• 제목/요약/키워드: Temperature-dependence

검색결과 2,088건 처리시간 0.03초

$n-CdS_{0.46}Se_{0.54}/p-Cu_{2-X}S_{0.46}Se_{0.54}$ 이종접합 태양전지의 제작과 그 특성에 관한 연구 (The Study of the Fabrication and Characteristics of $n-CdS_{0.46}Se_{0.54}/p-Cu_{2-X}S_{0.46}Se_{0.54}$ heterojunction Solar Cells)

  • 유상하;최승평;이상열;홍광준;서상석;김혜숙;전승룡;윤은희;문종대;신영진;정태수;신현길;김택성;유기수
    • 태양에너지
    • /
    • 제13권1호
    • /
    • pp.49-58
    • /
    • 1993
  • 승화방법에 의해 $CdS_{0.46}Se_{0.54}$ 단결정을 성장하여 결정구조를 조사하고, Van der Pauw 방법으로 Hall effect를 측정하여 carrier density의 온도 의존성과 mobility의 온도 의존성을 조사하였다. 성장된 $CdS_{0.46}Se_{0.54}$ 단결정을 치환반응하여 $n-CdS_{0.46}Se_{0.54}/p-Cu_{2-X}S_{0.46}Se_{0.54}$ 이종접합 태양전지를 제작하였다. Spectral response, 전류-전압특성 및 전력변환 효율을 조사하여 그 결과로부터 개방전압은 0.48V, 단락 전류 밀도는 $21mA/cm^2$, fill factor와 전력변환효율은 각각 0.75와 9.5%를 얻었다.

  • PDF

반응 금속 침투법에 의한 $Al/Al_2O_3$복합체의 제조 및 기계적 특성 (Fabrication and mechanical properties of $Al/Al_2O_3$ composites by reactive metal penetration method)

  • 윤영훈;홍상우;최성철
    • 한국결정성장학회지
    • /
    • 제11권6호
    • /
    • pp.239-245
    • /
    • 2001
  • 뮬라이트 preform과 비정질 실리카를 알루미늄 용융체에서 $1100^{\circ}C$, 5시간 동안 반응시켜 $Al/Al_2O_3$복합체가 제조되었다. 뮬라이트 preform과 알루미늄 용융체 간의 화학적 반응은 상호 연결된 미세구조를 형성하였다. $Al/Al_2O_3$복합체의 금속의 양은 뮬라이트 preform의 소결 온도($1600^{\circ}C$, $1625^{\circ}C$, $1650^{\circ}C$, $1700^{\circ}C$)에 따른 겉보기 기공율의 변수로서 조절되었으며, 복합체의 기계적 특성들은 알루미늄 양에 따라 조사되었다. $1600^{\circ}C$ 이상의 온도에서 소결된 뮬라이트 preform은 침투된 알루미늄 용융체와 화학반응을 이루었으나, $1600^{\circ}C$에서 소결된 뮬라이트 소결체는 알루미늄 용융체에 대해 젖음이 이루어지지 않아 화학반응이 진행되지 않았다. 알루미늄 용융체의 침투 방향에 따른 복합체의 기계적 특성에 대한 영향은 알루미늄 용융체의 수직, 평행한 침투 방향 패턴의 두 가지 다른 모델들에 의해 고려되었다. $Al/Al_2O_3$복합체에서 알루미늄의 양의 증가에 따라 파괴강도는 감소하였으며, 파괴인성은 증가하는 경향을 나타냈다.$ Al/Al_2O_3$복합체의 미세구조는 금속의 침투 방향에 의해 결정되었지만, 복합체의 파괴강도와 파괴인성은 금속 침투 방향에 대한 의존성은 나타내지 않았다.

  • PDF

The recombination velocity at III-V compound heterojunctions with applications to Al/$_x$/Ga/$_1-x$/As-GaAs/$_1-y$/Sb/$_y$/ solar cells

