• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.477-482
• /
• 2001

A study was performed to determine the optimum height for an arc air gouging of temporary attachments, which were attached at the pressure vessel made of low alloy steel. Frequently, the crack occurred in the base metal by the excessive heat input during an arc air gouging process to remove the temporary attachments. A numerical analysis by 2-dimensional finite element method was performed to calculate the temperature distribution in the base metal during the removal of temporary attachments. And then the mock-up test was performed to verify the numerical results. Numerical values showed good agreement with the experimental results. These results indicated that the defects due to the excessive heat input during an arc air gouging were dependent on the height of temporary attachments remained above hie main products.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1059-1064
• /
• 2018

Many users feel a great pain owing to losing edited files. It is very serious loss in time and money. This problem occurs because email attachments are edited in 'Inbox' and the compute immediately shuts down with 'Save'. This is caused by the illusion that the 'save' in a temporary folder is saved to a secure hard disk. Our thesis proposes a loss-prevention system WatchDog for safe storage and folder management of the e-mail attachments. The proposed system operates a warning window pop-up when we 'Open(O)' and 'Save' the attachment. In addition, convenient folder management plans for safe copying and movement are shown through example programs.

• The Journal of the Korean dental association
• /
• v.54 no.1
• /
• pp.39-48
• /
• 2016

SFI-bar is prefabricated bar system and can be assembled at chairside without soldering or welding, thus reducing bone loss, costs and time. A 53-year-old male patient, who had severely absorbed mandible, hoped to wear a stable mandiblular denture. Four implants were placed in the extraction site of canine and 1st molar. Early loaded temporary denture with solitary type attachment was delivered 3 weeks after surgery. 3 month later, SFI-bar was connected and adjusted at chairside. Then, implant overdenture using SFI-bar was delivered. This case report showed that a satisfactory clinical result was achieved by 4-implant-supported overdenture using the SFI-Bar system in a mandibular edentulous patient.

• Journal of Chest Surgery
• /
• v.36 no.9
• /
• pp.633-637
• /
• 2003

Sometimes temporary tricuspid valve detachment is applied for closure of ventricular septal defect to facilitate good exposure and avoiding ventriculotomy, but most surgeons hesitate to do it in the fear of tricuspid incompetence. Moreover in recent textbooks the technique of temporary tricuspid detachment is only described for exceptional situations and is not further analysed or commented on. Material and Method: Retrospective study was carried out in all 11 patients operated between 1985 to 1994, with preoperative data and postoperative course and recent echocardiographic and electrocardiographic data. Result: On the basis of the area of the color flow jet, tricuspid valvular regurgitation was graded as none in 9 and trivial in 2, and significant electrocardiographic heart block did not developed in any patients. Conclusion: Takedown and attachment of the tricuspid valve is a safe and effective technique that improves exposure for ventricular septal defect, and does not adversely effect tricuspid valve competence and electrocardiography.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.125-136
• /
• 2023

Before progress was recently made in the application of temporary anchorage devices (TADs) in bio-mechanical design, orthodontists were rarely able to intrude molars to reduce upper posterior dental height (UPDH). However, TADs are now widely used to intrude molars to flatten the occlusal plane or induce counterclockwise rotation of the mandible. Previous studies involving clinical or animal histological evaluation on changes in periodontal conditions after molar intrusion have been reported, however, studies involving human histology are scarce. This case was a Class I malocclusion with a high mandibular plane angle. Upper molar intrusion with TADs was performed to reduce UPDH, which led to counterclockwise rotation of the mandible. After 5 months of upper molar intrusion, shortened clinical crowns were noticed, which caused difficulties in oral hygiene and hindered orthodontic tooth movement. The mid-treatment cone-beam computed tomography revealed redundant bone physically interfering with buccal attachment and osseous resective surgeries were followed. During the surgeries, bilateral mini screws were removed and bulging alveolar bone and gingiva were harvested for biopsy. Histological examination revealed bacterial colonies at the bottom of the sulcus. Infiltration of chronic inflammatory cells underneath the non-keratinized sulcular epithelium was noted, with abundant capillaries being filled with red blood cells. Proximal alveolar bone facing the bottom of the gingival sulcus exhibited active bone remodeling and woven bone formation with plump osteocytes in the lacunae. On the other hand, buccal alveolar bone exhibited lamination, indicating slow bone turnover in the lateral region.

