• 한국자기학회지
• /
• 제1권2호
• /
• pp.89-93
• /
• 1991

회전축에 부착된 두 코아가 회전축의 토오크에 의하여 인장응력과 압축응력을 받게하여 두 코아의 최대자기유도 차이를 피측정량으로 하는 새로운 비접촉 토오크 센서를 제작하였다. 제작된 토오 크센서는 선형도가 1% 정도였으며 과도현상적인 토오크를 자화주파수와 동일한 10 kHz 의 샘플링주파수 로 측정 가능하게 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.295-299
• /
• 1996

Intrinsic Fabry-Perot Optical fiber sensors were embedded to tensile side of the 20cm$\times$20cm$\times$150cm cement concrete structures. The sensors were attached to the reinforcing steels and then, the cement concretes were applied. It took 30 days for curing the specimens. After that, the specimens were tested with 4-point bending method by universal testing machine. Strains were measured and recorded by the strain gauges embedded near optical fiber sensors. Output data of fiber sensor showed good linearity to the strain data from the strain gauges up 2000microstrain. The optical fiber sensors showed good response after yielding of structure while embedded metal film strain gauges did not show any response. We also specimens were broken down. In conclusion, the optical fiber sensors can be used as elements of health monitoring systems for cement concrete infra-structures.

• 대한기계학회논문집A
• /
• 제32권12호
• /
• pp.1153-1160
• /
• 2008

In this paper, the algorithm of Abaqus UMAT is introduced to analyze the shape memory alloy. The SMA has two main effects which show non-linearity. Due to this, it is hard to analyze SMA using analysis tools and to describe all of two effects. Therefore, in this study, the program using Abaqus UMAT based on Modified Brinson model is used to analyze SMA. The martensite fraction, the most important factor which defines SMA motion, is also calculated by Fortran program in UMAT. In addition, the tensile test of SMA specimen is conducted. The availability of algorithm is proved by comparing analysis to experimental result.

• Structural Engineering and Mechanics
• /
• 제22권1호
• /
• pp.107-130
• /
• 2006

The paper deals with the numerical solution of the dynamic problem of masonry structures. Masonry is modelled as a non-linear elastic material with zero tensile strength and infinite compressive strength. Due to the non-linearity of the adopted constitutive equation, the equations of the motion must be integrated directly. In particular, we apply the Newmark or the Hilber-Hughes-Taylor methods implemented in code NOSA to perform the time integration of the system of ordinary differential equations obtained from discretising the structure into finite elements. Moreover, with the aim of evaluating the effectiveness of these two methods, some dynamic problems, whose explicit solutions are known, have been solved numerically. Comparisons between the exact solutions and the corresponding approximate solutions obtained via the Newmark and Hilber-Hughes-Taylor methods show that in the cases under consideration both numerical methods yield satisfactory results.

• 한국지역사회생활과학회지
• /
• 제23권3호
• /
• pp.317-328
• /
• 2012

In this study, printing was introduced to the common dip-dyeing method of persimmon juice dyeing so as to develop two different colored persimmon juice dyed fabrics with printings of 'jorangmal' patterns (a national monument) instead of producing a plain textile. Following are the results of a comparative study between the persimmon dyed fabric and undyed fabric, both with printings, in terms of its properties, and hand values. Cotton and rayon were chosen as samples and were compared separately. Firstly, the samples showed differences in terms of clarity and visual sensation depending on the presence of persimmon dye, even if the same pattern and color was used. Secondly, the air permeability of two samples improved after persimmon dyeing even though their thickness increased, and their moisture regain increased as well in all humidity conditions. Thirdly, protectiveness against UV increased in dyed samples, and sweat, sunlight, and compound colorfastness improved in printed dye-fabrics compared to plain dyed ones. Therefore, printing proved to be effective in preventing discoloration. Fourthly, tensile linearity and resilience, bending rigidity, compressive linearity and resilience, and shearing stiffness increased more in the dyed samples compared to undyed ones. However, shearing recovery decreased in both dyed fabrics. Fifthly, the result of its hand value showed that Koshi value increased in all samples than undyed ones, whereas Fukurami, Numeri, and Softosa values decreased. Incorporating printing in persimmon dyeing process could expect creative outcomes not only in today's diverse fashion but in areas of arts or crafts as well.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.52-58
• /
• 1996