  • 김정순
    • 전기의세계
    • /
    • 제28권4호
    • /
    • pp.53-63
    • /
    • 1979
  • Interface recombination velocity in $Al_{x}$G $a_{1-x}$ As-GaAs and $Al_{0.85}$, G $a_{0.15}$ As-GaA $s_{1-y}$S $b_{y}$ heterojunction systems is studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n $Al_{x}$G $a_{1-x}$ As-GaA $s_{1-y}$S $b_{y}$-A $l_{x}$G $a_{1-x}$ As double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAs Sb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates. In the AlGaAs system, elastic lattice deformation with effective Poisson ratios .mu.$_{eff}$ (100=0.312 and .mu.$_{eff}$ (111B) =0.190 was observed. The lattice constant $a_{0}$ (A $l_{x}$G $a_{1-x}$ As)=5.6532+0.0084x.angs. was obtained at 300K which is in good Agreement with Vegard's law. In the GaAsSb system, although elastic lattice deformation was observed in (111) B-oriented crystals, misfit dislocations reduced the Poisson ratio to zero in (100)-oriented samples. When $a_{0}$ (GaSb)=6.0959 .angs. was assumed at 300K, both (100) and (111)B oriented GaAsSb layers deviated only slightly from Vegard's law. Both (100) and (111)B zero-mismatch $Al_{0.85}$ G $a_{0.15}$As-GaA $s_{1-y}$S $b_{y}$ layers were grown from melts with a weight ratio of $W_{sb}$ / $W_{Ga}$ =0.13 and a growth temperature of 840 to 820 .deg.C. The corresponding Sb compositions were y=0.015 and 0.024 on (100) and (111)B orientations, respectively. This occurs because of a fortuitous in the Sb distribution coefficient with orientation. Interface recombination velocity was estimated from the dependence of the effective minority carrier lifetime on double-heterojunction spacing, using either optical phase-shift or electroluminescence timedecay techniques. The recombination velocity at a (100) interface was reduced from (2 to 3)*10$^{4}$ for y=0 to (6 to 7)*10$^{3}$ cm/sec for lattice-matched $Al_{0.85}$G $a_{0.15}$As-GaA $s_{0.985}$S $b_{0.015}$ Although this reduction is slightly less than that expected from the exponential relationship between interface recombination velocity and lattice mismatch as found in the AlGaAs-GaAs system, solar cells constructed from such a combination of materials should have an excellent spectral response to photons with energies over the full range from 1.4 to 2.6 eV. Similar measurements on a (111) B oriented lattice-matched heterojunction produced some-what larger interface recombination velocities.ities.ities.s.

  • PDF

Micro-pulling down법을 이용한 $Al_2$O$_3$/ZrO$_2$eutectic fiber의 제조 및 기계적 특성 (Growth $Al_2$O$_3$/ZrO$_2$eutectic fibers by the micro-pulling down method and its mechanical properties)

  • 이종호;;;윤대호
    • 한국결정성장학회지
    • /
    • 제10권5호
    • /
    • pp.345-349
    • /
    • 2000
  • Micro-pulling down법을 이용하여 $Al_2O_3/ZrO_2$eutectic fiber를 제조하여 그 미세구조 및 기계적 특성과 성장속도의 관계를 조사하였다. 성장속도는 0.1~15 mm/min였으며, 직경 0.2~2 mm, 길이 500 mm의 eutectic fiber를 제조하였다. $Al_2O_3/ZrO_2$eutectic fiber의 미세구조는 성장속도에 따라 rod-shape structure에서 lameller structure를 거쳐 lamellar pattern을 갖는 cellular structure로 변화하였다. lamellar thickness는 성장속도가 1 mm/min에서 15 mm/min로 증가함에 따라 380 nm에서 110 nm로 감소하였다. 이와 같은 성장속도에 따른 lamellar thickness의 감소경향은 inverse-square-root로 나타내면, = 1 -l/2와 같이 표현할 수 있다. 여기서 는 m, 는 m/s의 단위를 갖는다. 13.1 Gpa의 hardness, 900 Mpa의 상온인장강도를 나타냈으며, 성장속도의 증가 즉, interlamellar spacing이 감소함에 따라 증가하는 경향을 나타냈다.

  • PDF

자발 성장법으로 성장된 단결정 Bi 단일 나노선의 정상 자기 저항 특성 (Ordinary Magnetoresistance of an Individual Single-crystalline Bi Nanowire)

  • 심우영;김도헌;이경일;전계진;이우영;장준연;한석희;정원용
    • 한국자기학회지
    • /
    • 제17권4호
    • /
    • pp.166-171
    • /
    • 2007
  • 단결정 Bi단일 나노선의 정상 자기 저항(ordinary magnetoresistance) 특성을 $2{\sim}300K$에서 4 단자법으로 측정하였다. I-V 측정을 통해 전기적 오믹 형성을 확인하였고, 2 K과 300 K에서 비저항이 각각 $1.0{\times}10^{-4}$$8.2{\times}10^{-5}{\Omega}{\cdot}cm$으로 측정되었다. 수직(transverse) 및 수평(longitudinal) 자기저항비(MR ratio)가 110 K와 2 K에서 각각 현재까지 보고된 MR 중 가장 큰 2496%와 -38%으로 관찰되었으며, 이 결과는 자발 성장법으로 성장된 Bi 나노선의 결정성이 매우 우수한 단결정임을 증명한다. simple two band(STB) 모델을 통해 Bi 나노선의 수직 및 수평 정상 자기 저항(OMR) 거동이 온도에 따른 페르미 준위(Fermi level)와 밴드 겹침(band overlap)등의 전자 구조 변화 및 운반자 농도 변화로 잘 설명된다.