• (The)Korea Educational Review
• /
• v.23 no.1
• /
• pp.261-285
• /
• 2017

In this study, we examined the direction of the elderly education to improve the quality of life in the intelligence information society on the basis of the wisdom shown in the "Pan-jo wu-chih lun" of Seng-Zhao. The characteristics of the elderly in the intelligence information society are four-fold. First, the elderly show no deterioration in wisdom. Second, they have a lot of leisure time. Third, they are likely not to adapt in a rapidly changing society. Fourth, they are exposed to an economically vulnerable environment. But in the intelligence information society, the elderly cannot avoid death, and it is difficult for them to have insight into their existence due to the egotism, they take the attitude of attaching themselves only to exiting things. The direction of the Elderly Education to solve the problem is as follows: First, "Learning to know that Life-and-Death-and-suffering is temporary" is to make the elderly aware that the coming mind and the disappearing mind for a specific object are temporary and S?nya. Second, "Learning to be while eliminating the egotism" is set them free from the dogmatism that there is the attan. Third, "Learning to do to break the attachment" is to disabuse them of the idea that things will turn out according to their expectation through an awakening and to transforming their behavior.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.75-93
• /
• 2002

This research was preformed for the purpose of preparing the items of standard model of the national dental technician test base on the duty analysis of the dental technician. The results of the duty analysis for the dental technician follows. 1. The dental technician is a profession to make the oral function smooth through the dental supplement and equipment in a scientific method and the skilled technique. 2. The duty of the dental technician are determined as A. preparation for manufacture B. manufacture C. management of the place of the dental technology D. self-development. A. The field of "the preparation for manufacture" are determined as 1. to confirm work authorization 2. To confirm the working model, B. The field of "In manufacture" are determined as 1. to manufacture the temporary crown 2. to manufacture the inlay and crown & bridge prosthesis 3. to manufacture the porcelain fused metal crown prosthesis 4. to manufacture the all ceramic crown prosthesis 5. to manufacture the temporary denture prosthesis 6. to manufacture the partial denture prosthesis 7. to manufacture the complete denture prosthesis 8. to manufacture the attachment prosthesis 9. to manufacture implant prosthesis 10. to manufacture the removable orthodontic device, 11. to manufacture the fixed orthodontic device, 12. to manufacture the orthodontic study cast C. The field of "in management of the dental lab." are determined as 1. management 2. to control the dental lab. D. The field of "In the self-development" are determined as 1. to improve the professionalism 2. self-control. 3. The developing items selected under the duty evaluation of the dental technician are l7s in the manufacture preparation, 1,011s in the manufacture, 7s in the management for the dental technology, 5s in self-development, and in all together 1,040s

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.51-60
• /
• 2020

This study aimed to develop a modular smart clothing system for heart rate monitoring that reduces the inconvenience caused by battery charging and the large size of measurement devices. The heart rate monitoring system was modularized into a temporary device and a continuous device to enable heart rate monitoring depending on the requirement. The temporary device with near-field communication (NFC) and heart rate sensors was developed as a clothing attachment type that enables heart rate monitoring via smart phone tagging when required. The continuous device is based on Bluetooth Low Energy (BLE) communication and batteries and was developed to enable continuous heart rate measurement via a direct connection to the temporary device. Furthermore, the temporary device was configured to connect with a textile electrode made of a silver-based knitted fabric designed to be located below the pectoralis major muscle for heart rate measurement. Considering the user-experience factors, key functions, and the ease of use, we developed an application to automatically log through smart phone tagging to improve usability. To evaluate the accuracy of the heart rate measurement, we recorded the heart rate of 10 healthy male subjects with a modular smart clothing system and compared the results with the heart rate values measured by the Polar RS800. Consequently, the average heart rate value measured by the temporary system was 85.37, while that measured by the reference device was 87.03, corresponding to an accuracy of 96.73%. No significant difference was found in comparison with the reference device (T value = -1.892, p = .091). Similarly, the average heart rate measured by the continuous system was 86.00, while that measured by the reference device was 86.97, corresponding to an accuracy of 97.16%. No significant difference was found in terms of the heart rate value between the two signals (T value = 1.089, p = .304). The significance of this study is to develop and validate a modular clothing system that can measure heart rates according to the purpose of the user. The developed modular smart clothing system for heart rate monitoring enables dual product planning by reducing the price increase due to unnecessary functions.

• Journal of Engineering Education Research
• /
• v.20 no.5
• /
• pp.3-13
• /
• 2017

The purpose of this study was to investigate the effect that completing long-term on-site training with varying grades of success had on the job satisfaction of former university students after obtaining employment. Although the grades themselves achieved during long-term on-site training did not directly affect job satisfaction, positive effects on job satisfaction were shown due to the mediating effects of job match and organizational commitment. The results of this study are as follows: First, it was found that employees who participated in long-term on-site training showed different results in belonging and attachment to their organizations according to their achievement. The higher the grades during long-term on-site training, the higher the degree of reported job match and organizational commitment, suggesting a positive correlation with job satisfaction. Therefore, long-term on-site training should not be operated as simply a program for temporary experiential learning, but instead should be optimized by companies and schools to motivate their students to achieve high grades for the purpose of their future job satisfaction.

• Journal of the Korean Society for Library and Information Science
• /
• v.51 no.2
• /
• pp.73-93
• /
• 2017

The National Library of Korea installs and operates various signs for the purpose of efficient use of visitor and information transmission. In this study, the present status of the existing signatures of the National Library of Korea was surveyed and the satisfaction survey was conducted for the patron and staff. Based on this, we suggested the improvement of visual continuity (connectivity), changing the installation location, reduction of excess sign, limitations of temporary attachment signatures, and easy to understand contents as user's guide to efficient library use and improvement of National Central Library sign system.