• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.337-341
• /
• 2006

The tensile properties of Poly(trimethylene terephthalate, PTT) $1{\times}1Rib$ knitted fabrics were experimentally studies, and the specimens has $1{\times}1$ rib stitched structure which are weft knitted fabrics with various lengths of loop. The $1{\times}1$ rib weft knitted fabric showed larger tensile linearity, tensile energy and tensile resilience in the direction of courses. The tensile properties increased with increasing the loop density in all directions, and perfectly increased with the course directions than the wale directions.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2000

The tensile properties of polyester warp knitted fabrics of satin and reverse satin structure with various lengths of underlap were studied. In the range of low tension, the satin warp knitted fabric showed larger tensile energy and elongation in the direction of $0^\circ$ and larger tensile linearity, tensile resilience and initial modulus in $90^\circ$. Meanwhile, reverse satin one showed larger initial moduli in 0$^{\circ}$ and larger the others in $90^\circ$. In the range of high tension, the tendencies of both fabrics in $0^\circ$ direction were almost the same as those in all direction. As the under laps were shorter for both fabrics, tensile linearity, tensile energy and elongation increased, but tensile resilience decreased in all directions. However initial moduli were changed little.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.80-85
• /
• 2018

Chloro isobutylene isoprene rubber (CIIR) and ethylene propylene diene monomer (EPDM) compounded with other formulation chemicals, depending on the polymer blend, were prepared by mechanical mixing. After manufacturing the rubber vulcanizate by compression molding with a hot press, the mechanical and thermal properties including thermal conductivity, rebound resilience of the CIIR/EPDM blends were measured. As the EPDM rubber content increased, hardness and tension set showed a tendency to increase. Pure CIIR exhibited the lowest tensile strength; however, tensile strength increased with loading of EPDM rubber. On the other hand, in CIIR rubber, which is usually a low-rebound elastomer owing to a high damping effect, rebound resilience exhibited an increasing trend as the content of EPDM rubber increased. As the EPDM rubber content increased, thermal stability was improved due to reduction of decomposition rate in the rubber region of the blend vulcanizate.

• 한국조경학회지
• /
• 제38권5호
• /
• pp.93-101
• /
• 2010

탄성포장은 보행자의 만족감이 매우 높아 수요가 지속적으로 증가할 것으로 예상되나, 탄성포장의 재료 배합기준 즉, 합성고무 칩(EPDM chip)과 폴리우레탄 바인더의 적정배합기준이 미비하여 시공 시 많은 시행착오를 겪고 있는 실정이다. 따라서, 본 연구는 조경용 탄성포장의 폴리우레탄 바인더 배합비에 따른 결합력과 반발탄성의 변화를 실험을 통해 분석하고, 이를 바탕으로 적정한 재료배합 비율을 제시하고자 하였으며, 실험결과는 다음과 같다. 인장실험에서는 시료 B와 시료 C가 바인더 배합비율과 인장강도 간에 강한 양의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 인장강도가 증가한다는 것을 알 수 있다. 경도실험에서는 시료 A,시료 B,시료 C모두 바인더 배합비율과 경도 간에 통계적으로 상관관계가 없는 것으로 나타나, 탄성포장재의 경도는 바인더의 배합비율에 따라 달라지지는 않는 것으로 판단된다. 반발탄성실험에서는 시료 A와 시료 B가 배합비율과 반발탄성 간에 강한 음의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 반발탄성이 낮아진다는 것을 알 수 있다. 실험결과를 바탕으로 적정배합비율을 분석해 보면 인장강도의 경우, 인장강도의 증가가 둔화되거나 오히려 감소하는 배합비율 포인트는 20%이며, 반발탄성의 경우, 반발탄성이 급격하게 감소하는 배합비율 포인트는 22%이다. 따라서 두가지 요인을 감안할 때, 적정 배합비는 20~22% 사이로 판단된다. 본 연구의 결과는 조경용 탄성포장 시공 시 결합력과 탄성을 제고할 수 있는 재료배합의 지침을 제공할 수 있을 것으로 기대된다.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.635-640
• /
• 2012

