• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.3
• /
• pp.46-59
• /
• 1999

Remote sensing provides informations on the changes of the hydrological states and variables over with the temporal and spatial distribution to monitor hydrological conditions and changes for large area. Especially, it can extract a spatial distribution of hydrological parameters such as surface albedo, vegetation informations, and surface temperature to effectively manage water resources of the watershed. In this study, we analyzed the characteristic of temporal and spatial changes in surface hydrological parameters which is necessary to identify the spatial distribution of water resources. 5 Landsat TM data of 1995 which is collected for Bochong-chon watershed, located in the upper stream of Keum River, were used to estimate characteristics on the change of hydrological parameters and atmospheric correction was carried out using COST model. The study showed that the difference of the albedo by the land cover was very sensitive depending upon the change of sun elevation and the amount of water in the soil. The difference between the surface temperature analysis and the measured air temperature was from $2.5^{\circ}C$ to $3.86^{\circ}C$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.164-172
• /
• 2008

This paper presents the efficient localization of a mobile robot traveling on the floor with tags installed, using the spatial and temporal information acquired from passive RFID environment. Compared to previous research, the proposed localization method can reduce the position estimation error and also cut down the initial cost tag installation cost. Basically, it is assumed that a mobile robot is traveling over a series of straight line segments, each at a certain constant velocity, and that the number of tags sensed by a mobile robot at each sampling instant is at most one. First, the velocity and position estimation of a mobile robot starting from a known position, which is valid for all segments except the first one. Second, for the first segment in which the starting position is unknown, the velocity and position estimation is made possible by enforcing a mobile robot to traverse at least two tags at a constant velocity with the steering angle unchanged. Third, through experiments using our passive RFID localization system, the validity and performance of the mobile robot localization proposed in this paper is demonstrated.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.491-506
• /
• 2015

Distributed models represent watersheds using a network of numerous, uniform calculation units to provide spatially detailed and consistent evaluations across the watershed. However, these models have a disadvantage in general requiring a high computing cost. Semi-distributed models, on the other hand, delineate watersheds using a simplified network of non-uniform calculation units requiring a much lower computing cost than distributed models. Employing a simplified network of non-uniform units, however, semi-distributed models cannot but have limitations in spatially-consistent simulations of hydrogeochemical processes and are often not favoured for such a task as identifying critical source areas within a watershed. Aiming to overcome these shortcomings of both groups of models, a hybrid watershed model STREAM (Spatio-Temporal River-basin Ecohydrology Analysis Model) was developed in this study. Like a distributed model, STREAM divides a watershed into square grid cells of a same size each of which may have a different set of hydrogeochemical parameters reflecting the spatial heterogeneity. Like many semi-distributed models, STREAM groups individual cells of similar hydrogeochemical properties into representative cells for which real computations of the model are carried out. With this hybrid structure, STREAM requires a relatively small computational cost although it still keeps the critical advantage of distributed models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.523-531
• /
• 2007

In this paper, we are going to develop a newly designed indexing scheme which is compatible to manage the moving objects and propose a cost model of the scheme. We propose a dynamic hashing index that insertion/delete costs are low. The dynamic hashing structure is that apply dynamic hashing techniques to combine a hash and a tree to a spatial index. We analyzed the dynamic index structure and the cost model by the frequent position update of moving objects and verified through a performance assessment experiment. The results of our extensive experiments show that the newly proposed indexing schemes(Dynamic Hashing Index) are much more efficient than the traditional the fixed grid and R-tree.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.345-351
• /
• 2007