In order to study an applicable level for the graft finish of silk filaments and the characteristics of silk fabric, some sample fabrics were woven with grafted weft and the characteristics of sample fabrics were analyzed to evaluate the mechanical properites and the handle values according to the graft yield(%) of MMA and HEMA monomers on silk filaments. 1. The tensile properties were detected in the increase of linearity(LT) and the recovery in time of the increasing resilience(RT). 2. The bending properties were detected to have a lot of effect on the balance of bending rigidity(B) to hysteresis(2HB) according to the elastic relaxation of warp tension and the interlacing stress. 3. The shearing properities were detected to show the softness and the elastics in a case of the decrease in shearing rigidity(G) and hysteresis(2HG, 2HG5) according to the graft yields. 4. The compression properties were detected in the decrease of linearity(LC) and the uniformity of resilience(RC). It explains that the tendancies of compressible variation is not accepted. 5. The surface properities were detected to be affected by the surface forms of grafted silk filaments and the variation in the morphologies of interlacing sections. Considering the interlacing eveness, MMA grafted fabrics were accepted within the level of WOMEN'S THIN DRESS(KN-201-LDY) but HEMA grafted fabrics were not accepted. 6. The variation of handles were detected in the increase of total hand(TAV) within the levels of 65% of KOSHI and 82% of HARI on the average. 7. The handle fashions were detected in the nature of Habuta and Dechine from MAA graft but the nature of Fugi were shaped from HEMA graft in proportion to the graft yields.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.91-99
• /
• 2017

본 논문은 폴리머 모르타르로 보수된 철근콘크리트 보의 휨거동을 실험적 해석적으로 분석한 결과를 제시한다. 실험적 연구에서는 보수위치, 모르타르 재령을 실험변수로 고려하여 제작된 13개의 보에 대한 3점 휨실험이 실시되었다. 인장측 및 압축측을 보수한 실험체들의 파괴는 모르타르와 콘크리트의 계면에서 발생하지 않았으며, 폴리머 모르타르의 인장변형률이 극한변형률을 초과하는 순간 발생하였다. 압축측을 보강한 실험체들은 기준실험체의 최대하중과 유사하였다. 그들의 연성지수는 기준실험체보다 훨씬 컸다. 인장측을 보수한 실험체는 매우 취성적으로 파괴되었으며, 연성지수가 크게 감소하였다. 폴리머 모르타르로 보수된 철근콘크리트의 보의 휨거동을 예측하기 위해 Opensees을 사용한 재료비선형 해석을 진행하였다. 해석 모델을 단순화하기 위해 2차원 골조요소를 적용하였으며, 재료 비선형성을 고려하기 위해 파이버 모델을 적용하였다. 해석결과는 비선형 구조해석은 압축측 보수 실험체의 휨거동을 적절하게 예측하나, 인장측 휨거동는 다소 과대 평가하는 것으로 나타났다.

• 한국자기학회지
• /
• 제25권4호
• /
• pp.123-128
• /
• 2015

철은 강도와 경도가 높고 전기전도도가 훌륭한 원소이며, 또한 가공이 쉽기 때문에 다양한 분야에서 사용되고 있다. 교량에서는 큰 하중이면서도 경량화를 위하여 강철선으로 된 텐던이 사용되고 있다. 철이 구조용 강으로 사용될 경우 중요한 문제 중 하나인 안전 진단을 위해서는 비파괴 검사(Non-Destructive Testing)가 필수적인데 철강의 자기적 특성이 비선형의 자화곡선과 이력(hysteresis)현상이 있는 자기이력곡선으로 인하여 비파괴 검사에 적용이 어렵다. 본 연구에서는 교량에 부착되어 있는 텐던의 인장변형력을 비파괴 적이면서 자기적인 방법으로 측정하기 위한 기초 연구로, 텐던의 인장변형력에 의한 자기이력 특성변화를 관찰하기 위하여 직경 15.5 mm의 7-strand 텐던에 인장력을 0에서 2 GPa까지 인가할 수 있는 자기이력곡선 측정 장치를 제작하였다. 제작 된 자기이력곡선 측정 장치를 이용하여 시판되고 있는 두 제조회사의 텐던에 대하여 자기적 특성을 조사하였고, 인장변형력에 따른 자기적 특성의 변화가 가장 큰 부분은 자기이력곡선 상의 knee 부분 근처에서의 상대 진폭투자율로 500에서 200까지 감소하였으며 최대 자속밀도 또한 0.6 T 정도로 변화하였다. 텐던의 인장변형력을 측정하는 방법으로 knee 부분의 진폭투자율 측정뿐만 아니라 최대 자속밀도의 측정방법도 가능할 것으로 생각된다.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.620-629
• /
• 2013

