m or more was investigated and analyzed the construction status and structural planning characteristics of wooden large space architecture. As a result, wooden large space buildings have built around Asia, North America, and Europe, in which cases of ice skating stadiums with span of 30m to 60m were concentrated. In the case of baseball parks and football stadiums, even a span of about 165m was built in a wooden structure. In addition, it was found that the structural systems used in wooden large space structures were a funicular arch and truss structure, in that cases, funicular arch system consisting of radial arrangements was used in the examples exceeded 150m and the two way truss system was also used in long span wooden structures exceeding 100m. As the truss structure with a tie-rod or the flexure+tension structure was partially investigated, it can be seen that various timber structural systems need to be devised and researched. Also, It was investigated that a technique in which some members of the truss are made of steel or a composite member of steel and timber is also possible to develop

• Steel and Composite Structures
• /
• v.46 no.3
• /
• pp.403-416
• /
• 2023

This paper summarised and re-examined the theoretical basis of the commonly used design rule developed by Cochrane in the 1920s to consider staggered bolt holes in tension members, i.e., the s²/4g rule. The rule was derived assuming that the term two times the bolt hole diameter (2d₀) in Cochrane's original equation could be neglected, and assuming a value of 0.5 for the fractional deduction of a staggered hole in assessing the net section area. Although the s²/4g rule generally provides good predictions of the staggered net section area, the above-mentioned assumptions used in developing the rule are doubtful, in particular for a connection with a small gauge-to-bolt-hole diameter (g/d₀) ratio. It was found that the omission of 2d₀ in Cochrane's original equation appreciably overestimates the net section area of a staggered bolted connection with a small g/d₀ ratio. However, the assumed value of 0.5 for the fractional deduction of a staggered hole underestimates the staggered net section area for small g/d₀ ratios. To improve the applicability of the above two assumptions, a modified design equation, which covers a full range of g/d₀ ratio, was proposed to accurately predict the staggered net section area and was validated by the existing test data from the literature and numerical data derived from this study. Finally, a reliability analysis of the test and numerical data was conducted, and the results showed that the reliability of the modified design equation for evaluating the net section resistance of staggered bolted connections can be achieved with the partial factor of 1.25.

• Journal of English Language & Literature
• /
• v.57 no.3
• /
• pp.473-493
• /
• 2011

This paper aims, first, to trace the trajectory of Sebastian Barry's dramatic works in terms of retrieving the hidden (hi)stories of his family members, and second, to analyze his most successful play to date in both critical and commercial senses, The Steward of Christendom, in terms of the tension or even rupture between Irish national history and the dramatic representation of it. If contemporary Irish drama as a whole can be seen as an act of mirroring up to nation, Barry's is a refracting than reflecting act. Whereas modern Irish drama tends to have helped, however inadvertently, consolidate the nation-state by imagining Ireland through its other (either in the form of the British empire or the Protestant Unionist north), Barry's drama aims at cracking the surface homogeneity of Irish identity by re-imagining "ourselves" (a forgotten part of which is a community of southern Catholic loyalists). Furthermore, the "ourselves" re-imagined in Barry's drama is more fractured than unified, irreducible in its multiplicity than acquiescent in its singularity. The playwright's foremost concern is to retrieve the lives of "history's leftovers, men and women defeated and discarded by their times" and re-member those men and women who have been expunged from the imagined community of the Irish nation. This he does by endowing "every life" with "an after-life" and "every demon" with "a fairy tale." The Steward of Christendom is Barry's dramatic attempt to bestow upon the historically demonized Thomas Dunne, an Irish policeman in the British Empire, his fairy-tale redemption.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.727-735
• /
• 2012

Recently, a high-strength strand of 2400 MPa was developed using domestic technologies. In 2011, KS D 7002 was revised to cover the newly developed high-strength strands to support their practical usage. Presently, however, discussions and evaluations are not sufficient on the mechanical properties of the strands and their performance in structural members. Also, there were no detailed reviews on the need to revise the current design code for practical use of the high-strength strands. In this study, flexural behavior of a member with the high-strength strands was estimated through sectional analysis and a review and comparison of the domestic and foreign design codes were conducted considering the analysis results. Also, the need for the revision of the design code was discussed. Such discussion especially focused on the estimation of the stress in strand, which related with various issues such as determination methods for yield point of strands, time-dependent loss of prestressing force, estimation of stress in strand at member failure, and net strain limit for ductile failure of member. The discussion revealed that some parts in the design code need a revision and the further studies are required.