• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.164-172
• /
• 1994

The purposes of the study are to formulate a mathematical model of mechanical tension arm system including supply reel and capstan system, and to simulate dynamic reponse according to parameter variations of the componests in tension arm system. Experiments were carried out in order to prove the validity of the mathematical model. From the results of simulations and experiments, dynamic responses of tape tension and displacement of tension post were analyzed during entire playing mode and they showed the basic characteristics of the tension arm system.

• 국제물리치료학회지
• /
• 제11권3호
• /
• pp.2140-2146
• /
• 2020

Background: Stroke patients exhibit arm global synkinesis (GS), involuntary movement due to muscle weakness and irregular muscle tension. But currently there are few studies examined the effects of GS on activates of daily living in stroke patients. Objectives: To investigate the effects the effects of task-oriented bilateral movements, which promote brain plasticity and are based on neurological theory, using the unaffected arm and the affected arm. Design: Quasi-randomized trial. Methods: Twenty stroke patients were randomly assigned to experimental group I (n=10) and experimental group II (n=10). Before the intervention, arm GS was measured using surface electromyography, and the Motor Activity Log evaluated the quantitative and qualitative uses of the affected arm in daily life. The same items were measured four weeks later. Results: The changes in the GS of the arm of experimental group I showed statistically significant differences only in bending motions (P<.05). Both groups showed statistically significant differences in the amount of use (AOU) and the quality of movement (QOM) scores (P<.01). Comparing the groups, statistically significant differences in GS appeared during bending motions (P<.05), and in the AOU (P<.01) and the QOM scores (P<.05). Conclusion: The intervention in GS reduced the abnormal muscle tension of the affected side by increasing the use of the ipsilateral motor pathway, indicating its effectiveness in improving upper limb functions with smooth contraction and relaxation of the muscles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.169-169
• /
• 2000

The modeling for the looper of a hot strip finishing mill to control the tension of the strip is presented. The looper is an arm pushing against the strip between stands in a tandem mill to keep the strip tension constant and to isolate the interactions of the adjacent stands. Tension is influenced by the difference in mass flow through the up stream and down-stream rolling stands. Tension is critical to strip quality, influencing width, gauge, and shape. This paper presents how looper angle and strip tension are controlled for a hot strip finishing mill.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1742-1746
• /
• 2014

In order to develop a overhead catenary system for the maximum speed of 400 km/h on Honam high-speed line, increasing tension of contact wire, changing dropper distributions, reducing a hard point and etc. should be considered. And it is also essential to develop core components taking account of the increased tension. Therefore we developed a new steady arm for the max. speed of 400 km/h in this study. FEM (Finite Elements Method) analysis was performed to ensure the strength of the arm. An oval shape was applied to the arm, so that 25 % of strength was increased and 9 % of weight was decreased. And a type test according to the code KRSA-3012 was performed to ensure the performance. Fatigue test in KRRI (Korea Railroad Research Institute)'s test-bed was also performed to evaluate its performance. Some section of the Honam High-speed line was constructed with the developed steady arm.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.205-215
• /
• 2001

In this study, modeling and analysis procedure for the dynamic analysis of a high mobility tracked vehicle system were studied. The vehicle model used in this investigation is assumed to be consist of two kinematically decoupled subsystems. The chassis subsystem consists of chassis frame, sprocket, support rollers, road wheels, idler wheel, road wheel arms and idle wheel arm, while the track subsystem is represented as a closed kinematic chain consisting of track links and end connectors interconnected by revolute joints with bushing. Nonlinear contact force module describing the interaction between track link, and sprocket, idler wheel, road wheel, support roller, ground was used. The effects of road wheel arms and idler wheel arm due to tension adjuster are also considered.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.281-282
• /
• 2006

Tension control performance is very important in high-speed printing machine. One of the major factors that effect to tension control performance is the process of roll changing. Even if the turret arm moves during roll changing process and the span length of the unwinding system varies, it is customary to neglect it in motion and tension control and to consider it as a disturbance. In this paper, its effect is modeled nonlinearly and compared with linear model, and an effect of an infeeder dancer is analyzed under the condition with no unwinder dancer. We verify the performance of the proposed method via simulation in the high-speed printing machine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.201-206
• /
• 1993

Four reinforced concrete beams without shear reinforcement were tested statically up to failure to investigate the arch action in reinforced concrete beams. Major variable was the shear span to depth ratio varied from 2 to 4. Due to the reduction of internal moment arm length by the development of arch action, the measured steel tension was higher than the calculated steel tension.

