• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권2호
• /
• pp.151-156
• /
• 2008

Different kinds of forces can be applied to the biological tissue. The analysis of the applied force is highly important to explain the mechanism of cellular response. In this study, the applied force to the collagen gel was analyzed by the finite elements analysis. The model received two different kinds of static force (compression and tension). The force range was 50g to 400g. In results, von Mises stress was concentrated in the peripheral region in the compression model. It was concentrated in the central area in the tension model. However, the compressive force was high in the peripheral area of the compression model and the tensional force was also high in the same area of the tension model. In conclusion, the applied force could be different to the region and it should be considered in the experiment to analyze the effects of the mechanical force on the cells.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.690-696
• /
• 1996

In order to study the affect of surfactants on the soil removal, the dispersion and polar force components of surface tension for surfactant solutions (such as LAS, AS, AOS, AES, AE) were calculated using extended Fowkes equation. The contact angles on paraffin and surface tension of surfactant solutions were measured. Cmcs of LAS, AS, AES and AE were below the concentration of 0.05%, but the cmc of AOS was between 0.05% and 0.1%. The surface tension of AE was lowest but the dispersion force component was greastest. Total surface tension of every mixed anionic surfactant was lower than that of single surfactants, and the dispersion force components were almost decreased. The addition of sodium carbonate to the sufactant solutions decreased the surface tension, and the surface tensions of surfactant solutions were lowered after washing.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.7-15
• /
• 2007

A mechanical model was developed to predict the behavior of point-loaded RC slender beams (a/d > 2.5) without stirrups. It is commonly accepted by most researchers that a diagonal tension crack plays a predominant role in the failure mode of these beams, but the failure mechanism of these members is still debatable. In this paper, it was assumed that diagonal tension failure was triggered by the concrete cover splitting due to the dowel action at the initial location of diagonal tension cracks, which propagate from flexural cracks. When concrete cover splitting occurred, the shape of a diagonal tension crack was simultaneously developed, which can be determined from the principal tensile stress trajectory. This fictitious crack rotates onto the crack tip with load increase. During the rotation, all forces acting on the crack (i.e, dowel force of longitudinal bars, vertical component of concrete tensile force, shear force by aggregate interlock, shear force in compression zone) were calculated by considering the kinematical conditions such as crack width or sliding. These forces except for the shear force in the compression zone were uncoupled with respect to crack width and sliding by the proposed constitutive relations for friction along the crack. Uncoupling the shear forces along the crack was aimed at distinguishing each force from the total shear force and clarifying the failure mechanism of RC slender beams without stirrups. In addition, a proposed method deriving the dowel force of longitudinal bars made it possible to predict the secondary shear failure. The proposed model can be used to predict not only the entire behavior of point-loaded RC slender shear beams, but also the ultimate shear strength. The experiments used to validate the proposed model are reported in a companion paper.

• 문화기술의 융합
• /
• 제9권4호
• /
• pp.549-555
• /
• 2023

공용중인 고속철도의 PSC Box 교량의 긴장력 관리는 교량 성능에 있어 매우 중요한 기능으로 교량 유지관리시 세밀한 관리가 필요하다. 이에 본 연구에서는 열차(활하중) 재하시험 없이 측정한 상시처짐 결과를 이용하여 PSC Box girder 내부의 긴장력 감소 수준과 긴장력 손실에 다른 재긴장 예측 시기를 연구하고자 한다. PSC Box 거더의 긴장력 감소에 따른 재긴장 시기 예측결과, 준공 이후 약 17년 이전에서는 긴장력 감소(Jacking force loss) 곡선이 완만한 것으로 나나낫다. 그러나 17년 이후에서는 긴장력 감소 곡선이 급격하게 변화되는 것으로 나타났다. 따라서 공용연수 증가에 따라 긴장력이 감소하는 것으로 확인되었고, 구조물의 노후화가 진행될수록 긴장재의 손신을 더 급격하게 증가되는 것으로 분석되었다. 향후 공용중인 PSC Box 교량중에서 준공 이후 18년 이상 경과된 구조물의 경우 긴장재 및 주변 손상에 대한 정밀조사가 필요할 것으로 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.153-162
• /
• 2004

The force profile from strip to work roll is very important factor in deformation of roll. But It is not easy to predict the profile because strip crown affect its tendency. From finite element method result, some assumptions can be obtained and the roll force profile model is derived. Also the tension profile and lateral strain are derived. The prediction accuracy of the proposed model is examined through comparison with finite element calculation result.