인쇄공정으로 제조된 저항형 습도센서의 감습특성에 대한 전극패턴의 영향 연구 (The Effect of Electrode Pattern on the Humidity-sensing Properties of the Resistive Humidity Sensor Based on All-printing Process)

  • 안희용;공명선
    • 폴리머
    • /
    • 제36권2호
    • /
    • pp.169-176
    • /
    • 2012
  • 저항형 습도센서의 개발을 위하여 스크린 인쇄방법으로 glass epoxy(GE) 기재 위에 핑거의 수와 그 사이의 간격이 다른 여러 가지 바이트형의 금 전극을 제조하였다. 전극의 기본적인 구조는 핑거 수가 3, 4 및 5를 가지며 간격은 각각 310과 460 ${\mu}m$이다. 전극은 처음에 은 나노 페이스트로 전극 패턴을 인쇄하고 연속적으로 Cu, Ni 및 Au를 무전해 도금을 진행하여 제조하였다. 감습성 고분자 전해질은 [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride(MDBAC)과 methyl methacrylate(MMA)의 공중합체를 사용하였으며 스크린 인쇄 방법으로 Au 전극/GE 기재 위에 인쇄하였다. 이렇게 제조된 습도 센서의 20-95%RH 영역의 상대습도 대 로그 임피던스 그래프에서 좋은 직선성을 보여주었으며 히스테리시스는 1.5%RH 이하 및 75초의 응답 및 회복 속도를 보여주었다. 전극의 구조는 고분자 저항형 습도센서의 감습특성에 큰 영향을 미치며 전해질 고분자와 전극 사이의 활성화 에너지, 온도의존성, 감도, 직선성 및 히스테리시스와 같은 감습특성 등의 차이를 비교하였고 특히 이온의 이동에 관여하는 활성화 에너지 및 온도 의존성에 큰 영향을 미쳤다.

셀로비오스 옥타(콜레스테릴옥시카보닐)알카노에이트의 열 및 광학 특성 (Thermal and Optical Properties of Cellobiose Octa(cholesteryloxycarbonyl)alkanoates)

  • 정승용;마영대
    • 폴리머
    • /
    • 제32권3호
    • /
    • pp.230-238
    • /
    • 2008
  • 셀로비오스 옥타(콜레스테릴옥시카보닐)알카노에이트(CCBn, $n=2{\sim}8$,10, 스페이서중의 메틸렌 단위들의 수)의 열 및 광학 특성을 검토하였다. 모든 시료들은 좌측방향의 나선구조를 지닌 단방성 콜레스테릭 상들을 형성하였다. n=2 혹은 10인 CCBn은 $3{\leq}n{\leq}8$인 CCBn과 달리 콜레스테릭 상의 전 온도구간에서 반사색깔을 나타내지 않았다. 이러한 사실은 콜레스테릴 그룹에 의한 나선의 비틀림력은 콜레스테릴 그룹과 셀로비오스 사슬을 연결하는 스페이서의 길이에 민감하게 의존함을 시사한다. 액체 상에서 콜레스테릭 상으로의 전이온도($T_{ic}$)와 유리전이온도는 n이 증가함에 따라 낮아지며 홀수-짝수 효과를 나타내지 않았다. $T_{ic}$에서의 전이엔트로피는 n이 2에서 6까지 증가하나 n=7에서 급격히 감소한 후 재차 n이 8에서 10으로 증가함에 따라 증가하였다. n=7에서 급격한 변화는 곁사슬 그룹들의 배열의 차이에 의해 초래되는 것으로 생각된다. CCBn에서 관찰되는 액정 상의 열적 안정성과 질서도 그리고 광학피치의 온도의존성은 셀룰로오스 트리(콜레스테릴옥시카보닐)알카노에이트들 그리고 글루코오스 펜타(콜레스테릴옥시카보닐)알카노에이트들에 대해 보고된 결과들과 현저히 달랐다. 이들의 결과를 중합도, 글루코오스 몰 단위당의 메조겐 단위들의 수 그리고 분자들의 입체형태의 차이들의 견지에서 검토하였다.