This study examines the rustling sound characteristics of electrospun nanofiber web laminates according to layer structures. This study assesses mechanical properties and frictional sounds (such as SPL); in addition, Zwicker's psychoacoustic parameters (such as Loudness (Z), Sharpness (Z), Roughness (Z), and Fluctuation strength (Z)) were calculated using the Sound Quality Program (ver.3.2, B&K, Denmark). The result determined how to control these characteristics and minimize rustling sounds. A total of 3 specimens' frictional sound (generated at 0.63 m/s) was recorded using a Simulator for Frictional Sound of Fabrics (Korea Patent No. 10-2008-0105524) and SPLs were analyzed with a Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured with a KES-FB system. The SPL value of the sound spectrum showed 6.84~58.47dB at 0~17,500Hz. The SPL value was 61.2dB for the 2-layer PU nanofiber web laminates layered on densely woven PET(C1) and was the highest at 65.1dB for the 3-layer PU nanofiber web laminates (C3). Based on SPSS 18.0, it was shown that there is a correlation between mechanical properties and psychoacoustic characteristics. Tensile properties (LT), weight (T), and bending properties (2HB) showed a high correlation with psychoacoustic characteristics. Tensile linearity (LT) with Loudness (Z) showed a negative correlation coefficient; however, weight (T) with Sharpness (Z) and Roughness (Z), and bending hysteresis (2HB) with Roughness (Z) indicated positive correlation coefficients, respectively.

• 한국의상디자인학회지
• /
• 제10권3호
• /
• pp.173-180
• /
• 2008

Cotton, wool, cotton/wool blended (80:20) and tencel fabrics were treated with low temperature oxygen plasma, enzymes (cellulase or protease), or oxygen plasma-enzyme and they were examined for dyeing and handling properties for environment friendly finishing. The appropriate conditions for cellulase treatment were enzyme concentration of 3g/l, pH of 5, and $60^{\circ}C$ for one hour, and for protease treatment were enzyme concentration of 4g/l, pH of 8, and $60^{\circ}C$ for one hour. The equilibrium uptake of a direct dye on cotton changed with plasma treatment and plasma-cellulase treatment, and the rate of dyeing slightly decreased. When wool was dyed with acid dye, the equilibrium dye uptake did not change with plasma, protease treatment nor plasma-protease treatment, however, the rate of dyeing had increased with plasma-protease treatment. From these results, it is assumed that plasma attacks the surface of the fiber, and enzyme mainly affects the inner part of the fiber. Plasma treatment did not affect mechanical properties related to the handling of fabrics. The handling test showed increased extension at maxmum load(EM), tensile energy(WT) with decreased tensile resilience (RT), and the fabrics became softer but resilience decreased slightly with enzyme treatment. The bending recidity(B), hysteresis of bending moment(2HB), and hysteresis of shear force at five degrees(2HG5) decreased, however, shear stiffness(G) increased. I knew the plasma pre-treatment made fabrics softer with lower koshi(stiffness). The handling of plasma pre-treated fabrics was better than that of enzyme-treated fabrics. When we pre-treated fabrics, the handling test showed decreased coefficient of friction(MIU), geometrical roughness(SMD), while the surface of fabrics became smoother and numeri increased. Even though compression resilience(RC) increased, fukurami(bulky property) and compressive elasticity, decreased due to the linearity of compression-thickness curve(LC) and compression energy(WC).