• 소음진동
• /
• 제8권2호
• /
• pp.324-330
• /
• 1998

The forced vibration analysis of the outer-clamped spinnig annular disk with arbitrary in-plane is formulated to investigate the influence of non-uniform tension on the cutting accuracy of wafer cutting machine. The arbitrary in-plan force along the outer edge of an annular plate is expressed as a Fourier series. Galerkin method and modal superposition method are employed to obtain the forced responses under the static force and the impulse force in astationary coordinate. Through qualitative and quantitative analyses, it can be found that forced and impulse responses are sensitive to the non-uniformity of in-plane force, which can bring a bad effect to the accuracy of wafer cutting process. Also, in case of a spinning disk with non-uniform in-plane force, critical speed is required to define in a different way, compared with conventional definition in axi-symmetrical spinning disk.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.503-509
• /
• 1999

This paper proposes a new speed and tension control algorithm for multi-span continuous strip processing line. In this algorithm the speed reference of each roll is adjusted to make the output force follow the load balance reference using an outer loop controller in cascade. Using the information of the output force of the adjacent roll, it is shown that the strip tension between two rolls can be controlled as the desired value without tension sensor. An experimental set-up which consists of 4 driven and 3 measuring rolls is designed and built for the multi-span speed and tension control. The experimental result reveals conspicuous improvement of tension control performance by the proposed algorithm comparing to the conventional tension feedback controller.

• 한국강구조학회 논문집
• /
• 제15권4호통권65호
• /
• pp.435-445
• /
• 2003

인장구조물에서의 인장재는 가장 중요한 부재임에도 불구하고, 현재 인장재에 발생하는 현장에서 효과적으로 측정하는 방법에는 어려운 점이 많다. 기존의 측정방법으로는 일시적 또는 특정부재의 측정은 가능하지만 전체부재의 측정과 장기간 측정은 불가능하다. 이에 인장재의 인장력을 측정하기 위한 방법을 제시하고, 인장력이 작용하였을 때 탄성상태에서 부재가 선형적으로 변형하는 성질을 이용하여 인장재의 인장력을 효과적으로 측정하기 위한 방법을 제시하였다. 또한 측정장치의 개발에 필요한 자료를 제공하고자 유한요소해석을 수행하였고, 시험체를 제작하여 실험을 실시하여 해석의 결과를 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권6호
• /
• pp.162-170
• /
• 2010

토크쉬어볼트의 토크계수는 환경요인에 의해 영향을 받는다. 습기, 녹, 시공중의 작업성 등. 토크쉬어볼트의 토크계수의 변동에 기인하여 볼트에 도입된 축력을 예측하는 매우 어렵다. 이런 이유로 시공중인 볼트 축력을 측정하고, 체결력을 검증하는 것은 필수적이다. 이 연구에서, 볼트에 도입된 하중을 확인하기 위해 시작품 제작이 계획되었다. 시작품의 알고리즘은 토크쉬어 전동렌치에서 얻은 전기에너지와 유압축력기에서 얻은 축력과의 상관관계를 구성한 것이다. 직접축력을 계측하는 회귀분석식은 미니탭 프로그램을 이용한 통계학적인 분석방법에서 구한 것이다. 이 시작품은 상용 토크렌치에 견줄만한 인장력을 평가하는 신뢰성이 있는 도구라고 판단된다.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.45-52
• /
• 1998

The contact roll is often used to regulate the winding tension as well as the entrained air in a wound roll by adjusting the contact force to the winding roll. But the contact force generated by other rolls, like assistant nip rolls, in a winding(or roll changing) process may act as disturbance to the control of the winding tension. In this paper, the mechanism of a roll change process is analysed. Ana, the behavior of the contact and the nip rolls are mathematically modeled. A nonlinear PID(NPID) controller is designed to control the winding tension and to reject the effect of disturbance generated by the nip roll on the winding tension variation. Computer simulation study showed that the performance of the suggested NPID controller is improved compared with that of the PID controller in controlling the winding tension and in rejecting the effect of the disturbance.