In this study, thermoplastic urethane (TPU) coating yarns were prepared at various extruding temperatures. The fine structure and mechanical properties of resultant TPU coating yarns examined by the wide angle X-ray diffractometer (WAXD), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and tensile test. TPU coating yarns (prepared at extruding temperatures at $175^{\circ}C$) were confirmed as a stable fine structure that obtained excellent tensile strength and flexibility. The C samples prepared by optimized conditions made by TPU woven floor mat. The structure of the woven mat is $4{\times}4$ basket weave and have laminated with the EVA foam to obtained final TPU woven floor mat products. The resultant TPU woven floor mat was obtained to 1.5MN of tensile strength, 22% of the elongation, and 0.2MN of tear strength. The weight loss abrasion and the resilience by the ball rebound of the TPU-woven floor mat was prior to those of the PVC subsequently, we were able to develop a woven floor mat with TPU coating yarn and produce an eco-friendly high valuable woven floor mat using an interior product.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.660-666
• /
• 2004

This article describes the change of hand value of chitosan crosslinked cotton fabrics. The chitosan crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH) as crosslinkins agent, 2% aqueous acetic acid as a solvent of chitosan and ECH, and 20% aqueous sodium hydroxide as a mercerizing agent and crosslinking catalyst. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle, mercerized and crosslinked in NaOH solution, and finally wash and dry. Mechanical and physical properties of the chitosan crosslinked fabric were investigated using Kawabata Evaluation System(KES) and other instruments. Tensile energy and tensile strain were decreased with the increase of the concentration of chitosan. Tensile resilience, compression resilience bending rigidity, bending hysteresis, shear stiffness, shear hysteresis, coefficient of friction, geometrical roughness, compression linearity, compressional energy, and thickness were increased with the increase of the concentration of chitosan. On the other hand, bending rigidity, bending hysteresis, coefficient of friction, geometrical roughness, compressional resilience, and thickness were increased with the increase of the concentration of crosslinking agent(epichlorohydrin).

• 한국의류학회지
• /
• 제22권6호
• /
• pp.609-609
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.699-705
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.69-75
• /
• 2009

본 연구에서는 폐윤활유를 이용하여 아스팔트 포장도로의 균열 보수에 주로 사용하는 아스팔트 실란트를 제조하였다. 아스팔트(AP-5), SBS 삼블록 공중합체(triblock copolymer), 점착제(석유수지) 및 산화방지제를 폐윤활유와 혼합하여 콘 침입도, 연화점, 신도, 흐름성, 인장 접착 신율 및 원상회복률을 측정하였다. 폐윤활유 함량이 증가함에 따라 아스팔트 실란트의 콘 침입도는 증가하였고 연화점, 신도 및 원상회복률은 감소하였다. 증량제로 탈크를 첨가할 경우 함량에 비례하여 연화점 및 원상회복률은 증가하였으나 콘 침입도, 신도 및 인장 접착 신율은 감소하였다. 석유수지 함량을 크게 줄여 ASTM 규격에 적합하면서도 가장 경제적인 균열 보수용 아스팔트 실란트를 제조할 수 있었다.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.10-19
• /
• 1998

This study surveys the mechanical properties such as tensile and compressional properties to the weight reduction rate of PET fabrics with various weft linear densities, weft t.p.m. and desities. 18 kinds of plain and 12 kinds of satin weave fabrics were woven and processed with variation of weight reduction rate(0％, 12％, 25％ and 30％) in dyeing and finishing processes. Tensile work, resilience and compressional work and resilience of these finished fabrics treated with different weight reduction rates were measured by KES-FB System and discussed with various wok linear densities, weft t.p.m., densities, and weight reduction rates.