태양전지용 $CuGaSe_2$ 단결정 박막 성장과 열처리 효과 (The Effect of Thermal Annealing and Growth of $CuGaSe_2$ Single Crystal Thin Film for Solar Cell Application)

  • 홍광준;유상하
    • 한국태양에너지학회 논문집
    • /
    • 제23권2호
    • /
    • pp.59-70
    • /
    • 2003
  • A stoichiometric mixture of evaporating materials for $CuGaSe_2$ single crystal thin films was prepared from horizontal electric furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuGaSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.615{\AA}$ and $11.025{\AA}$, respectively. To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuGaSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $5.01\times10^{17}cm^{-3}$ and $245cm^2/V{\cdot}s$ at 293K. respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T)=1.7998 eV-($8.7489\times10^{-4}$ eV/K)$T^2$/(T+335K). After the as-grown $CuGaSe_2$ single crystal thin films was annealed in Cu-, Se-, and Ga-atmospheres, the origin of point defects of $CuGaSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{CU},\;V_{Se},\;Cu_{int}$ and $Se_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuGaSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $CuGaSe_2$/GaAs did not form the native defects because Ga in $CuGaSe_2$ single crystal thin films existed in the form of stable bonds.

Co/NiMn의 교환 자기결합에 관한 연구 (Exchange coupling of Co/NiMn bilayer)

  • 안동환;조권구;주승기
    • 한국자기학회지
    • /
    • 제10권4호
    • /
    • pp.171-177
    • /
    • 2000
  • RF 마그네트론 스퍼터링 증착법으로 제작한 Co/NiMn 이층막에서의 교환자기결합현상을 연구하였다. 어닐링의 온도와 시간에 따른 교환자기결합력(H$_{ex}$)의 변화를 조사하여 300 $^{\circ}C$에서 13시간의 열처리후에 최대의 교환결합자장을 얻을 수 있음을 보였고, NiMn과 Co층의 적층순서를 변화시켰을 때, NiMn 상층구조의 시편이 더 높은 교환자기결합력을 나타냄을 알 수 있었다. 상층의 Ta 보호막의 사용이 교환자기결합을 나타내는데 필수적임을 알 수 있었는데 , AES 분석은 Ta 보호층을 적용하지 않은 경우에, 산소원자가 막 내부의 깊은 곳까지 침투함으로 인하여 교환자기결합력이 일어나지 않음을 보여주었다. 또한 교환자기결합에 대한 Ta 바닥층의 효과를 연구하였다. Ta 바닥층은 높은 교환자기결합력을 얻기 위해서는 사용하지 않는 것이 낫다는 것을 알아내었다. X선 회절분석의 결과는, Ta 바닥층이 다층막에 우선방위조직을 형성시키는데 기여하지만, NiFe/NiMn 이층막에서의 경우와는 달리 교환자기결합에 반드시 필요한 조건이 아님을 보여주었다. 또한 Co층과 NiMn층의 두께에 따른 교환결합력의 영향을 조사하여, 교환결합력은 200 $\AA$ 이상의 NiMn층 적용 시 최대값을 가지며, Co층의 두께에 반비례함을 알 수 있었다.다.

  • PDF

Hot Wall Epitaxy(HWE)법에 의한 BaAl2Se4 단결정 박막 성장과 광전도 특성 (Growth and Optical Conductivity Properties for BaAl2Se4 Single Crystal Thin Film by Hot Wall Epitaxy)

  • 정준우;이기정;홍광준
    • 센서학회지
    • /
    • 제24권6호
    • /
    • pp.404-411
    • /
    • 2015
  • A stoichiometric mixture of evaporating materials for $BaAl_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $BaAl_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $BaAl_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.29{\times}10^{-16}cm^{-3}$ and $278cm^2/vs$ at 293 K, respectively. The temperature dependence of the energy band gap of the $BaAl_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.4205eV-(4.3112{\times}10^{-4}eV/K)T^2/(T+232 K)$. The crystal field and the spin-orbit splitting energies for the valence band of the $BaAl_2Se_4$ have been estimated to be 249.4 meV and 263.4 meV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $BaAl_2Se_4/GaAs$ epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-exciton for n =1 and $C_{31}$-exciton peaks for n=31.