• 한국방재안전학회논문집
• /
• 제15권3호
• /
• pp.67-77
• /
• 2022

국내에서는 I형 거더의 장경간화를 위한 수단으로써 U형 거더 개발을 시도하였으나, 포스트텐션 긴장방식에 따라 큰 자중으로 인하여 30 m이하 철도교 적용 사례가 대표적이며, 도로교는 시공 편의성과 보급성 논리에 따라 U형 거더의 적용 사례는 많지 않다. 본 연구는 이러한 포스트텐션 방식에 제한을 두지 않고 프리텐션 방식을 적용하여 단면 감소에 따른 자중 감소와 사용재료 절감을 유도하고자 한다. 또한, U형 거더 내부 반력대를 이용한 현장 프리텐션 긴장방법을 적용하고자 한다. 프리스트레스트 콘크리트 U형 단면 거더 교량은 콘크리트 바닥판 슬래브와 합성단면으로 구성된다. 단면이 폐합되어 개방형 단면인 PSC I형 대비 저항 강성 등의 구조적 성능향상과 제작 및 가설 단계에서 시공의 안전성 증대, 그리고 자중 경감에 기인하는 형고비 감소와 교량의 미적 경관성 확보가 가능하여 매우 효율적이고 경제적인 교량이다. 이로 인하여 고품질의 공장제작 부재와 현장에서 일체 타설로 효율적인 시공이 가능할 것으로 기대된다. 본 논문에서는 프리텐션 현장 긴장 방식 소개 및 긴장을 위한 정착블럭의 해석적 성능 검증에 대한 내용을 수록하였다.

• 근관절건강학회지
• /
• 제8권2호
• /
• pp.302-322
• /
• 2001

This study was carried out in order to examine the health status of arthritis patients living in K city of southern part of Korea. The data were collected with AIMS2 instrument from 56 subjects who were asked to complete the questionnaire by the trained surveyor. The AIMS2 has been approved useful instrument for assessing the outcome of various treatments and programs in rheumatic diseases. The component variables of the AIMS2 are Mobility, Walking and Bending, Hand and finger function, Arm function, Self-care tasks, Household tasks, Social activity, Support from family and friends, Arthritis pain, Work, Mood, Level of tension, The total number of items of AIMS 2 are 78. The results are as follows: The average age of the subjects was 58 years old and no gender difference. The mean scores of the 12 sub-concepts of AIMS2 are 15.0 of mobility, 12.16 of walking and of bending, 9.32 of hand and finger function, 9.03 of arm function, 13.53 of self-care tasks, 10.19 of household tasks, 15.09 of social activity, 19.58 support from family and friends, 13.82 of arthritis pain, work, 14.85 of level of tension, 15.12 of mood. The Cronbach Cronbach $\alpha$. is 0.72-91 for RA patients and 0.74-96 for OA patients. This results showed that the health status of Arthritis patients at home in K-city was almost not so serious, but the level of tension and mood were quite higher than the average score. Considering the results of this particular subjects, an appropriate rehabilitation program should be developed and implemented.

• The Korean Journal of Pain
• /
• 제9권1호
• /
• pp.105-108
• /
• 1996

Localized or radiating pain in the arm and shoulder joint may result after faulty alignment causing compression or tension on nerves, blood vessels, or supporting soft tissues. The critical site of faulty alignment is the quadrangular space in the axilla bounded by the teres major, teres minor, long head of triceps, and humerus. The axillary nerve emerges through this space to supply the deltoid and teres minor. The activity of the trigger point on teres minor compressing the axillary nerve causes pain to develop through the area of sensory distribution of cutaneous branch of the axillary nerve. Relieving compression on the axillary nerve and suprascapular nerve is the key point to relieving the pain. Spasm of the supraspinatus and infraspinatus compressing the suprascapular nerve caused pain to develop in the shoulder joint and scapular area. We treated those patients experiencing such pain with local anesthetic infiltration or I-R laser stimulation on the identified trigger points.