The research which it sees will confront to the coating with paint material and a coating with paint public law application of the river bridge and it will present it will sleep and it will execute, it will reach and a comparison - an analysis from the research which it tries to respect middle of special environment the polyurethane system which is a method coating with paint system and fluorine resin system, against a ceramic system it executed more an objectivity and rational fundamental data. With research method against each coating with paint evening sunlight a research investigation material and structure, it separated with spatial-temporal characteristic and economic viewpoint it executed. When considering overview from material viewpoint, fluorine resin system ceramic system polyurethane system pure with it is judged with the fact that it is excellent. There is a possibility of saying that the coefficient of friction of the fluorine resin system which uses the weapon quality zinc end coating compound ever so hard and polyurethane system is excellent ceramic system than from structure viewpoint. That fluorine resin system = polyurethane system ceramic system pure with it is excellent, it is judged from spatial-temporal characteristic viewpoint. It measures but it considered an internal troubles year grudge in the standard which becomes disturbance the place where it executes the market the expectation life person of the general bridge against 100 years the result fluorine resin system polyurethane system ceramic system which compares a materials unit cost pure with it appeared.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.7
• /
• pp.354-360
• /
• 2008

Power-related issues have become important considerations in current generation microprocessor design. One of these issues is that of elevated on-chip temperatures. This has an adverse effect on cooling cost and, if not addressed suitably, on chip reliability. In this paper we investigate the general trade-offs between temporal and spatial hot spot mitigation schemes and thermal time constants, workload variations and microprocessor power distributions. By leveraging spatial and temporal heat slacks, our schemes enable lowering of on-chip unit temperatures by changing the workload in a timely manner with Operating System (OS) and existing hardware support.

• Smart Media Journal
• /
• v.1 no.3
• /
• pp.15-21
• /
• 2012

Depth information is necessary for various three dimensional contents generation. Depth acquisition techniques can be categorized broadly into two approaches: active, passive depth sensors depending on how to obtain depth information. In this paper, we take a look at several ways of depth acquirement. We present not only depth acquisition methods using discussed ways, but also hybrid methods which combine both approaches to compensate for drawbacks of each approach. Furthermore, we introduce several matching cost functions and post-processing techniques to enhance the temporal consistency and reduce flickering artifacts and discomforts of users caused by inaccurate depth estimation in 3D video.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.408-427
• /
• 2011

Intensive computational complexity is an obstacle of enabling multiview video coding for real-time applications. In this paper, we present a fast macroblock (MB) mode selection algorithm for B frames which are based on the computational complexity analyses between the MB mode selection and reference frame selection. Three strategies are proposed to reduce the coding complexity jointly. First, the temporal correlation of MB modes between current MB and its temporal corresponding MBs is utilized to reduce computational complexity in determining the optimal MB mode. Secondly, Lagrangian cost of SKIP mode is compared with that of Inter $16{\times}16$ modes to early terminate the mode selection process. Thirdly, reference frame correlation among different Inter modes is exploited to reduce the number of reference frames. Experimental results show that the proposed algorithm can promote the encoding speed by 3.71~7.22 times with 0.08dB PSNR degradation and 2.03% bitrate increase on average compared with the joint multiview video model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.195.1-195.1
• /
• 2016

Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.19-32
• /
• 1999

In this study, the trip characteristics of workers in the city are systematically analyzed. The trip behaviors and socioeconomic characteristics of workers are analyzed using Person Trip Survey Data of 1988 and 1992 in Taegu Metropolitan area. With the results of behavioral analyses, the daily travel pattern of workers is shown as one tour contained two trips and it is relatively simple and stable. Also the rate using the same mode in a day is Presented as high ratio. So, it can be explained that the choice of worker\`s first trip is fixed his/her travel mode for his/her daily travel mode. Based on these analyses, the mode choice model for workers is developed by applying the Multi-nominal Logit Model with the choice set of bus, taxi, and car. The explanatory variables of this model include sex, age, auto, travel time, and cost. Empirical tests of the model show encouraging results. After that, the temporal transferability of the model is examined by the Pairwise t-test and five indexes far the model of 1988 and 1992. The results of examination are satisfied with each significance level of the explanatory variables and five indexes. Therefore. it can be concluded that the temporal transferability of this model developed in this study is resonable.